Dr.-Ing. Florian Nürnberger

Dr.-Ing. Florian Nürnberger
Adresse
An der Universität 2
30823 Garbsen
Gebäude
Raum
115
Dr.-Ing. Florian Nürnberger
Adresse
An der Universität 2
30823 Garbsen
Gebäude
Raum
115

Links zu wissenschaftlichen Profilen

Publikationen

Zeitschriften/Aufsätze

  • Barienti, K.; Werwein, S.; Herbst, S.; Maier, H. J.; Nürnberger, F. (2023): A novel way to reduce the critical deformation for cold roll bondingManufacturing Letters 36, 2023, 9-12
    DOI: 10.1016/j.mfglet.2022.12.006
  • Frolov, Y.; Bobukh, O.; Samsonenko, A.; Nürnberger, F. (2023): Patterning of Surfaces for Subsequent Roll Bonding in a Low-Oxygen Environment Using Deformable Mesh InlaysJMMP 7, 2023 (5), 158
    DOI: 10.3390/jmmp7050158
  • Herbst, S.; Karsten, E.; Gerstein, G.; Reschka, S.; Nürnberger, F.; Zaefferer, S.; Maier, H. J. (2023): Electroplasticity Mechanisms in hcp MaterialsAdv. Eng. Mater., 2023
    DOI: https://doi.org/10.1002/adem.202201912
  • Raumel, S.; Barienti, K.; Luu, H.-T.; Merkert, N.; Dencker, F.; Nürnberger, F.; Maier, H. J.; Wurz, M. C. (2023): Characterization of the tribologically relevant cover layers formed on copper in oxygen and oxygen-free conditionsFriction, 11, 2023
    DOI: 10.1007/s40544-022-0695-5
  • Reulbach, M.; Evers, P.; Emonde, C.; Behnsen, H.; Nürnberger, F.; Windhagen, H.; Jakubowitz, E. (2023): Implications of ageing effects on thermal and mechanical properties of PMMA-based bone cement for THA revision surgeryJournal of the Mechanical Behavior of Biomedical Materials, 148, 2023, 106218
    DOI: 10.1016/j.jmbbm.2023.106218
  • Wackenrohr, S.; Herbst, S.; Wöbbeking, P.; Gerstein, G.; Nürnberger, F. (2023): Correlating Ultrasonic Velocity in DC04 with Microstructure for Quantification of Ductile DamageJMMP 7, 2023 (4), 142
    DOI: 10.3390/jmmp7040142
  • Coors, T.; Faqiri, M. Y.; Saure, F.; Kahra, C.; Büdenbender, C.; Peddinghaus, J.; Prasanthan, V.; Pape, F.; Hassel, T.; Herbst, S.; Nürnberger, F.; Wester, H.; Uhe, J.; Breidenstein, B.; Denkena, B.; Behrens, B.-A.; Poll, G.; Maier, H. J. (2022): Investigations on Additively Manufactured Stainless BearingsInvestigations on Additively Manufactured Stainless Bearings. Coatings 12, 2022 (11), 1699
    DOI: 10.3390/coatings12111699
  • Fricke, L. V.; Thürer, S. E.; Kahra, C.; Bährisch, S.; Herbst, S.; Nürnberger, F.; Behrens, B.-A.; Maier, H. J.; Klose, C.; Barton, S. (2022): Non-destructive Evaluation of Workpiece Properties along the Hybrid Bearing Bushing Process ChainJ. of Materi Eng and Perform 11, 2022 (2), 5725
    DOI: 10.1007/s11665-022-07598-3
  • Fromm, A. C.; Barienti, K.; Selmanovic, A.; Thürer, S. E.; Nürnberger, F.; Maier, H. J.; Klose, C. (2022): Oxygen-Free Compound Casting of Aluminum and Copper in a Silane-Doped Inert Gas AtmosphereInter Metalcast 20, 2022 (1), 1701027
    DOI: 10.1007/s40962-022-00910-w
  • Sheveleva, T.; Wawer, M. L.; Oladazimi, P.; Koepler, O.; Nürnberger, F.; Lachmayer, R.; Auer, S.; Mozgova, I. (2022): Creation of a Knowledge Space by Semantically Linking Data Repository and Knowledge Management System - a Use Case from Production EngineeringIFAC-PapersOnLine 55, 2022 (10), 2030-2035
  • Thürer, S. E.; Peters, K.; Heidenblut, T.; Heimes, N.; Peddinghaus, J.; Nürnberger, F.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished ProductsMaterials (Basel, Switzerland) 15, 2022 (5), 1692
    DOI: 10.3390/ma15051692
  • Wackenrohr, S.; Torrent, C. J. J.; Herbst, S.; Nürnberger, F.; Krooss, P.; Ebbert, C.; Voigt, M.; Grundmeier, G.; Niendorf, T.; Maier, H. J. (2022): Corrosion fatigue behavior of electron beam melted iron in simulated body fluidnpj Mater Degrad 6, 2022 (1), 1917
    DOI: 10.1038/s41529-022-00226-4
  • Wolf, M.; Flormann, J.; Steinhoff, T.; Gerstein, G.; Nürnberger, F.; Maier, H. J.; Feldhoff, A. (2022): Cu-Ni-Based Alloys from Nanopowders as Potent Thermoelectric Materials for High-Power Output ApplicationsAlloys 1, 2022 (1), 3-14
    DOI: 10.3390/alloys1010002
  • Barienti, K.; Klein, M.; Wackenrohr, S.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2021): Influence of Pre-strain on Very-Low-Cycle Stress–Strain Response and Springback BehaviorJ. of Materi Eng and Perform 5, 2021 (3), 4353
    DOI: 10.1007/s11665-020-05399-0
  • Behrens, B.-A.; Uhe, J.; Petersen, T.; Nürnberger, F.; Kahra, C.; Ross, I.; Laeger, R. (2021): Contact Geometry Modification of Friction-Welded Semi-Finished Products to Improve the Bonding of Hybrid ComponentsMetals 11, 2021 (1), 115
    DOI: 10.3390/met11010115
  • Gerstein, G.; Kahra, C.; Golovko, O.; Schäfke, F.; Klose, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2021): Hot forming of shape memory alloys in steel shellsProd. Eng. Res. Devel. 481–482, 2021 (3), 266
    DOI: 10.1007/s11740-021-01024-8
  • Hinz, L.; Metzner, S.; Müller, P.; Schulte, R.; Besserer, H.-B.; Wackenrohr, S.; Sauer, C.; Kästner, M.; Hausotte, T.; Hübner, S.; Nürnberger, F.; Schleich, B.; Behrens, B.-A.; Wartzack, S.; Merklein, M.; Reithmeier, E. (2021): Fringe Projection Profilometry in Production MetrologySensors 21, 2021 (7), 2389
    DOI: 10.3390/s21072389
  • Hordych, I.; Barienti, K.; Herbst, S.; Maier, H. J.; Nürnberger, F. (2021): Cold Roll Bonding of Tin-Coated Steel Sheets with Subsequent Heat TreatmentMetals 11, 2021 (6), 917
    DOI: 10.3390/met11060917
  • Kahra, C.; Nürnberger, F.; Maier, H. J.; Herbst, S. (2021): Heat Transfers Coefficients of Directly and Indirectly Cooled Component Areas during Air-Water Spray CoolingHTM 76, 2021 (1), 64-75
