Publikationen

Vortrag

  • Klöpfer, E.; Springub, B.; Masimov, M.; Gershteyn, G.; Nürnberger, F.; Bach, Fr.-W. (2011): Investigation of the HSD®-Steel with a modified concentration of the aluminum contentEuromat 2011. Montpellier, Frankreich, 12.-15. September. Online verfügbar unter http://euromat2011.fems.eu/wp-content/uploads/2011/09/2011-09-05_program_complete_4days.pdf.
  • Engelhardt, M.; Bormann, D.; Haverkamp, H.; Plorin, T.; Klose, C.; Gershteyn, G.; Bach, Fr.-W. (2009): Werkstoffkundliche Analyse der Prozesskombination konventioneller und dynamischer UmformverfahrenWorkshop Impulsumformung, S. 1-19. Dortmund, 12.03.2009.
  • Springer, R.; Gershteyn, G.; Schaper, M. (2007): Numerical simulation of microstructure evolution during martensitic phase transformation of quenchenable high strength steelsAPCOM’07 in conjunction with EPMESC XI. Kyoto, Japan, 3.-06.12.2007.

Konferenz

  • Clausmeyer, T.; Gutknecht, F.; Gerstein, G.; Nürnberger, F. (2020): Testing of Formed Gear Wheels at Quasi-Static and Elevated Strain RatesIn: 23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 623-628
    DOI: 10.1016/j.promfg.2020.04.191
  • Gutknecht, F.; Gerstein, G.; Clausmeyer, T.; Nürnberger, F. (2020): Analyse der belastungspfadabhängigen Schädigungs- und Mikrostrukturentwicklung zur numerischen Auslegung von BlechmassivumformprozessenIn: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020, Posterbeitrag. TEWISS, Garbsen, 2020, S. 185-186
  • Acar, S.; Gerstein, G.; Herbst, S.; Lorenz, U.; Malik, I. Y.; Behrens, B.-A. (2019): Characterization of a modified hot-working steel with increased wear resistanceIn: Broeckmann, C. (Hrsg.): Tooling 2019 conference & exhibition. 13.05.-16.05.2019, P63
  • Acar, S.; Gerstein, G.; Nürnberger, F.; Cui, C.; Schulz, A.; Steinbacher, M.; Wunde, M.; Kurzynski, J. (2019): Deep Cryogenic Treatment of X153CrMoV12 Cold-work Tool SteelIn: Broeckmann, C. (Hrsg.): Tooling 2019 conference & exhibition. 13.05.-16.05.2019, P31
  • Behrens, B.-A.; Puppa, J.; Acar, S.; Gerstein, G.; Nürnberger, F.; Lorenz, U. (2019): Development of an intelligent hot-working steel to increase the tool wear resistanceIn: Broeckmann, C. (Hrsg.): Tooling 2019 conference & exhibition. 13.05.-16.05.2019, P64
  • Clausmeyer, T.; Nürnberger, F.; Gutknecht, F.; Isik, K.; Besserer, H.-B.; Gerstein, G.; Wernicke, S.; Schulte, R.; Tekkaya, A.E.; Merklein, M.; Maier, H.J. (2019): Analyse und Modellierung von Schädigung und Versagen in der BlechmassivumformungIn: Merklein, M.; Behrens, B.-A.; Tekkaya, A.E. (Hrsg.): 4. Workshop Blechmassivumformung. Hannover, 12.03.2019. FAU University Press, Erlangen, 2019, S. 33-60
    DOI: 10.25593/978-3-96147-280-2
  • Eftifeeva A., Panchenko E., Chumlyakov Y., Gerstein G., Maier H. J. (2018): The effects of stress-induced martensite ageing on shape memory behavior in Co35Ni35Al30 single crystalsESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018
  • Firstov G., Kosorukova T., Timoshevskii A., Koval Yu., Odnosum V., Matviychuk Yu., Gerstein G., Maier H. J. (2018): Strategies for high entropy shape memory alloy design - from motivation to structure and propertiesESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018
  • Gerstein, G.; Briukhanov, A.; Gutknecht, F.; Volchok, N.; Clausmeyer, T.; Nürnberger, F.; Tekkaya, A. E.; Maier, H. J. (2018): Evaluation of micro-damage by acoustic methodsIn: 17th International Conference on Metal Forming. Metal Forming 2018. Toyohashi, Japan, 16.09. - 19.09.2018, Procedia Manufacturing 15, 2018, S. 527-534
    DOI: 10.1016/j.promfg.2018.07.273
  • Gutknecht, F.; Gerstein, G.; Traphöner, H.; Clausmeyer, T.; Nürnberger, F. (2018): Experimental setup to characterize flow-induced anisotropy of sheet metalsIn: IOP Conf. Series: Materials Science and Engineering 418. International Deep Drawing Research Group 37th Annual Conference. Waterloo, Kanada. 03.06.-07.06.2018, S. 12085
    DOI: 10.1088/1757-899X/418/1/012085
  • Panchenko E., Timofeeva E. E., Chumlyakov Y. I., Osipovich K. S., Larchenkova N. G., Pichkaleva M. V., Tokhmetova A. B., Gerstein G., Maier H. J. (2018): Stress-induced martensite ageing in single crystals of Ni-based Heusler alloy: processing, effect of orientation and functional propertiesESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018
  • Behrens, B.-A.; Hübner, S.; Jalanesh, M.; Sezek, O.; Yarcu, S.; Gümüsoluk T., Spiekemeier, A.; Rodman, D.; Golovko, O.; Gerstein, G.:  (2017): Clinchen für Anwendungen mit zyklisch thermischer und mechanischer BelastungIn: Gemeinsame Forschung in der Mechanischen Fügetechnik. Tagungsunterlagen des 7. Fügetechnischen Gemeinschaftskolloquiums. Dresden. 12-13 Dezember, 2017, S. 91-96
  • Demler, E., Gerstein, G., Dalinger A., Epishin, A., Nürnberger, F., Maier, H. J. (2017): Influence of high-current-density impulses on the plasticity of single crystal nickel-based super alloy CMSX-4In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 47
