Dr. Oleksandr Golovko


Dr. Oleksandr Golovko
Telefon
Fax
E-Mail
Adresse
An der Universität 2
30823 Garbsen
30823 Garbsen
Gebäude
Raum


Dr. Oleksandr Golovko
PUBLIKATIONEN
Zeitschriften/Aufsätze
-
(2021): Hot forming of shape memory alloys in steel shells, Prod. Eng. Res. Devel. 481–482, 2021 (3), 266
DOI: 10.1007/s11740-021-01024-8 -
(2019): Tailoring the Microstructure in Polycrystalline Co–Ni–Ga High-Temperature Shape Memory Alloys by Hot Extrusion, Shap. Mem. Superelasticity 5, 2019 (1), 84-94
DOI: 10.1007/s40830-019-00208-7 -
(2017): Mechanical Properties of Co-Extruded Aluminium-Steel Compounds, Key Engineering Materials 742, 2017, 512-519
DOI: 10.4028/www.scientific.net/KEM.742.512 -
(2016): Umformtechnische Herstellung hybrider Lagerbuchsen, wt Werkstattstechnik online 106, 2016 (10), 743-748
-
(2015): Testing of pipe sections, Materials Testing 57, 2015 (7-8); 643-648.
DOI: 10.3139/120.110759 -
(2015): Extrusion of the bimetallic aluminum-magnesium rods and tubes, Forsch Ingenieurwes 79, 2015 (1-2); 17–27
DOI: 10.1007/s10010-015-0184-3 -
(2014): Spray cooling of extruded EN AW-6082 aluminium alloy sheets: spatial heat transfer coefficients, Forsch Ingenieurwes 78 (1-2), S. 1-7
DOI: 10.1007/s10010-014-0181-y -
(2013): Water-Air Spray Cooling of Extruded Profiles: Process Integrated Heat Treatment of the Alloy EN AW-6082, Journal of Materials Engineering and Performance 22, 2013 (9), 2580-2587
-
(2012): Analiz parametrov vodo-vozdušnogo sprejernogo ohlaždeniâ metalla v integrirovannyh tehnologičeskih processah, Metallurgičeskaja i gornorudnaja promyšlennost' 7, 2012, 208-212
-
(2012): Analiz izmeneniya temperatury metalla pri osevom vodovozdushnom spreyernom okhlazhdenii stalnykh tsilindricheskikh obraztsov, Metallurgičeskaja i gornorudnaja promyšlennost' 6, 2012, 33-39
-
(2012): Investigation of the Water-Air Cooling Process of the Thick-Walled Extruded Profile Made of Alloy AW-6060 on the Output Table, Metallurgical and mining industry 4 (2), S. 66–74
-
(2012): Issledovanie processa vodo-vozdušnogo ohlaždeniâ tolstostennogo pressovannogo profilâ iz splava EN AW-6060 na vyhodnom stole, In: Metallurgičeskaja i gornorudnaja promyšlennost' (2), S. 33–38
-
(2011): Correlation of temperature-speed extrusion parameters; tool design and quality of profiles of magnesium alloys, Metallurgical and mining industry 3, 2011 (7), 23-31
-
(2010): Extrusion and Air-Water Cooling of AlSi1MgMn Alloy Extruded Profiles, Metallurgical and mining industry 2, 2010 (5), 355-362
-
(2009): Experimental research of pressing strips made of Mg-Al-Zn-Mn system alloy through precombustion chamber matrixes, Metallurgiceskaja i gornorudnaja promyvlennost' Vol. 255, Nr. 3, S. 88-91, 2009.
-
(2008): Analyse der Besonderheiten beim Strangpressen von bimetallischen Aluminium-Magnesium-Verbunden, Theorie und Praxis der Metallurgie, Nr. 5-6, S. 46-50, 2008.
-
(2008): Influence of the die geometry parameters on the quality of the aluminum thick -wall extruded strips, Herald of the DSEA, Nr. 3E (14), S. 27-39, 2008.