    DOI: 10.1515/htm-2020-0005
  • Raumel, S.; Barienti, K.; Dencker, F.; Nürnberger, F.; Wurz, M. C. (2021): Einfluss von Silan-dotierten Umgebungsatmosphären auf tribologischen Eigenschaften von TitanT+S (Tribologie und Schmierungstechnik) 68, 2021 (1), 5-13
    DOI: 10.24053/TuS-2021-0002
  • Baldan, M.; Stolte, M.-H.; Nacke, B.; Nurnberger, F. (2020): Improving the accuracy of FE simulations of induction tempering towards a microstructure-dependent electromagnetic modelIEEE Trans. Magn. 56, 2020 (10), 1-9
    DOI: 10.1109/TMAG.2020.3013562
  • Barienti, K.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Ion Beam Processing for Sample Preparation of Hybrid Materials with Strongly Differing Mechanical PropertiesMetallogr. Microstruct. Anal. 9, 2020 (1), 54-60
    DOI: 10.1007/s13632-019-00605-5
  • Behrens, B.-A.; Chugreeva, A.; Diefenbach, J.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Microstructural Evolution and Mechanical Properties of Hybrid Bevel Gears Manufactured by Tailored FormingMetals 10, 2020 (10), 1365
    DOI: 10.3390/met10101365
  • Behrens, B.-A.; Maier, H. J.; Poll, G.; Wriggers, P.; Aldakheel, F.; Klose, C.; Nürnberger, F.; Pape, F.; Böhm, C.; Chugreeva, A.; Coors, T.; Duran, D.; Thürer, S. E.; Herbst, S.; Hwang, J.-I.; Matthias, T.; Heimes, N.; Uhe, J. (2020): Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushingProd. Eng. Res. Devel. 14, 2020 5-6, 569-581
    DOI: 10.1007/s11740-020-00992-7
  • Coors, T.; Mildebrath, M.; Büdenbender, C.; Saure, F.; Faqiri, M. Y.; Kahra, C.; Prasanthan, V.; Chugreeva, A.; Matthias, T.; Budde, L.; Pape, F.; Nürnberger, F.; Hassel, T.; Hermsdorf, J.; Overmeyer, L.; Breidenstein, B.; Denkena, B.; Behrens, B.-A.; Maier, H. J.; Poll, G. (2020): Investigations on Tailored Forming of AISI 52100 as Rolling Bearing RacewayMetals 10, 2020 (10), 1363
    DOI: 10.3390/met10101363
  • Coors, T.; Pape, F.; Kruse, J.; Blohm, T.; Beermann, R.; Quentin, L.; Herbst, S.; Langner, J.; Stonis, M.; Kästner, M.; Reithmeier, E.; Nürnberger, F.; Poll, G. (2020): Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored propertiesInt J Adv Manuf Technol 108, 2020 7-8, 2409-2417
    DOI: 10.1007/s00170-020-05532-2
  • Schulz, A.; Cui, C.; Steinbacher, M.; Ümit, T.; Wunde, M.; Jung, I.; Acar, S.; Nürnberger, F.; Gerstein, G.; Herbst, S.; Maier, H. J. (2020): Effects of Cryogenic Treatment on the Microstructure and Mechanical Properties of High-alloyed Tool SteelsHTM 75, 2020 (5), 287-307
    DOI: 10.3139/105.110422
  • Wernicke, S.; Hahn, M.; Gerstein, G.; Nürnberger, F.; Tekkaya, A. E. (2020): Strain path dependency in incremental sheet-bulk metal formingInt J Mater Form 90, 2020 (7), 3585
    DOI: 10.1007/s12289-020-01537-0
  • Acar, S.; Gerstein, G.; Cui, C.; Schulz, A.; Nürnberger, F. (2019): Preparation Methods for Scanning Electron Microscope Characterization of Nano-Carbides in Cold Work Steel X153CrMoV12Pract. Metallogr. 56, 2019 (5), 303-316
    DOI: 10.3139/147.110555
  • Barienti, K.; Wolff, D.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2019): Influence of Alternating Short-Cycle Bending on the Mechanical Properties of Copper, α-Titanium and the Mild Steel DC01J. of Materi Eng and Perform 28, 2019 (11), 7165-7170
    DOI: 10.1007/s11665-019-04458-5
  • Behrens, B.-A.; Breidenstein, B.; Duran, D.; Herbst, S.; Lachmayer, R.; Löhnert, S.; Matthias, T.; Mozgova, I.; Nürnberger, F.; Prasanthan, V.; Siqueira, R.; Töller, F.; Wriggers, P. (2019): Simulation-Aided Process Chain Design for the Manufacturing of Hybrid ShaftsHTM 74, 2019 (2), 115-135
    DOI: 10.3139/105.110378
  • Reschka, S.; Gerstein, G.; Dalinger, A.; Herbst, S.; Nürnberger, F.; Zaefferer, S. (2019): Visualization and Observation of Morphological Peculiarities of Twin Formation in Mg-Based Samples After Electrically Assisted FormingMetallogr. Microstruct. Anal. 8, 2019 (6), 806-814
    DOI: 10.1007/s13632-019-00589-2
  • Schmidt, H. C.; Homberg, W.; Orive, A. G.; Grundmeier, G.; Duderija, B.; Hordych, I.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2019): Joining of blanks by cold pressure welding: Incremental rolling and strategies for surface activation and heat treatmentMaterialwiss. Werkstofftech. 50, 2019 (8), 924-939
    DOI: 10.1002/mawe.201900031
  • Zeller, S.; Baldrich, M.; Gerstein, G.; Nuernberger, F.; Loehnert, S.; Maier, H. J.; Wriggers, P. (2019): Material models for the thermoplastic material behaviour of a dual-phase steel on a microscopic and a macroscopic length scaleJournal of the Mechanics and Physics of Solids 129, 2019, 205-228
    DOI: 10.1016/j.jmps.2019.04.012
  • Demler, E.; Gerstein, G.; Dalinger, A.; Epishin, A.; Heidenblut, T.; Nürnberger, F.; Maier, H. J. (2018): Influence of High Current-Density Impulses on the Stress-Strain Response and Microstructural Evolution of the Single Crystal Superalloy CMSX-4Materials Research 21, 2018 (6), 1063
    DOI: 10.1590/1980-5373-MR-2018-0428
  • Demler, E.; Gerstein, G.; Dalinger, A.; Nürnberger, F.; Epishin, A.; Molodov, D. A. (2018): Effect of Electrical Pulses on the Mechanical Behavior of Single Crystals of Nickel-Based CMSX-4 Superalloy and the Mobility of Low-Angle Grain Boundary in Aluminum BicrystalsBulletin of the Russian Academy of Sciences: Physics 82, 2018 (9), 1079-1085
    DOI: 10.3103/S106287381809006X