  • Demler, E.; Gerstein, G.; Dalinger, A.; Nürnberger, F.; Molodov, D. A.; Epishin, A. (2017): Methodical procedure for investigating the influence of electric impulses on the deformation behavior of the single crystal nickel-based alloy CMSX-4 and dynamics of grain boundaries in aluminum bicrystalsIn: Bannykh, O. A. (Hrsg.): VII international conference „Deformation and destruction of materials and nanomaterials“. Moskau. 7.-10.11.2017. IMET RAN, Moskau, 2017, S. 57-58
  • Gerstein, G.; Clausmeyer, T.; Gutknecht, F.; Tekkaya, A. E.; Nürnberger, F. (2017): Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths. In: The Minerals, Metals & Materials Society TMS (Hrsg.): TMS 2017. 146th Annual Meeting & Exhibition Supplemental Proceedings. Springer, Cham, Switzerland, 2017, S. 203-210
    DOI: 10.1007/978-3-319-51493-2_20
  • Gutknecht, F.; Isik, K.; Clausmeyer, T.; Tekkaya, A. E.; Gerstein, G.; Nürnberger, F. (2017): Vorhersage von Schädigung in der BlechmassivumformungIn: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 220
  • Jalanesh, M.; Golovko, O.; Gerstein, G.; Hübsch, C.; Hübner, S.; Yarcu, S.; Sezek, O.; Behrens, B.-A.; Rodman, D.; Maier, H. J. (2017): Properties Of Clinched Stainless Steel Sheets As A Result Of Thermal LoadingIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 47
  • Rodman, D.; Demler, E.; Rodman, M.; Gerstein, G.; Briukhanov, A. A.; Grydin, O.; Klose, C.; Nürnberger, F. (2017): Investigation Of The Sign-Variable Low-Cyclic Bending Deformation Influence On Sheet Properties Of Materials With A Hexagonal Crystal LatticeIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, Seite 47
  • Gerstein, G.; Nürnberger, F.; Maier, H. J. (2016): Evolution of void shape anisotropy in deformed bcc steelsIn: 145. TMS Annual Meeting & Exhebition, Proceedings of the Epd Congress 2016. John Wiley & Sons, Inc., Hoboken, New Jersey, 2016, S. 173-179
  • Gerstein, G.; Besserer, H.-B.; Jablonik, L.; Dalinger, A.; Nürnberger, F.; Höpner, A. (2015): Präparation plastisch umgeformter Stahlproben durch Ionenstrahlbearbeitung für die Untersuchung von duktiler SchädigungIn: Petzow, W. (Hg.): Fortschritte in der Metallographie. Berichte der 49. Metallographie-Tagung Dresden, 16. bis 18. September 2015; S. 153–158
    ISBN: 978-3-88355-410-5
  • Gerstein, G.; Besserer, H.-B.; Nürnberger, F.; Maier, H. J. (2015): Comparsion of the mechanisms of void formation by plastic deformation in single- and dual-phase bcc-steelsProceedings of the TMS 2015 Annual Meeting 2015, Characterization of minerals, metals, and materials, Orlando, Florida, 15.-19.03.2015. Hoboken, New Jersey: John Wiley & Sons, Inc, S. 75–81
    DOI: 10.1002/9781119093404.ch9
    ISBN: 978-1-119-08246-0
  • Kokorin, V.V., Konoplyuk, S.M., Dalinger, A., Thürer, S., Gerstein, G., Mashirov, A., Stetskiv, Y.P., Maier, H.J. (2015): Stress-induced transformation on Ni-Mn-In alloy and the concomitant change of resistivity10th European Symposium on Martensitic Transformations (ESOMAT 2015), Poster presentation, 14. - 17. September 2015, Antwerpen.
  • Zeller, S.; Beese, S.; Gerstein, G.; Isik, K.; Löhnert, S.; Nürnberger, F.; Wriggers, P.; Maier, H. J.; Tekkaya, A. E. (2015): Möglichkeiten der simulativen Vorhersage von Temperaturentwicklung und Bauteilversagen infolge plastischer Deformation bei DP600 BauteilenTekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Hg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, Dortmund, 26. - 27. Februar. Aachen: Shaker Verlag, S. 113–128
  • Clausmeyer, T.; Bargmann, S.; Gershteyn, G.; Schaper, M.; Svendsen, B. (2011): Finite-element Simulation of the Evolution of Plastic AnisotropySteel Research International: ICTP 2011 Special Issue, September 2011
  • Clausmeyer, T.; Gershteyn, G.; Bargmann, S.; Svendsen, B.; Schaper, M.; Khan, A. S. (Hrsg.) (2011): Modeling and characteriziation of the evolution of the dislocation structure during non-monotonic loading. Part 2: Modeling transient behaviorProceedings of 17. International Symposium on Plasticity and its current Applications 2011. Macro to Nano-scale, Inelastic Deformation and Failure of Materials & Multi-scale Modeling. 03.-08.01.2011, Puerto Vallarta, Mexico, S. 172–174.
  • Gershteyn, G.; Clausmeyer, T.; Bargmann, S.; Svendsen, B.; Schaper, M.; Khan, A. S. (Hrsg.) (2011): Modeling and characteriziation of the evolution of the dislocation structure during non-monotonic loading. Part 1: Electron-microscopic analysisProceedings of 17. International Symposium on Plasticity and its current Applications 2011. Macro to Nano-scale, Inelastic Deformation and Failure of Materials & Multi-scale Modeling. 03.-08.01.2011, Puerto Vallarta, Mexico, S. 163-165
  • Gershteyn, G.; Nürnberger, F.; Cianciosi, F.; Shevchenko, N.; Schaper, M.; Bach, Fr.-W. (2011): A Study of Structure Evolution in Pearlitic Steel Wire at Increasing Plastic DeformationSteel research int. 82 (2011) No. 12, p.p. 1368-1374
  • Schaper, M.; Gershteyn, G.; Clausmeyer, T.; Shevchenko, N.; Bargmann, M.; Bach, Fr.-W. (2011): Correlation between morphology of dislocation structures and macroscopic loadingsProc. ICTP 2011, 2011
  • Behrens, B.-A.; Olle, P.; Gershteyn, G.; Voges-Schwieger, K.; (2010): Experimental and Numerical Investigations on Microstructural Evolution during a Hot Stamping ProcessTools and technologies for the processing of ultra high strength steels, S. 81-90. Graz: Verl. der Techn. Univ. Graz, 2010.