-
(2006): The influence of direct extrusion process parameters on the temperature of profile of aluminium alloy, Metallurgiceskaja i gornorudnaja promyvlennost', Nr. 6, S. 39-42, 2006.
-
(2005): Resorbierbare Implantate aus Magnesium durch Mikrolegieren mit Calcium, deren Verarbeitung und Eigenschaften, R. Thull und R. Gradinger (Hg.): Bio materialien - Interdisciplinary Journal of Functional Meterials, Biomechanics and Tissue Engineering. DGBM (6).
Konferenz
-
(2019): Influence of Increased Manganese Content on the Precipitation Behaviour of AISI H10 in Thermomechanical Fatigue Tests, In: WGP (Hrsg.): WGP Kongress 2019. Hamburg. 29.09.-02.10.2019, S. 189-197
-
(2018): Manufacturing of seamless tubes of the alloy Al-5Mg-0,2Sc by direct extrusion and sink drawing, In: Materials Science and Engineering, MSE 2018. European Congress and Exhibition on Advanced Materials and Processes. Darmstadt. 26-28.09.2018
-
(2018): Effect of Manganese on Nitriding and Softening Behaviour of Steel AISI H10 Under Cyclic Thermal Loads, In: Schmitt, R.; Schuh, G. (Hrsg.): Advances in Production Research. WGP 2018. Aachen. 19.11.-20.11.2018, S. 423-432
DOI: 10.1007/978-3-030-03451-1_42 -
(2017): Aktuelle Forschungsschwerpunkte in der Massivumformung, In: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017. TEWISS, Garbsen, 2017, S. 15-32
-
(2017): Clinchen für Anwendungen mit zyklisch thermischer und mechanischer Belastung, In: Gemeinsame Forschung in der Mechanischen Fügetechnik. Tagungsunterlagen des 7. Fügetechnischen Gemeinschaftskolloquiums. Dresden. 12-13 Dezember, 2017, S. 91-96
-
(2017): Modernization Of An Electric-Weld Plant For Performing Combined Roll Forming And Heat-Treatment Processes, In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, Seite 28
-
(2017): Water-Air Spray Cooling At Heat Treatment Of Cylindrical Samples, In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 13
-
(2017): Fem Analysis Of Multilayer And Polygonal Pipes Designed For Subsea Umbilical Pipelines, In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 10
-
(2017): FEM analysis of multilayer pipes designed for subsea umbilicals, In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 159-171
-
(2017): Properties Of An Intelligent Hot-Working Tool Steel With Alloy Adapted Nitriding Layers, In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 49
-
(2017): Properties Of Clinched Stainless Steel Sheets As A Result Of Thermal Loading, In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 47
-
(2017): Changes of the metal temperature at the axial water-air cooling of cylindrical samples, In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 32-38
-
(2017): Change of metal temperature at heat treatment with water-air spray cooling, In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 27-31
-
(2017): Einfluss der lokalen Mikrostruktur auf die Umformbarkeit stranggepresster Werkstoffverbunde, In: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 192
-
(2017): Co-extrusion of semi-finished aluminium-steel compounds, In: Brabazon, D.; Naher, S.; Ahad, I. U. (Hrsg.): Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. 26-28 April 2017, Dublin, Ireland. AIP Publishing LLC, Melville, New York, 2017, S. 140002
DOI: 10.1063/1.5008158 -
(2016): Development of intelligent hot forging tools with increased wear resistance by cyclic edge-zone hardening, In: Proceedings of the 10th TOOL Conference 2016. Bratislava, Slowakei. 04.10. - 07.10.2016, S. 316-325
-
(2012): Implementation of Heat Treatment into the Aluminum Extrusion Process, Materials Science & Technology 2012. ACerS, AIST ASM TMS NACE. Pittsburgh, Pennsylvania, USA, 07.10.2012