  • Demler, E.; Rodman, D.; Rodman, M.; Gerstein, G.; Grydin, O.; Briukhanov, A. A.; Klose, C.; Nürnberger, F.; Maier, H. J. (2018): The Influence of Alternating Low-Cycle Bending Loads on Sheet Properties Having an Hcp Crystal LatticeJ. of Materi Eng and Perform 27, 2018 (2), 541-549
    DOI: 10.1007/s11665-018-3123-2
  • Herbst, S.; Maier, H. J.; Nürnberger, F. (2018): Strategies for the Heat Treatment of Steel-Aluminium Hybrid ComponentsHTM 73, 2018 (5), 268-282
    DOI: 10.3139/105.110368
  • Wolf, L. O.; Cordebois, J.-P.; Rodman, D.; Nürnberger, F.; Maier, H. J. (2018): Effect of Different Intercritical Annealing Treatments without and with Overaging on the Mechanical Material BehaviorSteel Research Int. 89, 2018 (10), 1800196
    DOI: 10.1002/srin.201800196
  • Behrens, B.-A.; Nürnberger, F.; Bonk, C.; Hübner, S.; Behrens, S.; Vogt, H. (2017): Influences on the formability and mechanical properties of 7000-aluminum alloys in hot and warm formingJ. Phys.: Conf. Ser. 896, 2017, 12004
    DOI: 10.1088/1742-6596/896/1/012004
  • Demler, E.; Gerstein, G.; Dalinger, A.; Epishin, A.; Rodman, D.; Nürnberger, F. (2017): Influence of High-Current-Density Impulses on the Compression Behavior: Experiments with Iron and a Nickel-Based AlloyJournal of Materials Engineering and Performance 26, 2017 (1), 177-184
    DOI: 10.1007/s11665-016-2457-x
  • Gerstein, G.; Besserer, H.-B.; Nürnberger, F.; Barrales-Mora, L. A.; Shvindlerman, L. S.; Estrin, Y.; Maier, H. J. (2017): Formation and growth of voids in dual-phase steel at microscale and nanoscale levelsJournal of Materials Science 52, 2017 (8), 4234-4243
    DOI: 10.1007/s10853-016-0678-x
  • Gerstein, G.; Clausmeyer, T.; Isik, K.; Nürnberger, F.; Tekkaya, A. E.; Bruchanov, A. A.; Maier, H.J. (2017): Experimental analysis of anisotropic damage in dual-phase steel by resonance measurementInternational Journal of Damage Mechanics 26, 2016 (8), 1147-1169
    DOI: 10.1177/1056789516650245
  • Gerstein, G.; Isik, K.; Gutknecht, F.; Sieczkarek, P.; Ewert, J.; Tekkaya, A. E.; Clausmeyer, T.; Nürnberger, F. (2017): Microstructural characterization and simulation of damage for geared sheet componentsJ. Phys.: Conf. Ser. 896, 2017, 12076
    DOI: 10.1088/1742-6596/896/1/012076
  • Herbst, S.; Aengeneyndt, H.; Maier, H. J.; Nürnberger, F. (2017): Microstructure and Mechanical Properties of Friction Welded Steel-Aluminum Hybrid Components after T6 Heat TreatmentMaterials Science and Engineering: A 696, 2017, 33-41
    DOI: 10.1016/j.msea.2017.04.052
  • Herbst, S.; Dovletoglou, C. N.; Nürnberger, F. (2017): Method for Semi-Automated Measurement and Statistical Evaluation of Iron Aluminum Intermetallic Compound Layer Thickness and MorphologyMetallogr. Microstruct. Anal. 6, 2017 (5), 367-374
    DOI: 10.1007/s13632-017-0378-1
  • Nürnberger, F.; Gerstein, G.; Dalinger, A.; Thürer, S. E.; Vinogradov, A.; Feldhoff, A.; Maier, H. J. (2017): Surface modification of an austenitic stainless steel wire by a multi-pulse treatment with a high-power electric currentJournal of Materials Science 52, 2017 (13), 8007-8015
    DOI: 10.1007/s10853-017-1003-z
  • Wolf, L. O.; Nürnberger, F.; Rodman, D.; Maier, H. J. (2017): 1-Step “Quenching and Partitioning” of the Press-Hardening Steel 22MnB5Steel Research Int. 88, 2017 (6), 1600307
    DOI: 10.1002/srin.201600307
  • Wolf, L. O.; Nürnberger, F.; Rodman, D.; Maier, H. J. (2017): The Effect of Intercritical Annealing on the Microstructure and Mechanical Properties of Ferritic-Martensitic Two-Phase SteelsSteel Research Int. 88, 2017 (2), 271-280
    DOI: 10.1002/srin.201600107
  • Herbst, S.; Schledorn, M.; Maier, H. J.; Milenin, A.; Nürnberger, F. (2016): Process Integrated Heat Treatment of a Microalloyed Medium Carbon Steel: Microstructure and Mechanical PropertiesJ. of Materi Eng and Perform 25, 2016 (4), 1453-1462
    DOI: 10.1007/s11665-016-2004-9
  • Besserer, H.-B.; Boiarkin, V.; Rodman, D.; Nürnberger, F. (2016): Qualifying Electrically Conductive Cold Embedding-Media for Scanning Electron MicroscopyMetallogr. Microstruct. Anal. 5, 2016 (4), 332-341
    DOI: 10.1007/s13632-016-0286-9
  • Besserer, H.-B.; Dalinger, A.; Rodman, D.; Nürnberger, F.; Hildenbrand, P.; Merklein, M.; Maier, H. J. (2016): Induction heat treatment of sheet-bulk metal-formed parts assisted by water-air spray coolingSteel Research Int. 87, 2016 (9), 1220-1227
    DOI: 10.1002/srin.201500404
  • Besserer, H.-B.; Gerstein, G.; Dalinger, A.; Jablonik, L.; Rodman, D.; Nürnberger, F. (2016): Ion Beam Processing in the Sample Preparation for the Analysis of Ductile Damage in Deep Drawing SteelsPrakt. Metallogr. 53, 2016 (4), 221-236
    DOI: 10.3139/147.110377
  • Besserer, H.-B.; Gerstein, G.; Maier, H. J.; Nürnberger, F. (2016): Specimen Preparation by Ion Beam Slope Cutting for Characterization of Ductile Damage by Scanning Electron MicroscopyMicrosc. Res. Tech. 79, 2016 (4), 321-327
    DOI: 10.1002/jemt.22633
  • Besserer, H.-B.; Hildenbrand, P.; Gerstein, G.; Rodman, D.; Nürnberger, F.; Merklein, M.; Maier, H. J. (2016): Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming ProcessesJournal of Materials Engineering and Performance 25, 2016 (3), 1136-1142
    DOI: 10.1007/s11665-016-1908-8
  • Bryukhanov, A. A.; Gerstein, G.; Dyachok, D. A.; Nürnberger, F. (2016): Effect of Deformation Texture on the Anisotropy of Elasticity and Damage of Two Phase Steel SheetsThe Physics of Metals and Metallography 117, 2016 (7), 719-724
    DOI: 10.1134/S0031918X16050033
  • Gerstein, G.; Bruchanov, A. A.; Dyachok, D. V.; Nürnberger, F. (2016): The effect of texture in modeling deformation processes of bcc steel sheetsMaterials Letters 164, 2016, 356-359