    DOI: 10.3217/978-3-85125-108-1-010
    ISBN: 978-3-85125-108-1
  • Gershteyn, G.; Jablonik, L.; Nürnberger, F.; Schaper, M.; Kneissl, A. (Hrsg.) (2010): Einfluss von Umformung und Abkühlung auf die Mikrostruktur des presshärtbaren Stahles 22MnB5Fortschritte in der Metallographie Sonderbände der praktischen Metallographie Vol. 42, S. 69-74. Frankfurt: MAT-INFO Werkstoff-Informationsges., 2010.
    ISBN: 9783883553825
  • Schaper, M.; Gershteyn, G.; Grydin, O.; Fassmann, D.; Yu, Z.; Nürnberger, F. (2010): Modellierung des Werkstoffverhaltens beim Warmumformen höchstfester Stähle auf der Basis mikrostruktureller VorgängeMerklein (Hg.) – Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 5. Erlanger Workshop Warmblechumformung, S. 141-160. Bamberg: Meisenbach GmbH-Verlag, 2010.
    ISBN: 978-3-87525-311-5
  • Jendras, M.; Bach, Fr.-W.; Springer, R.; Gershteyn, G.; Hübsch, C.; Bührig-Polaczek, A. (Hrsg.) (2009): Beobachtung der hydrothermalen Alterung von ZrO2 Keramiken mittels mikroskopischer und röntgenographischer VerfahrenFortschritte in der Metallographie: [Vortragstexte der 43. Metallographie-Tagung, 16. - 18. September 2009 in Aachen] Sonderbände der praktischen Metallographie Vol. 41, S. 219-225. Frankfurt: Werkstoff-Informationsges., 2009.
    ISBN: 978-3-88355-376-4
  • Krause, C.; Springer, R.; Biasutti, F.; Gershteyn, G.; Bach, Fr.-W.; {Arbeitsgemeinschaft Wärmebeh(Hrsg.) ;lung und Werkstofftechnik e.V.} (Hrsg.) (2009): Mikrostrukturelle Untersuchungen an randschichhärtbarem Stahl Cf53 nach SDPR - Hochhochgeschwindigkeits-Austenitisieren mit anschließendem AbschreckenWerkstofftechnik, Fertigungs- und Verfahrenstechnik. 65. Kolloquium für Wärmebehandlung. Rhein-Main-Hallen Wiesbaden, 2009.
  • Springer, R.; Gershteyn, G.; Hoffmann, S.; Bach, Fr.-W.; Bleck, W.; Bührig-Polaczek, A. (Hrsg.) (2009): Untersuchung des Deformationsreliefs an Oberflächen metallischer Werkstoffe mittels konfokaler Mikroskopie zur Beschreibung des FließverhaltensFortschritte in der Metallographie: [Vortragstexte der 43. Metallographie-Tagung, 16. - 18. September 2009 in Aachen] Sonderbände der praktischen Metallographie Vol. 41, S. 145-149. Frankfurt: Werkstoff-Informationsges., 2009.
    ISBN: 978-3-88355-376-4
  • Springer, R.; Gershteyn, G.; Schaper, M.; Merklein, M. (Hrsg.) ; Lechler, J. (Hrsg.) (2009): Transmissionselektronenmikroskopische Bestimmung der Phasenanteile von pressgehärtetem Vergütungsstahl 22MnB5 zur Verwendung in der numerischen ProzessanalyseTagungsband zum 4. Erlanger Workshop Warmblechumformung. 11. November 2009, S. 33-44. Bamberg: Meisenbach, 2009.
    ISBN: 9783875252989
  • Springer, R.; Gerstheyn, G.; Schaper, M. (2009): Mikrostrukturelle Untersuchungen an randschichhärtbarem Stahl Cf53 nach SDPR – Hochhochgeschwindigkeits-Austenitisieren mit anschließendem Abschrecken M. Merklein und J. Lechler (Hg.): Tagungsband zum 4. Erlanger Workshop Warmblechumformung. 11. November 2009. DFG ortsverteilte Forschungsgruppe 552 Erlangen 11. November 2009. Bamberg: Meisenbach, S. 33–44
  • Psyk, V.; Gershteyn, G.; Demir, O. K.; Brosius, A.; Tekkaya, A. E.; Schaper, M.; Bach, Fr.-W.; Kleiner, M. (Hrsg.) (2008): Process Analysis and Physical Simulation of Electromagnetic Joining of Thin-walled PartsProceedings of the 3rd International Conference on High Speed Forming. March 11 - 12, 2008, Dortmund, Germany. Unter Mitarbeit von M. Kleiner und A. E. Tekkaya. Proceedings of 3rd International Conference on High Speed Forming; Institut für Umformtechnik und Leichtbau. Dortmund: IUL, S. 181–190
    ISBN: 3-9809535-3-X
  • Risch, D.; Gershteyn, G.; Dudzinski, W.; Beerwald, C.; Brosius, A.; Schaper, M.; Tekkaya, A. E.; Bach, Fr.-W.; Kleiner, M. (Hrsg.) (2008): Design and Analysis of a Deep Drawing and Inprocess Electromagnetic Sheet Metal Forming ProcessProceedings of the 3rd International Conference on High Speed Forming. March 11 - 12, 2008, Dortmund, Germany. Unter Mitarbeit von M. Kleiner und A. E. Tekkaya. Proceedings of 3rd International Conference on High Speed Forming; Institut für Umformtechnik und Leichtbau. Dortmund: IUL, S. 201–212
    ISBN: 3-9809535-3-X
  • Bach, Fr.-W.; Schaper, M.; Bosse, M.; Gershteyn, G.; Nowak, M. (2005): Casting of Magnesium alloys with magnetic propertiesFirst International Conference and Exhibition Magnesium - Broad Horizons, S. 16-19. Moscow, Russia, 2005.

Zeitschriften/Aufsätze

  • Behrens, B.-A.; Hübner, S.; Müller, P.; Besserer, H.-B.; Gerstein, G.; Koch, S.; Rosenbusch, D. (2020): New Multistage Sheet-Bulk Metal Forming Process Using Oscillating ToolsMetals 10, 2020 (5), 617
    DOI: 10.3390/met10050617
  • Hinte, C.; Barienti, K.; Steinbrücker, J.; Gerstein, G.; Swider, M. A.; Herbst, S.; Eggeler, G.; Maier, H. J. (2020): Pattern-forming nanoprecipitates in NiTi-related high entropy shape memory alloysScripta Materialia 186, 2020, 132-135
    DOI: 10.1016/j.scriptamat.2020.05.007
  • Hinte, C.; Barienti, K.; Steinbrücker, J.; Hartmann, J.-M.; Gerstein, G.; Herbst, S.; Piorunek, D.; Frenzel, J.; Fantin, A.; Maier, H. J. (2020): The Effect of Increasing Chemical Complexity on the Mechanical and Functional Behavior of NiTi-Related Shape Memory AlloysShap. Mem. Superelasticity 122, 2020, 106792
    DOI: 10.1007/s40830-020-00284-0
  • Konoplyuk, S. M.; Kokorin, V. V.; Kolomiets, A. V.; Paukov, M.; Kastil, J.; Gerstein, G.; Maier, H. J. (2020): Order and Temperatures of Magnetic Transitions in a Ni₅₁.₉Mn₂₇.₀Ga₂₁.₁ AlloyIEEE Trans. Magn. 56, 2020 (7), 1-5
    DOI: 10.1109/TMAG.2020.2991317
  • L'vov, V. A.; Kosogor, A.; Palamarchuk, S. I.; Gerstein, G.; Maier, H. J. (2020): Influence of incorporated nanoparticles on superelastic behavior of shape memory alloysMaterials Science and Engineering: A 776, 2020, 139025
    DOI: 10.1016/j.msea.2020.139025
  • Samothrakitis, S.; Larsen, C. B.; Woracek, R.; Heller, L.; Kopeček, J.; Gerstein, G.; Maier, H. J.; Rameš, M.; Tovar, M.; Šittner, P.; Schmidt, S.; Strobl, M. (2020): A multiscale study of hot-extruded CoNiGa ferromagnetic shape-memory alloysMaterials & Design 196, 2020, 109118
    DOI: 10.1016/j.matdes.2020.109118
  • Schulz, A.; Cui, C.; Steinbacher, M.; Ümit, T.; Wunde, M.; Jung, I.; Acar, S.; Nürnberger, F.; Gerstein, G.; Herbst, S.; Maier, H. J. (2020): Effects of Cryogenic Treatment on the Microstructure and Mechanical Properties of High-alloyed Tool SteelsHTM 75, 2020 (5), 287-307
    DOI: 10.3139/105.110422
  • Wernicke, S.; Hahn, M.; Gerstein, G.; Nürnberger, F.; Tekkaya, A. E. (2020): Strain path dependency in incremental sheet-bulk metal formingInt J Mater Form 90, 2020 (7), 3585
    DOI: 10.1007/s12289-020-01537-0
  • Acar, S.; Gerstein, G.; Cui, C.; Schulz, A.; Nürnberger, F. (2019): Preparation Methods for Scanning Electron Microscope Characterization of Nano-Carbides in Cold Work Steel X153CrMoV12Pract. Metallogr. 56, 2019 (5), 303-316
    DOI: 10.3139/147.110555
  • Eftifeeva, A.; Panchenko, E.; Chumlyakov, Y.; Yanushonite, E.; Gerstein, G.; Maier, H. J. (2019): Compressive response of high-strength [001]-oriented single crystals of a Co35Ni35Al30 shape memory alloyJournal of Alloys and Compounds 787, 2019, 963-971
    DOI: 10.1016/j.jallcom.2019.02.185
  • Gerstein, G.; Körkemeyer, F.; Dalinger, A.; Zaefferer, S.; Maier, H. J. (2019): Anomalous twinning in AZ 31 magnesium alloy during electrically assisted formingMaterials Letters 255, 2019, 126516
    DOI: 10.1016/j.matlet.2019.126516
  • Karsten, E.; Gerstein, G.; Golovko, O.; Dalinger, A.; Lauhoff, C.; Krooss, P.; Niendorf, T.; Samsonenko, A.; Maier, H. J. (2019): Tailoring the Microstructure in Polycrystalline Co–Ni–Ga High-Temperature Shape Memory Alloys by Hot ExtrusionShap. Mem. Superelasticity 5, 2019 (1), 84-94
    DOI: 10.1007/s40830-019-00208-7
  • Kosorukova, T. A.; Gerstein, G.; Odnosum, V. V.; Koval, Y. N.; Maier, H. J.; Firstov, G. S. (2019): Microstructure Formation in Cast TiZrHfCoNiCu and CoNiCuAlGaIn High Entropy Shape Memory Alloys: A ComparisonMaterials 12, 2019 (24)
    DOI: 10.3390/ma12244227
  • Niendorf, T.; Lauhoff, C.; Karsten, E.; Gerstein, G.; Liehr, A.; Krooß, P.; Maier, H. J. (2019): Direct microstructure design by hot extrusion – High-temperature shape memory alloys with bamboo-like microstructureScripta Materialia 162, 2019, 127-131
    DOI: 10.1016/j.scriptamat.2018.10.051
  • Panchenko, E. Y.; Timofeeva, E. E.; Chumlyakov, Y. I.; Osipovich, K. S.; Tagiltsev, A. I.; Gerstein, G.; Maier, H. J. (2019): Compressive shape memory actuation response of stress-induced martensite aged Ni51Fe18Ga27Co4 single crystalsMaterials Science and Engineering: A 746, 2019, 448-455
    DOI: 10.1016/j.msea.2019.01.004
  • Panchenko, E.; Timofeeva, E.; Eftifeeva, A.; Osipovich, K.; Surikov, N.; Chumlyakov, Y.; Gerstein, G.; Maier, H. J. (2019): Giant rubber-like behavior induced by martensite aging in Ni51Fe18Ga27Co4 single crystalsScripta Materialia 162, 2019, 387-390
    DOI: 10.1016/j.scriptamat.2018.12.003