    DOI: 10.1016/j.matlet.2015.11.007
  • Gerstein, G.; Clausmeyer, T.; Isik, K.; Nürnberger, F.; Tekkaya, A. E.; Bruchanov, A. A.; Maier, H. J. (2016): Experimental analysis of anisotropic damage in dual-phase steel by resonance measurementInternational Journal of Damage Mechanics, 2016
    DOI: 10.1177/1056789516650245
  • Herbst, S.; Besserer, H.-B.; Grydin, O.; Milenin, A.; Maier, H. J.; Nürnberger, F. (2016): Holistic consideration of grain growth behavior of tempering steel 34CrNiMo6 during heating processesJournal of Materials Processing Technology 229, 2016, 61-71
    DOI: 10.1016/j.jmatprotec.2015.09.015
  • Herbst, S.; Steinke, K. F.; Maier, H. J.; Milenin, A.; Nürnberger, F. (2016): Determination of heat transfer coefficients for complex spray cooling arrangementsInternational Journal of Microstructure and Materials Properties 11, 2016 3/4, 229-246
    DOI: 10.1504/IJMMP.2016.079149
  • Hordych, I.; Rodman, D.; Nürnberger, F.; Hoppe, C.; Schmidt, H. C.; Grundmeier, G.; Homberg, W.; Maier, H. J. (2016): Effect of Pre-Rolling Heat Treatments on the Bond Strength of Cladded Galvanized Steels in a Cold Roll Bonding ProcessSteel Research Int. 87, 2016 (12), 1619-1626
    DOI: 10.1002/srin.201600021
  • Isik, K.; Gerstein, G.; Clausmeyer, T.; Nürnberger, F.; Tekkaya, A. E.; Maier, H. J. (2016): Evaluation of Void Nucleation and Development during Plastic Deformation of Dual-Phase Steel DP600Steel Research Int. 87, 2016 (12), 1583-1591
    DOI: 10.1002/srin.201500483
  • Isik, K.; Gerstein, G.; Gutknecht, F.; Clausmeyer, T.; Nürnberger, F.; Maier, H. J.; Tekkaya, A. E. (2016): Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punchingProcedia Structural Integrity 2, 2016, 673-680
    DOI: 10.1016/j.prostr.2016.06.087
  • Isik, K.; Gerstein, G.; Schneider, T.; Schulte, R.; Rosenbusch, D.; Clausmeyer, T.; Nürnberger, F.; Vucetic, M.; Koch, S.; Hübner, S.; Behrens, B.-A.; Tekkaya, A. E.; Merklein, M. (2016): Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal formingProduction Engineering 10, 2016 (1), 5-15
    DOI: 10.1007/s11740-016-0656-9
  • Lehmann, R.; Schmidt, H. J.; Costa, B. F. O.; Blumers, M.; Sansano, A.; Rull, F.; Wengerowsky, D.; Nürnberger, F.; Maier, H. J.; Klingelhöfer, G.; Renz, F. (2016): 57Fe Mössbauer, SEM/EDX, p-XRF and μ-XRF studies on a Dutch paintingHyperfine Interact 237, 2016 (1)
    DOI: 10.1007/s10751-016-1296-3
  • Milenin, A.; Kustra, P.; Byrska-Wójcik, D.; Grydin, O.; Schaper, M.; Mentlein, T.; Gerstein, G.; Nürnberger, F. (2016): Analysis of Microstructure and Damage Evolution in Ultra-Thin Wires of the Magnesium Alloy MgCa0.8 at Multipass DrawingJOM 68, 2016 (12), 3063-3069
    DOI: 10.1007/s11837-016-2127-3
  • Andreiev, A.; Golovko, O.; Frolov, I.; Nürnberger, F.; Wolf, L. O.; Schaper, M.; Grydin, O. (2015): Testing of pipe sectionsMaterials Testing 57, 2015 (7-8); 643-648.
    DOI: 10.3139/120.110759
  • Golovko, O.; Bieliaiev, S. M.; Nürnberger, F.; Danchenko, V. M. (2015): Extrusion of the bimetallic aluminum-magnesium rods and tubesForsch Ingenieurwes 79, 2015 (1-2); 17–27
    DOI: 10.1007/s10010-015-0184-3
  • Grygier, D.; Dudziński, W.; Gerstein, G.; Nürnberger, F. (2015): The effectiveness of spheroidization pearlitic steel with regard to the degree of plastic deformationInterdisciplinary Journal of Engineering Sciences, 3, 2015 (1); 6-9
  • Ebbert, C.; Schmidt, H. C.; Rodman, D.; Nürnberger, F.; Homberg, W.; Maier, H. J.; Grundmeier, G. (2014): Joining with electrochemical support (ECUF): Cold pressure welding of copperJournal of Materials Processing Technology, 2014, vol. 214, 2179–2187
    DOI: http://dx.doi.org/10.1016/j.jmatprotec.2014.04.015
  • Gerstein, G.; Nürnberger, F.; Dudzinski, W.; Grygier, D.; Schaper, M.; Milenin, A. (2014): Structural Evolution of Thin Lamellar Cementite during Cold Drawing of Eutectoid SteelsProcedia Engineering 2014 (81), S. 694–699
    DOI: 10.1016/j.proeng.2014.10.062
  • Grittner, N.; Striewe, B.; von Hehl, A.; Engelhardt, M.; Klose, C.; Nürnberger, F. (2014): Characterization of the interface of co-extruded asymmetric aluminum-titanium composite profilesMaterialwissenschaft und Werkstofftechnik, 2014, 45; S. 1054-1060
    DOI: 10.1002/mawe.201400353
  • Grydin, O.; Nürnberger, F.; Zou, Y.; Schaper, M.; Brosius, A. (2014): Formation and Properties of Mixed Ferritic-Martensitic Microstructures in the Air-Hardening Steel LH800steel research int. 85 (9), S. 1340-1347
    DOI: 10.1002/srin.201300420
  • Herbst, S.; Gerstein, G.; Nürnberger, F.; Bach, F.-W. (2014): Suitable Impact Parameters for High-Speed Joining and Influence on the Bonding Zone MicrostructureJournal of Materials Engineering and Performance 23 (3), S. 944-953
    DOI: 10.1007/s11665-013-0845-z
  • M. Stolbchenko, O. Grydin, M. Schaper, F. Nürnberger, A. Samsonenko (2014): Sandwich rolling of twin-roll cast aluminium-steel clad stripsProcedia Engineering 2014 (81) S. 1541-1546
    DOI: 10.1016/j.proeng.2014.10.187
  • O. Golovko, I. Frolov, D. Rodman, F. Nürnberger, O. Grydin, M. Schaper (2014): Spray cooling of extruded EN AW-6082 aluminium alloy sheets: spatial heat transfer coefficientsForsch Ingenieurwes 78 (1-2), S. 1-7
    DOI: 10.1007/s10010-014-0181-y
  • Grydin, O.; Gerstein, G.; Nürnberger, F.; Schaper, M.; Danchenko, V. (2013): Twin-roll casting of aluminum–steel clad stripsIn: Journal of Manufacturing Processes 15 (4), S. 501–507.
  • Grydin, O.; Stolbchenko, M.; Nürnberger, F.; Schaper, M. (2013): Influence of Hot Deformation on Mechanical Properties and Microstructure of a Twin-Roll Cast Aluminium Alloy EN AW-6082Journal of Materials Engineering and Performance 23 (3), S. 937-943 Weitere Informationen
    DOI: 10.1007/s11665-013-0816-4
  • Herbst, S.; Jablonik, L.; Gerstein, G.; Nürnberger, F.; Bach, Fr.-W. (2013): Topographieoptimierende Präparation metallischer WerkstoffverbundeIn: Praktische Metallographie / Practical Metallography 50 (7), S. 491–500. Online verfügbar unter http://www.practical-metallography.com/PM110242.
  • Nowak, M.; Golovko, O.; Nürnberger, F.; Frolov, I.; Schaper, M. (2013): Water-Air Spray Cooling of Extruded Profiles: Process Integrated Heat Treatment of the Alloy EN AW-6082Journal of Materials Engineering and Performance 22, 2013 (9), 2580-2587
  • Rodman, D.; Boiarkin, V.; Nürnberger, F.; Dalinger, A.; Schaper, M.; (2013): Modeling of Spray Cooling during Induction Hardening of Spur Gearwheels Made from 42CrMo4 Hardening and Tempering SteelSteel Research Int. 85 (5), S. 741-755
    DOI: 10.1002/srin.201300201
  • Rodman, D.; Nürnberger, F.; Dalinger, A.; Schaper, M.; Krause, C.; Kästner, M.; Reithmeier, E. (2013): Tempering Induction Hardened 42CrMo4 Steel Helical Gearwheels from Residual Heat Using Spray Coolingsteel research int. 85 (3), S. 415-425
    DOI: 10.1002/srin.201300133
  • Schaper, M.; Grydin, O.; Nürnberger, F. (2013): Microstructure evolution of the air-hardening steel LH800 due to heat treatmentIn: Journal of Heat Treatment and Materials 68 (1), S. 42–48
  • Behrens, B. - A.; Bach, Fr.-W.; Bouguecha, A.; Nürnberger, F.; Schaper, M.; Yu, Z.; Klassen, A. (2012): Numerische Berechnung einer integrierten Wärmebehandlung für präzisionsge-schmiedete BauteileIn: Journal of Heat Treatment and Materials 67, S. 337–343. Online verfügbar unter http://www.htm-journal.de/HT110156.
  • Faßmann, D.; Gerstein, G.; Gerstein, D.; Nürnberger, F.; Schaper, M.; Bach, Fr.-W. (2012): Preparation Routine for In Situ Strain Analysis of deep drawing Steel DC04 by Means of Transmission Electron MicroscopyIn: Praktische Metallographie 2012 (9), S. 577–587
  • Frolov, I.; Golovko, O.; Nürnberger, F.; Gretzki, T. (2012): Analiz parametrov vodo-vozdušnogo sprejernogo ohlaždeniâ metalla v integrirovannyh tehnologičeskih processahMetallurgičeskaja i gornorudnaja promyšlennost' 7, 2012, 208-212
  • Frolov, I.; Golovko, O.; Nürnberger, F.; Gretzki, T. (2012): Analiz izmeneniya temperatury metalla pri osevom vodovozdushnom spreyernom okhlazhdenii stalnykh tsilindricheskikh obraztsovMetallurgičeskaja i gornorudnaja promyšlennost' 6, 2012, 33-39
  • Golovko A. N.; Rodman, D.; Nürnberger, F.; Schaper, M.; Frolov, Y. V.; Bieliaiev, S. M. (2012): Investigation of the Water-Air Cooling Process of the Thick-Walled Extruded Profile Made of Alloy AW-6060 on the Output TableMetallurgical and mining industry 4 (2), S. 66–74
  • Golovko, O.; Rodman, D.; Nürnberger, F.; Schaper, M.; Frolov, I.; Bieliaiev, S. M. (2012): Issledovanie processa vodo-vozdušnogo ohlaždeniâ tolstostennogo pressovannogo profilâ iz splava EN AW-6060 na vyhodnom stoleIn: Metallurgičeskaja i gornorudnaja promyšlennost' (2), S. 33–38
  • Nürnberger, F.; Stolbchenko, M.; Grydin, O.; Gerstein, G.; Faßmann, D.; Schaper, M. (2012): Numerical investigation of in situ TEM tensile testsIn: Metallurgical and mining industry 4 (4), S. 37–44
  • Rodman, D.; Krause. C.; Nürnberger, F.; Bach, Fr.-W.; Gerdes, L.; Breidenstein, B. (2012): Investigation of the surface residual stresses in spray cooled induction hardened gearwheelsInternational Journal of Materials Research, Vol. 103, Nr. 1, pp. 73-79
    DOI: 10.3139/146.110622
  • Yu, Z.; Kuznietsov, K.; Mozgova, I.; Böhm, V.; Gretzki, T.; Nürnberger, F.; Schaper, M.; Reimche, W. (2012): Modeling the relationship between hardness and spray cooling parameters for pinion shafts using a neuro-fuzzy model strategy In: Journal of Heat Treatment and Materials 67 (1), S. 39–47.
  • Diekamp, M.; Hübner, S.; Nürnberger, F.; Schaper, M.; Behrens, B.- A.; Bach, Fr.-W. (2011): Prozessoptimiertes Presshärten mittels Sprühkühlung – prozessintegrierte Wärme-behandlung von Blechen des Werkstoffes 22MnB5 In: HTM - Journal of Heat Treatment and Materials 2011 (6), S. 316–322. Online verfügbar unter http://www.htm-journal.de/HT110118
  • Nürnberger, F.; Grydin, O.; Yu, Z.; Schaper, M. (2011): Microstructural Behaviour of Tempering Steels during Precision Forging and Quenching from Hot-forming TemperaturesMetallurgical and Mining Industry, 2011, Vol. 3, No. 7, S. 79-86
  • Rodman, D.; Kerber, K.; Yu, Z.; Mozgova, I.; Nürnberger, F.; Bach, Fr.-W. (2011): Orts- und temperaturabhängige Wärmeübergangskoeffizienten bei der Sprühkühlung von AlSi10Mg-GussplattenForschung im Ingenieurwesen Vol. 75, Nr. 1, S. 25-34, 2011.
    DOI: 10.1007/s10010-011-0131x
  • Rodman, D.; Krause, C.; Nürnberger, F.; Bach, Fr.-W.; Haskamp, K.; Kästner, M.; Reithmeier, E. (2011): Induction hardening of spur gearwheels made from 42CrMo4 hardening and tempering steel by employing spray coolingSteel Research International Vol. 82, Nr. 4, S. 329-336, 2011.
    DOI: 10.1002/srin.201000218
  • Bach, Fr.-W.; Schaper, M.; Yu, Z.; Nürnberger, F.; Gretzki, T.; Rodman, D.; Springer, R. (2010): Computation of isothermal transformation diagrams of 42CrMo4 steel from dilatometer measurements with continuous cooling.International Heat Treatment and Surface Engineering Vol. 4, Nr. 4, S. 171-175, 2010.
  • Nürnberger, F.; Grydin, O.; Schaper, M.; Bach, Fr.-W.; Koszurkiewicz, B.; Milenin, A. (2010): Microstructure transformations in tempering steels during continuous cooling from hot forging temperaturesSteel Research Vol. 81, Nr. 3, S. 224-233, 2010.