  • Reschka, S.; Gerstein, G.; Dalinger, A.; Herbst, S.; Nürnberger, F.; Zaefferer, S. (2019): Visualization and Observation of Morphological Peculiarities of Twin Formation in Mg-Based Samples After Electrically Assisted FormingMetallogr. Microstruct. Anal. 8, 2019 (6), 806-814
    DOI: 10.1007/s13632-019-00589-2
  • Reschka, S.; Gerstein, G.; Herbst, S.; Munk, L.; Wriggers, P.; Maier, H.J. (2019): 3D orientation data - A comparison of diffraction contrast tomography and serial sectioning electron backscatter diffraction for the nickel-base superalloy IN738LCMaterials Letters, 2019, 127177
    DOI: 10.1016/j.matlet.2019.127177
  • Zeller, S.; Baldrich, M.; Gerstein, G.; Nuernberger, F.; Loehnert, S.; Maier, H. J.; Wriggers, P. (2019): Material models for the thermoplastic material behaviour of a dual-phase steel on a microscopic and a macroscopic length scaleJournal of the Mechanics and Physics of Solids 129, 2019, 205-228
    DOI: 10.1016/j.jmps.2019.04.012
  • Bal, B.; Koyama, M.; Canadinc, D.; Gerstein, G.; Maier, H. J.; Tsuzaki, K. (2018): On the Utility of Crystal Plasticity Modeling to Uncover the Individual Roles of Microdeformation Mechanisms on the Work Hardening Response of Fe-23Mn-0.5C TWIP Steel in the Presence of HydrogenJ. Eng. Mater. Technol 140, 2018 (3), 31002
    DOI: 10.1115/1.4038801
  • Demler, E.; Gerstein, G.; Dalinger, A.; Epishin, A.; Heidenblut, T.; Nürnberger, F.; Maier, H. J. (2018): Influence of High Current-Density Impulses on the Stress-Strain Response and Microstructural Evolution of the Single Crystal Superalloy CMSX-4Materials Research 21, 2018 (6), 1063
    DOI: 10.1590/1980-5373-MR-2018-0428
  • Demler, E.; Gerstein, G.; Dalinger, A.; Nürnberger, F.; Epishin, A.; Molodov, D. A. (2018): Effect of Electrical Pulses on the Mechanical Behavior of Single Crystals of Nickel-Based CMSX-4 Superalloy and the Mobility of Low-Angle Grain Boundary in Aluminum BicrystalsBulletin of the Russian Academy of Sciences: Physics 82, 2018 (9), 1079-1085
    DOI: 10.3103/S106287381809006X
  • Demler, E.; Rodman, D.; Rodman, M.; Gerstein, G.; Grydin, O.; Briukhanov, A. A.; Klose, C.; Nürnberger, F.; Maier, H. J. (2018): The Influence of Alternating Low-Cycle Bending Loads on Sheet Properties Having an Hcp Crystal LatticeJ. of Materi Eng and Perform 27, 2018 (2), 541-549
    DOI: 10.1007/s11665-018-3123-2
  • Epishin, A.; Petrushin, N.; Nolze, G.; Gerstein, G.; Maier, H. J. (2018): Investigation of the γ′-Strengthened Quaternary Co-Based Alloys Co-Al-W-TaMetall and Mat Trans A 49, 2018 (9), 4042-4057
    DOI: 10.1007/s11661-018-4756-3
  • Gerstein, G.; Firstov, G. S.; Kosorukova, T. A.; Koval, Y. N.; Maier, H. J. (2018): Development of B2 Shape Memory Intermetallics Beyond NiAl, CoNiAl and CoNiGaShap. Mem. Superelasticity 4, 2018 (3), 360-368
    DOI: 10.1007/s40830-018-0180-1
  • Gerstein, G.; Firstov, G.; Chumlyakov, Y.; Krooß, P.; Niendorf, T.; Dalinger, A.; Maier, H. J. (2018): Magnetic pulse controlled microstructure development in Co 49 Ni 21 Ga 30 single crystalsMaterials Science and Technology 34, 2018 (16), 1954-1964
    DOI: 10.1080/02670836.2018.1497129
  • Gerstein, G.; L'vov, V. A.; Kosogor, A.; Maier, H. J. (2018): Internal pressure as a key thermodynamic factor to obtain high-temperature superelasticity of shape memory alloysMaterials Letters 210, 2018, 252-254
    DOI: 10.1016/j.matlet.2017.09.034
  • Gerstein, G.; L'vov, V. A.; Żak, A.; Dudziński, W.; Maier, H. J. (2018): Direct Observation of Nano-dimensional Internal Structure of Ferromagnetic Domains in the Ferromagnetic Shape Memory Alloy Co-Ni-GaJournal of Magnetism and Magnetic Materials, 2018
    DOI: 10.1016/j.jmmm.2018.06.066
  • Mohammadi, A.; Koyama, M.; Gerstein, G.; Maier, H. J.; Noguchi, H. (2018): Hydrogen-assisted failure in a bimodal twinning-induced plasticity steel: Delamination events and damage evolutionInternational Journal of Hydrogen Energy 43, 2018 (4), 2492-2502
    DOI: 10.1016/j.ijhydene.2017.11.177
  • Niendorf, T.; Lauhoff, C.; Karsten, E.; Gerstein, G.; Liehr, A.; Krooß, P.; Maier, H. J. (2018): Direct microstructure design by hot extrusion – High-temperature shape memory alloys with bamboo-like microstructureScripta Materialia 162, 2019, 127-131
    DOI: 10.1016/j.scriptamat.2018.10.051
  • Panchenko, E.; Eftifeeva, A.; Chumlyakov, Y.; Gerstein, G.; Maier, H. J. (2018): Two-way shape memory effect and thermal cycling stability in Co 35 Ni 35 Al 30 single crystals by low-temperature martensite ageingScripta Materialia 150, 2018, 18-21
    DOI: 10.1016/j.scriptamat.2018.02.013
  • Panchenko, E.; Timofeeva, E.; Eftifeeva, A.; Osipovich, K.; Surikov, N.; Chumlyakov, Y.; Gerstein, G.; Maier, H. J. (2018): Giant rubber-like behavior induced by martensite aging in Ni51Fe18Ga27Co4 single crystalsScripta Materialia 162, 2019, 387-390