  • Reich, A.; Schöne, O.; Keßler, O.; Grydin, O.; Nürnberger, F.; Nowak, M.; Schaper, M. (2010): Simulation of gas and spray quenching during extrusion of aluminium alloysKey Engineering Materials., Nr. 424, S. 57-64, 2010.
  • Frolov, I.; Gretzki, T.; Yu, Z.; Nürnberger, F.; Hassel, T.; Bach, Fr.-W. (2009): Surface Hardening Spline Geometries of Heat-Treatable Steel Cf53 using Water-Air Spray CoolingMaterials Working by Pressure - Collection of science papers Vol. 20, Nr. 1, S. 270-275, 2009.
  • Nürnberger, F.; Grydin, O.; Schaper, M.; Bach, Fr.-W.; Evertz, T.; Kluge, U. (2009): Isothermal Microstructural Transformations of the Heat-treatable Steel 42CrMo4 during Heat-treatment following Hot-formingSteel Research International Vol. 80, Nr. 12, S. 892-898, 2009.
  • Nürnberger, F.; Grydin, O.; Yu, Z.; Schaper, M.; Bach, Fr.-W. (2009): Simulation of Integrated Heat-treatment of Precision Forged ComponentsSteel Research International Vol. 80, Nr. 12, S. 899-905, 2009.
  • Nürnberger, F.; Rodman, D.; Grydin, O.; Diekamp, M.; Mozgova, I.; Bach, Fr.-W. (2009): Spray cooling of aluminium chassis framesSucasni problemy metalurhii Vol. 12, S. 92-99, 2009.
  • Nürnberger, F.; Schaper, M.; Bach, Fr.-W.; Mozgova, I.; Kuznetsov, K.; Halikova, A.; Perederieva, O. (2009): Prediction of continuous cooling diagrams for the precision forged tempering steel 50CrMo4 by means of artificial neural networksAdvances in Materials Science and Engineering, 2009.
  • Krause, C.; Wulf, F.; Nürnberger, F.; Bach, Fr.-W. (2008): Wärmeübergangs- und Tropfencharakteristik für eine Spraykühlung im Temperaturbereich von 900 °C bis 100 °CForschung im Ingenieurwesen Vol. 72, Nr. 3, S. 163-173, 2008.
  • Bach, Fr.-W.; Schaper, M.; Nürnberger, F.; Krause, C.; Broer, O. (2006): Simulation des Abschreckhärtens mittels Spraykühlung~- Wärmeübergang, Gefüge und HärteHTM Vol. 61, Nr. 3, S. 142-147, 2006.
  • Bach, Fr.-W.; Schaper, M.; Nürnberger, F.; Krause, C.; Grydin, O. (2006): Bestimmung der Streckgrenze und der Hall-Petch-Konstanten des Vergütungsstahles 42CrMo4 unterschiedlichen Gefügezustandes mittels EindruckprüfungenMaterialwissenschaft und Werkstofftechnik Vol. 37, Nr. 8, S. 668-673, 2006.
  • Krause, C.; Gretzki, T.; Nürnberger, F.; Schaper, M.; Bach, Fr.-W. (2006): Messung der Spraycharakteristik zur Bestimmung des Wärmeübergangskoeffizienten bei der SpraykühlungForschung im Ingenieurwesen, Springer Verlag Vol. 70, Nr. 4, S. 237-242, 2006.
  • Krause, C.; Scheer, C.; Nürnberger, F.; Reimche, W.; Bach, Fr.-W. (2006): Annealing of the edge-layer of precision forged gears of 42CrMo4 by a two-phase spray coolingVestnik NTUU KPI, Nr. 48, S. 33-36, 2006.
  • Nürnberger, F.; Broer, O.; Grydin, O.; Schäfer, M.; Schaper, M.; Behrens, B.-A. (2006): Simulation of the γ-grain size evolution during precision forging of helical gears made of tempering steel 42CrMo4Vestnik NTUU KPI, Nr. 48, S. 36-41, 2006.
  • Bach, Fr.-W.; Nürnberger, F.; Broer, O.; Schaper, M.; Grydin, O. (2005): Simulation of the microstructure transformation in quenched gears after precision forging of the tempering steel 42CrMo4Metallurgiceskaja i gornorudnaja promyvlennost' Vol. 232, Nr. 4, S. 48-51, 2005.
  • Bach, Fr.-W.; Nürnberger, F.; Krause, C. (2005): Außen hart und Innen weich - Randschichtvergüten durch Zweiphasensprayphi - Produktionstechnik Hannover informiert Vol. 6, Nr. 4, S. 10-11, 2005.
  • Bach, Fr.-W.; Nürnberger, F.; Philipp, K.; Schaper, M. (2005): Statistische Beschreibung der Tropfengrößenverteilung bei stationären Zerstäubungsprozessen.Forschung im Ingenieurwesen Vol. 69, Nr. 3, S. 181-186, 2005.

Konferenz

  • Barienti, K.; Wolf, A.-M.; Werwein, S.; Herbst, S.; Nürnberger, F. (2023): Kaltwalzpattieren unter XHV-adäquaten BedingungenTagungsband 5. Symposium Materialtechnik. Clausthal-Zellerfeld, 2023
    DOI: 10.21268/20230628-4
  • Barienti, K.; Nürnberger, F. (2022): Cold Roll Bonding under Oxygen-free ConditionsMSE 2022, Darmstadt, 27.09.2022-29.09.2022
  • Evers, P.; Gustav, M.; Jakubowitz, E.; Maier, H.J.; Nürnberger, F.; Reulbach, M.; Windhagen, H. (2022): In silico model of inductive heating for tissue-conserving hip and knee arthroplasty removalMSE 2022, Darmstadt, 27.09.2022-29.09.2022
  • Thürer, S. E.; Uhe, J.; Schäfke, F. P.; Heimes, N.; Nürnberger, F.; Behrens, B.-A.; Klose, C. (2022): Lateral Angular Co-Extrusion of Aluminum and Steel for the Manufacturing of Coaxial Composite ProfilesProceedings of the Twelfth International Aluminum Extrusion Technology Seminar (ET '22), May 3-5, Orlando, Florida 1, 2022, 183-193
  • Barienti, K.; Herbst, S.; Nürnberger, F. (2020): Kaltpressschweissen unter XHV-adäquater Atmosphäre beim WalzplattierenIn: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020, Posterbeitrag. TEWISS, Garbsen, 2020, S. 151
  • Behrens, B. A.; Diefenbach, J.; Chugreeva, A.; Kahra, C.; Herbst, S.; Nürnberger, F. (2020): Tailored Forming of Hybrid Bevel Gears with Integrated Heat TreatmentIn: 23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 301-308
    DOI: 10.1016/j.promfg.2020.04.234
  • Besserer, H.-B.; Herbst, S.; Nürnberger, F. (2020): Ermüdungsprüfung von blechmassivumgeformten BauteilenIn: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020. TEWISS, Garbsen, 2020, S. 100-104
  • Clausmeyer, T.; Gutknecht, F.; Gerstein, G.; Nürnberger, F. (2020): Testing of Formed Gear Wheels at Quasi-Static and Elevated Strain RatesIn: 23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 623-628
    DOI: 10.1016/j.promfg.2020.04.191
  • Demler, E.; Götze, S.; Herbst, S.; Nürnberger, F.; Maier, H. J.; Ursinus, J.; Büdenbender, C.; Behrens, B.-A. (2020): Casting Manufacturing of Cylindrical Preforms Made of Low Alloy SteelsIn: 23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 445-449