    DOI: 10.1016/j.scriptamat.2018.12.003
  • Toker, S. M.; Gerstein, G.; Maier, H. J.; Canadinc, D. (2018): Effects of microstructural mechanisms on the localized oxidation behavior of NiTi shape memory alloys in simulated body fluidJ Mater Sci 53, 2018 (2), 948-958
    DOI: 10.1007/s10853-017-1586-4
  • Żak, A.; Łaszcz, A.; Hasiak, M.; Gerstein, G.; Maier, H. J.; Dudzinski, W. (2018): Ion polishing as a method of imaging the magnetic structures in CoNiGa monocrystalResults in Physics 10, 2018, 277-280
    DOI: 10.1016/j.rinp.2018.06.020
  • Demler, E.; Gerstein, G.; Dalinger, A.; Epishin, A.; Rodman, D.; Nürnberger, F. (2017): Influence of High-Current-Density Impulses on the Compression Behavior: Experiments with Iron and a Nickel-Based AlloyJournal of Materials Engineering and Performance 26, 2017 (1), 177-184
    DOI: 10.1007/s11665-016-2457-x
  • Gerstein, G.; Besserer, H.-B.; Nürnberger, F.; Barrales-Mora, L. A.; Shvindlerman, L. S.; Estrin, Y.; Maier, H. J. (2017): Formation and growth of voids in dual-phase steel at microscale and nanoscale levelsJournal of Materials Science 52, 2017 (8), 4234-4243
    DOI: 10.1007/s10853-016-0678-x
  • Gerstein, G.; Clausmeyer, T.; Isik, K.; Nürnberger, F.; Tekkaya, A. E.; Bruchanov, A. A.; Maier, H.J. (2017): Experimental analysis of anisotropic damage in dual-phase steel by resonance measurementInternational Journal of Damage Mechanics 26, 2016 (8), 1147-1169
    DOI: 10.1177/1056789516650245
  • Gerstein, G.; Isik, K.; Gutknecht, F.; Sieczkarek, P.; Ewert, J.; Tekkaya, A. E.; Clausmeyer, T.; Nürnberger, F. (2017): Microstructural characterization and simulation of damage for geared sheet componentsJ. Phys.: Conf. Ser. 896, 2017, 12076
    DOI: 10.1088/1742-6596/896/1/012076
  • Gerstein, G.; L’vov, V.; Chumlyakov, Y.; Niendorf, T.; Krooß, P.; Dalinger, A.; Heidenblut, T.; Maier, H. J. (2017): Pulsed magnetic field-induced changes in the meso- and nanostructure of Co49Ni21Ga30 martensiteFunct. Mater. Lett. 10, 2017 (04), 1750044
    DOI: 10.1142/S1793604717500448
  • Nürnberger, F.; Gerstein, G.; Dalinger, A.; Thürer, S. E.; Vinogradov, A.; Feldhoff, A.; Maier, H. J. (2017): Surface modification of an austenitic stainless steel wire by a multi-pulse treatment with a high-power electric currentJournal of Materials Science 52, 2017 (13), 8007-8015
    DOI: 10.1007/s10853-017-1003-z
  • Panchenko, E.; Timofeeva, E. E.; Larchenkova, N. G.; Chumlyakov, Y.; Tagiltsev, A. I.; Maier, H. J.; Gerstein, G. (2017): Two-way shape memory effect under multi-cycles in [001]-oriented Ni 49 Fe 18 Ga 27 Co 6 single crystal Materials Science and Engineering: A 706, 2017, 95-103
    DOI: 10.1016/j.msea.2017.08.108
  • Timofeeva, E. E.; Panchenko, E. Y.; Chumlyakov, Y. I.; Maier, H. J.; Gerstein, G. (2017): Peculiarities of high-temperature superelasticity in Ni–Fe–Ga single crystals in compressionTech. Phys. Lett. 43, 2017 (3), 320-323
    DOI: 10.1134/S1063785017030245
  • Bal, B.; Koyama, M.; Gerstein, G.; Maier, H. J.; Tsuzaki, K. (2016): Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gasInternational Journal of Hydrogen Energy 41, 2016 (34), 15362-15372
    DOI: 10.1016/j.ijhydene.2016.06.259
  • Besserer, H.-B.; Gerstein, G.; Maier, H. J.; Nürnberger, F. (2016): Specimen Preparation by Ion Beam Slope Cutting for Characterization of Ductile Damage by Scanning Electron MicroscopyMicrosc. Res. Tech. 79, 2016 (4), 321-327
    DOI: 10.1002/jemt.22633
  • Besserer, H.-B.; Hildenbrand, P.; Gerstein, G.; Rodman, D.; Nürnberger, F.; Merklein, M.; Maier, H. J. (2016): Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming ProcessesJournal of Materials Engineering and Performance 25, 2016 (3), 1136-1142
    DOI: 10.1007/s11665-016-1908-8
  • Bryukhanov, A. A.; Gerstein, G.; Dyachok, D. A.; Nürnberger, F. (2016): Effect of Deformation Texture on the Anisotropy of Elasticity and Damage of Two Phase Steel SheetsThe Physics of Metals and Metallography 117, 2016 (7), 719-724
    DOI: 10.1134/S0031918X16050033
  • Epishin, A. I.; Petrushin, N. V.; Link, T.; Nolze, G.; Loshchinin, Y. V.; Gerstein, G. (2016): Thermal Stability of the Structure of a Heat-Resistant Cobalt Alloy Hardened with Intermetallic γ'-Phase PrecipitatesRussian Metallurgy, 2016 (4), 286-291
  • Gerstein, G.; Bruchanov, A. A.; Dyachok, D. V.; Nürnberger, F. (2016): The effect of texture in modeling deformation processes of bcc steel sheetsMaterials Letters 164, 2016, 356-359
    DOI: 10.1016/j.matlet.2015.11.007
  • Gerstein, G.; Clausmeyer, T.; Isik, K.; Nürnberger, F.; Tekkaya, A. E.; Bruchanov, A. A.; Maier, H. J. (2016): Experimental analysis of anisotropic damage in dual-phase steel by resonance measurementInternational Journal of Damage Mechanics, 2016