    DOI: 10.1016/j.promfg.2020.04.333
  • Gutknecht, F.; Gerstein, G.; Clausmeyer, T.; Nürnberger, F. (2020): Analyse der belastungspfadabhängigen Schädigungs- und Mikrostrukturentwicklung zur numerischen Auslegung von BlechmassivumformprozessenIn: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020, Posterbeitrag. TEWISS, Garbsen, 2020, S. 185-186
  • Kahra, C.; Herbst, S.; Nürnberger, F. (2020): Wärmebehandlung für belastungsangepasste Werkstoffeigenschaften von Tailored- Forming-KomponentenIn: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020, Posterbeitrag, TEWISS, Garbsen, 2020, S. 117-118
  • Wackenrohr, S.; Bongers, S.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Entwicklung und Analyse der duktilen Schädigung beim KaltgesenkwalzenIn: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020. TEWISS, Garbsen, 2020, 27-34
  • Acar, S.; Gerstein, G.; Nürnberger, F.; Cui, C.; Schulz, A.; Steinbacher, M.; Wunde, M.; Kurzynski, J. (2019): Deep Cryogenic Treatment of X153CrMoV12 Cold-work Tool SteelIn: Broeckmann, C. (Hrsg.): Tooling 2019 conference & exhibition. 13.05.-16.05.2019, P31
  • Acar, S.; Golovko, O.; Swider, M. A.; Nürnberger, F.; Siegmund, M.; Puppa, J.; Chugreev, A.; Behrens, B.-A. (2019): Influence of Increased Manganese Content on the Precipitation Behaviour of AISI H10 in Thermomechanical Fatigue TestsIn: WGP (Hrsg.): WGP Kongress 2019. Hamburg. 29.09.-02.10.2019, S. 189-197
  • Behrens, B.-A.; Puppa, J.; Acar, S.; Gerstein, G.; Nürnberger, F.; Lorenz, U. (2019): Development of an intelligent hot-working steel to increase the tool wear resistanceIn: Broeckmann, C. (Hrsg.): Tooling 2019 conference & exhibition. 13.05.-16.05.2019, P64
  • Clausmeyer, T.; Nürnberger, F.; Gutknecht, F.; Isik, K.; Besserer, H.-B.; Gerstein, G.; Wernicke, S.; Schulte, R.; Tekkaya, A.E.; Merklein, M.; Maier, H.J. (2019): Analyse und Modellierung von Schädigung und Versagen in der BlechmassivumformungIn: Merklein, M.; Behrens, B.-A.; Tekkaya, A.E. (Hrsg.): 4. Workshop Blechmassivumformung. Hannover, 12.03.2019. FAU University Press, Erlangen, 2019, S. 33-60
    DOI: 10.25593/978-3-96147-280-2
  • Ursinus, J.; Bonhage, M.; Büdenbender, C.; Nürnberger, F.; Demler, E.; Behrens, B.-A. (2019): Hot Forming of Cast Steel CylindersIn: Conference Proceedings of the 28th International Conference on Metallurgy and Materials, METAL2019. Brno, Czech Rep. 22.05.-24.05., 2019
  • Gerstein, G.; Briukhanov, A.; Gutknecht, F.; Volchok, N.; Clausmeyer, T.; Nürnberger, F.; Tekkaya, A. E.; Maier, H. J. (2018): Evaluation of micro-damage by acoustic methodsIn: 17th International Conference on Metal Forming. Metal Forming 2018. Toyohashi, Japan, 16.09. - 19.09.2018, Procedia Manufacturing 15, 2018, S. 527-534
    DOI: 10.1016/j.promfg.2018.07.273
  • Golovko, O. M.; Frolov, Y. V.; Andreiev, V. V.; Klose, C.; Nürnberger F. (2018): Manufacturing of seamless tubes of the alloy Al-5Mg-0,2Sc by direct extrusion and sink drawingIn: Materials Science and Engineering, MSE 2018. European Congress and Exhibition on Advanced Materials and Processes. Darmstadt. 26-28.09.2018
  • Gutknecht, F.; Gerstein, G.; Traphöner, H.; Clausmeyer, T.; Nürnberger, F. (2018): Experimental setup to characterize flow-induced anisotropy of sheet metalsIn: IOP Conf. Series: Materials Science and Engineering 418. International Deep Drawing Research Group 37th Annual Conference. Waterloo, Kanada. 03.06.-07.06.2018, S. 12085
    DOI: 10.1088/1757-899X/418/1/012085
  • Herbst, S.; Nürnberger, F. (2018): Chracterization of Heat Transfer in Complex Air-Water Spray Quenching Set-UpsIn: QDE2018, International Conference on Quenching and Distortion Engineering. Nagoya, Japan, 27.11.-29.11.2018, S. 21
  • Hordych, I.; Bild, K.; Boiarkin, V.; Rodman, D.; Nürnberger, F. (2018): Phase transformations in a boron-alloyed steel at high heating ratesIn: Mori, K.-I.; Abe, Y.; Maeno, T. (Hrsg.): Proceedings of the 17th International Conference on Metal Forming. Metal Forming 2018. Toyohashi, Japan. 16.09. - 19.09.2018, Procedia Manufacturing 15, 2018, S. 1062-1070
    DOI: 10.1016/j.promfg.2018.07.386
  • Hordych, I.; Rodman, D.; Nürnberger, F.; Schmidt, H. C.; Orive, A. G.; Homberg, W.; Grundmeier, G.; Maier, H. J. (2018): Influence of heat-pretreatments on the microstructural and mechanical properties of galfan-coated metal bondsIn: Fratini, L. et al. (Hrsg.): Proceedings of the 21st International ESAFORM Conference on Material Forming. ESAFORM 2018. Palermo. AIP Conference Proceedings 1960, 2018 (1), S. 40007
    DOI: 10.1063/1.5034861
  • Siegmund, M.; Golovko, O.; Puppa, J.; Chugreev, A.; Nürnberger, F.; Behrens, B. A. (2018): Effect of Manganese on Nitriding and Softening Behaviour of Steel AISI H10 Under Cyclic Thermal LoadsIn: Schmitt, R.; Schuh, G. (Hrsg.): Advances in Production Research. WGP 2018. Aachen. 19.11.-20.11.2018, S. 423-432
    DOI: 10.1007/978-3-030-03451-1_42
  • Besserer, H.-B.; Rodman, D.; Nürnberger, F. (2017): Ermüdungsverhalten blechmassivumgeformter BauteileIn: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 221
  • Boiarkin, V. V.; Nürnberger, F.; Ashkelyanets, A. V.; Golovko, O.; Hordych, I.; Rodman, D.; Remez, O. A. (2017): Modernization Of An Electric-Weld Plant For Performing Combined Roll Forming And Heat-Treatment ProcessesIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, Seite 28
  • Demler, E., Gerstein, G., Dalinger A., Epishin, A., Nürnberger, F., Maier, H. J. (2017): Influence of high-current-density impulses on the plasticity of single crystal nickel-based super alloy CMSX-4In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 47