    DOI: 10.1177/1056789516650245
  • Isik, K.; Gerstein, G.; Clausmeyer, T.; Nürnberger, F.; Tekkaya, A. E.; Maier, H. J. (2016): Evaluation of Void Nucleation and Development during Plastic Deformation of Dual-Phase Steel DP600Steel Research Int. 87, 2016 (12), 1583-1591
    DOI: 10.1002/srin.201500483
  • Isik, K.; Gerstein, G.; Gutknecht, F.; Clausmeyer, T.; Nürnberger, F.; Maier, H. J.; Tekkaya, A. E. (2016): Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punchingProcedia Structural Integrity 2, 2016, 673-680
    DOI: 10.1016/j.prostr.2016.06.087
  • Isik, K.; Gerstein, G.; Schneider, T.; Schulte, R.; Rosenbusch, D.; Clausmeyer, T.; Nürnberger, F.; Vucetic, M.; Koch, S.; Hübner, S.; Behrens, B.-A.; Tekkaya, A. E.; Merklein, M. (2016): Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal formingProduction Engineering 10, 2016 (1), 5-15
    DOI: 10.1007/s11740-016-0656-9
  • Milenin, A.; Kustra, P.; Byrska-Wójcik, D.; Grydin, O.; Schaper, M.; Mentlein, T.; Gerstein, G.; Nürnberger, F. (2016): Analysis of Microstructure and Damage Evolution in Ultra-Thin Wires of the Magnesium Alloy MgCa0.8 at Multipass DrawingJOM 68, 2016 (12), 3063-3069
    DOI: 10.1007/s11837-016-2127-3
  • Onal, O.; Gumus, B.; Aksoy, B.; Gerstein, G.; Alaca, B. E.; Maier, H. J.; Canadinc, D. (2016): Micro-Scale Cyclic Bending Response of NiTi Shape Memory AlloyMaterials Transactions 57, 2016 (3), 472-475
    DOI: 10.2320/matertrans.M2015423
  • Uzer, B.; Toker, S. M.; Cingoz, A.; Bagci-Onder, T.; Gerstein, G.; Maier, H. J.; Canadinc, D. (2016): An exploration of plastic deformation dependence of cell viability and adhesion in metallic implant materialsJournal of the Mechanical Behavior of Biomedical Materials 60, 2016, 177-186
    DOI: 10.1016/j.jmbbm.2016.01.001
  • Bal, B.; Gumus, B.; Gerstein, G.; Canadinc, D.; Maier, H.J. (2015): On the micro-deformation mechanisms active in high-manganese austenitic steels under impact loadingMaterials Science and Engineering: A, 632; 29-34
    DOI: 10.1016/j.msea.2015.02.054
  • Gerstein, G.; Klusemann, B.; Bargmann, S.; Schaper, M. (2015): Characterization of the Microstructure Evolution in IF-Steel and AA6016 during Plane-Strain Tension and Simple ShearMaterials 8; 285-301
    DOI: 10.3390/ma8010285
  • Grygier, D.; Dudziński, W.; Gerstein, G.; Nürnberger, F. (2015): The effectiveness of spheroidization pearlitic steel with regard to the degree of plastic deformationInterdisciplinary Journal of Engineering Sciences, 3, 2015 (1); 6-9
  • Gumus, B.; Bal, B.; Gerstein, G.; Canadinc, D.; Maier, H. J.; Guner, F.; Elmadagli, M. (2015): Twinning activities in high-Mn austenitic steels under high-velocity compressive loadingMaterials Science and Engineering: A 648; 104-112.
    DOI: dx.doi.org/10.1016/j.msea.2015.09.045
  • Kokorin, V. V.; Konoplyuk, S. M.; Dalinger, A.; Thürer, S.; Gerstein, G.; Maier, H. J. (2015): Stress-induced resistivity changes in a Ni-Mn-In alloyApplied Physics Letters, 2015, 106; 131908.
    DOI: 10.1063/1.4917016
  • Panchenko, E. Yu; Chumlyakov, Yu I.; Surikov, N. Yu; Maier, H. J.; Gerstein, G.; Sehitoglu, H. (2015): Superelasticity in high-strength heterophase single crystals of Ni51.0Ti36.5Hf12.5 alloyTechnical Physics Letters 41 (8), 2015; 797-800.
    DOI: 10.1134/S1063785015080283
  • Petrushin, N.; Hvatzkiy, K.; Gerasimov, V.; Link, T.; Epishin, A.; Nolze, G.; Gerstein, G. (2015): A Single-Crystal Co-Base Superalloy Strengthened by γ′ Precipitates: Structure and Mechanical PropertiesAdvanced Engineering Materials 17 (6) 2015, 755-760
    DOI: 10.1002/adem.201500088
  • Gerstein, G.; Nürnberger, F.; Dudzinski, W.; Grygier, D.; Schaper, M.; Milenin, A. (2014): Structural Evolution of Thin Lamellar Cementite during Cold Drawing of Eutectoid SteelsProcedia Engineering 2014 (81), S. 694–699
    DOI: 10.1016/j.proeng.2014.10.062
  • Herbst, S.; Gerstein, G.; Nürnberger, F.; Bach, F.-W. (2014): Suitable Impact Parameters for High-Speed Joining and Influence on the Bonding Zone MicrostructureJournal of Materials Engineering and Performance 23 (3), S. 944-953
    DOI: 10.1007/s11665-013-0845-z
  • Rodman, M.; Bryukhanov, A.A.; Bach, Fr.-W.; Grydin, O.; Klose, C.; Gerstein, G. (2014): Complex Investigations of the Influence of Low Cycle Sign-Variable Bending on the Mechanical Properties of Magnesium Alloy AZ31 Sheet Plastic Deformation of Metals 1, S. 23-27
  • Toker, S. M; Canadinc, D.; Taube, A.; Gerstein, G.; Maier, H. J. (2014): On the Role of Slip - Twin Interactions on the Impact Behavior of High-Manganese Austenitic SteelsMater. Sci. Eng. A., vol. 593, 120–126.
  • Clausmeyer, T.; Gerstein, G.; Bargmann, S.; Svendsen, B.; van den Boogaard, A. H.; Zillmann, B. (2013): Experimental characterization of microstructure development during loading path changes in bcc sheet steelsIn: Journal of Materials Science 48 (2), S. 674–689
  • Grydin, O.; Gerstein, G.; Nürnberger, F.; Schaper, M.; Danchenko, V. (2013): Twin-roll casting of aluminum–steel clad stripsIn: Journal of Manufacturing Processes 15 (4), S. 501–507.
  • Herbst, S.; Jablonik, L.; Gerstein, G.; Nürnberger, F.; Bach, Fr.-W. (2013): Topographieoptimierende Präparation metallischer WerkstoffverbundeIn: Praktische Metallographie / Practical Metallography 50 (7), S. 491–500. Online verfügbar unter http://www.practical-metallography.com/PM110242.
  • Faßmann, D.; Gerstein, G.; Gerstein, D.; Nürnberger, F.; Schaper, M.; Bach, Fr.-W. (2012): Preparation Routine for In Situ Strain Analysis of deep drawing Steel DC04 by Means of Transmission Electron MicroscopyIn: Praktische Metallographie 2012 (9), S. 577–587
  • Faßmann, D.; Gerstein, G.; Schaper, M.; Bach, Fr.-W. (2012): Investigation of ductile damage development in ferritic steel subject to uniaxial deformationIn: Fatigue & Fracture of Engineering Materials & Structures 35 (10), S. 936–942. Online verfügbar unter http://onlinelibrary.wiley.com/doi/10.1111/j.1460-2695.2012.01679.x/full.
  • Gershteyn, G.; Shevchenko, N.; Diekamp, M.; Brosius, A.; Schaper, M.; Bach, Fr.-W. (2012): Features of austenitic steels’ microstructure following plastic deformationMaterialwissenschaft und Werkstofftechnik, 43, (2012), No. 3
  • Gerstein, G.; Nowak, M.; Bierbaum, M.; Zhuravina, T.; Schaper, M.; Bach, Fr.-W. (2012): Increase the deformability of NiCo single crystals using of electrical pulse-like currentsKey Engineering Materials, 504-506, 143
    DOI: 10.4028/www.scientific.net/KEM.504-506.143
  • Nürnberger, F.; Stolbchenko, M.; Grydin, O.; Gerstein, G.; Faßmann, D.; Schaper, M. (2012): Numerical investigation of in situ TEM tensile testsIn: Metallurgical and mining industry 4 (4), S. 37–44
  • Clausmeyer, T.; van den Boogaard, A. H.; Noman, M.; Gershteyn, G.; Schaper, M.; Svendsen, B. (2011): Phenomenological modeling of anisotropy induced by evolution of the dislocation structure on the macroscopic and microscopic scaleInternational Journal of Material Forming, 2011.
    DOI: 10.1007/s12289-010-1017-4
  • Faßmann, D.; Gershteyn, G.; Schaper, M.; Bach, Fr.-W. (2011): Präparations- und Analysestrategie zur Untersuchung verformungsinduzierter Poren in kaltverfomtem StahlPraktische Metallographie Vol. 48, Nr. 5, S. 232-238, 2011.
  • Psyk, V.; Gershteyn, G.; Barlage, B.; Weddeling, C.; Albuja, B.; Brosius, A.; Tekkaya, A. E.; Bach, Fr.-W. (2011): Process Design for the Manufacturing of Magnetic Pulse Welded JointsKey Engineering Materials Vol. 473, S. 243-250, 2011.
    DOI: 10.4028/www.scientific.net/KEM.473.243
  • Gershteyn, G.; Golosova, T.; Schaper, M.; Gerstein, D.; Lychagin, D.; Bach, Fr.-W. (2010): The Possible Mechanism of Slip Band FormationSistemnye Technologii Vol. 70, Nr. 5, S. 162-166, 2010.
  • Gershteyn, G.; Nowak, M.; Schaper, M.; Bach, Fr.-W. (2010): Untersuchung der mikrostrukturellen Werkstoffcharakteristik des Stahls DC06 bei der plastischen Umformung: Analysis on the micro structural material characteristic of the DC06 steel by the plastic deformationMaterialwissenschaft und Werkstofftechnik Vol. 41, Nr. 10, S. 844-852, 2010.
  • Krause, C.; Springer, R.; Biasutti, F.; Gershteyn, G.; Bach, Fr.-W. (2010): Mikrostrukturelle Untersuchungen an randschichhärtbarem Stahl Cf53 nach einer induktiven Hochgeschwindigkeitsaustenitisierung mit anschließendem AbschreckenJournal of Heat Treatment and Materials Vol. 65, Nr. 2, S. 96-101, 2010.
  • Gretzki, T.; Gershteyn, G. (2009): In situ Mikrostruktur während des Anlassens von 42CrMo4 im Transmissionselektronenmikroskop: Jahresbericht Produktionstechnisches Zentrum Hannover 2008, S. 77, 2009.
  • Krause, C.; Springer, R.; Gershteyn, G.; Dudzinski, W.; Bach, Fr.-W. (2009): In-situ high temperature microstructural analysis during tempering of 42CrMo4 using transmission electron microscopyInternational Journal of Materials Research Vol. 2009, Nr. 7, S. 991-1000, 2009.
  • Shevchenko, N. V.; Gershteyn, G.; Schaper, M.; Bach, Fr.-W. (2009): Structure investigation of austenitic steel after cold rolling deformationSucasni problemy metalurhii Vol. 12, S. 107-113, 2009.
  • Teplyakova, L.; Gershteyn, G.; Popova, E.; Kozlov, L.; Ignatenko, R.; Springer, R.; Schaper, M.; Bach, Fr.-W. (2009): Scale-dependent hierarchy of structural elements in the microstructure of thermomechanical treated ferritic steels with residual austeniteMaterialwissenschaft und Werkstofftechnik Vol. 40, Nr. 9, S. 704-712, 2009.
  • Kleiner, M.; Hermes, M.; Weber, M.; Olivier, H.; Gershteyn, G.; Bach, Fr.-W.; Brosius, A. (2007): Tube expansion by gas detonationProd. Eng. Res. Devel. Vol. 2007, Nr. 1, S. 9-17, 2007.