  • Demler, E.; Gerstein, G.; Dalinger, A.; Nürnberger, F.; Molodov, D. A.; Epishin, A. (2017): Methodical procedure for investigating the influence of electric impulses on the deformation behavior of the single crystal nickel-based alloy CMSX-4 and dynamics of grain boundaries in aluminum bicrystalsIn: Bannykh, O. A. (Hrsg.): VII international conference „Deformation and destruction of materials and nanomaterials“. Moskau. 7.-10.11.2017. IMET RAN, Moskau, 2017, S. 57-58
  • Frolov Ya., Nürnberger F., Wolf L., Golovko O. (2017): Water-Air Spray Cooling At Heat Treatment Of Cylindrical SamplesIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 13
  • Gerstein, G.; Clausmeyer, T.; Gutknecht, F.; Tekkaya, A. E.; Nürnberger, F. (2017): Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths. In: The Minerals, Metals & Materials Society TMS (Hrsg.): TMS 2017. 146th Annual Meeting & Exhibition Supplemental Proceedings. Springer, Cham, Switzerland, 2017, S. 203-210
    DOI: 10.1007/978-3-319-51493-2_20
  • Golovko, O.; Puppa, J.; Paschke, H.; Nürnberger, F.; Rodman, D.; Maier, H. J.; Behrens, B.-A. (2017): Properties Of An Intelligent Hot-Working Tool Steel With Alloy Adapted Nitriding LayersIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 49
  • Grydin, O.; Nürnberger, F.; Schaper, M. (2017): Influence of Sticking on the Roll Topography at Twin-Roll Casting of Aluminum Alloys.In: Ratvik, A. P. (Hrsg.): Light metals 2017, The Minerals, Metals & Materials Society (TMS). San Diego. 26.02. - 02.03.17. Springer, Cham, Switzerland, 2017, S. 827-831
    DOI: 10.1007/978-3-319-51541-0_100
  • Gutknecht, F.; Isik, K.; Clausmeyer, T.; Tekkaya, A. E.; Gerstein, G.; Nürnberger, F. (2017): Vorhersage von Schädigung in der BlechmassivumformungIn: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 220
  • Herbst, S.; Nürnberger, F. (2017): Heat Treatment of Steel-Aluminum Hybrid ComponentsIn: Materials Science and Technology 2017. Pittsburgh, 08.-12.10.2017, S. 53-60
    DOI: 10.7449/2017/MST_2017_53_60
  • Herbst, S.; Nürnberger, F. (2017): Heat Treatment of Steel-Aluminium Tailored Forming-ComponentsIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 48
  • Herbst, S.; Nürnberger, F. (2017): Wärmebehandlung für belastungsangepasste Werkstoffeigenschaften von Tailored Forming-KomponentenIn: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 193
  • Hordych, I.; Boiarkin, V.; Rodman, D.; Nürnberger, F. (2017): Manufacturing of tailored tubes with a process integrated heat treatmentIn: Brabazon, D.; Naher, S.; Ahad, I. U. (Hrsg.): Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. 26-28 April 2017, Dublin, Ireland. AIP Publishing LLC, Melville, New York, 2017, S. 190003
    DOI: 10.1063/1.5008216
  • Hordych, I.; Hoppe, C.; Nürnberger, F.; Grundmeier, G.; Schmidt, H. C.; Homberg, W.; Rodman, D.; Rodman, M. (2017): Heat-Treatment Of Coated Steel Sheets Before And After A Cold Roll Bonding ProcessIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 48
  • Nürnberger, F.; Gretzki, T.; Wolf, L.; Frolov, Y.; Golovko, O. (2017): Changes of the metal temperature at the axial water-air cooling of cylindrical samplesIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 32-38
  • Nürnberger, F.; Gretzki, T.; Wolf, L.; Frolov, Y.; Golovko, O. (2017): Change of metal temperature at heat treatment with water-air spray coolingIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 27-31
  • Reschka, S.; Munk, L.; Rodman, D.; Nürnberger, F. (2017): Data acquisition for stress analysis by Digital Image Correlation of nickel-based superalloys under tensile load at high temperaturesIn: Creep 2017. Proceedings of the International Conference on Creep and Fracture of Engineering Materials and Structures. Sankt Petersburg, 19.06.-21.06.2017, S. 38
  • Rodman, D.; Demler, E.; Rodman, M.; Gerstein, G.; Briukhanov, A. A.; Grydin, O.; Klose, C.; Nürnberger, F. (2017): Investigation Of The Sign-Variable Low-Cyclic Bending Deformation Influence On Sheet Properties Of Materials With A Hexagonal Crystal LatticeIn: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, Seite 47
  • Wolf, L. O.; Rodman, D.; Nürnberger, F.; Cordebois, J.-P.; Maier, H. J. (2017): Intercritical Annealing – New Heat Treatment Strategies for Tailoring the Stress-Strain Behavior of 22MnB5In: Oldenburg, M.; Prakash, B.; Steinhoff, K. (Hrsg.): Hot Sheet Metal Forming of High-Performance Steel CHS2. 6th International Conference, 4-7 June 2017, Atlanta, GA., USA. Verlag Wissenschaftliche Scripten, Auerbach, 2017, S. 433-440
  • Gerstein, G.; Nürnberger, F.; Maier, H. J. (2016): Evolution of void shape anisotropy in deformed bcc steelsIn: 145. TMS Annual Meeting & Exhebition, Proceedings of the Epd Congress 2016. John Wiley & Sons, Inc., Hoboken, New Jersey, 2016, S. 173-179
  • Golovko, O.; Puppa, J.; Nürnberger, F.; Rodman, D.; Maier, H. J.; Behrens, B.-A. (2016): Development of intelligent hot forging tools with increased wear resistance by cyclic edge-zone hardeningIn: Proceedings of the 10th TOOL Conference 2016. Bratislava, Slowakei. 04.10. - 07.10.2016, S. 316-325
  • Lachmayer, R.; Zghair, Y. A.; Klose, C.; Nürnberger, F. (2016): Introducing Selective Laser Melting to Manufacture Machine ElementsIn: Marjanović, D. et al. (Hrsg.): Proceedings of the DESIGN 2016 14th International Design Conference. Dubrovnik, Croatia. 16.05.-19.05.2016, S. 831-842
  • Wolf, L.; Nürnberger, F.; Rodman, D.; Boiarkin, V.; Maier, H. J. (2016): Manufacturing of multiphase steel with adapted material propertiesIn: Special Workshop Multiscale Modeling of Heterogeneous Structures. 21.-23. Sept. 2016, Dubrovnik, Kroatien
  • Wolf, L.; Rodman, D.; Maier, H. J.; Nürnberger, F. (2016): Adapted multi-phase microstructures by intercritical annealing and press hardeningIn: Furuhara, T.; Nishida, M.; Miura S. (Hrsg.): The Ninth Pacific Rim International Conference on Advanced Materials and Processing (PRICM9). Kyoto, Japan. 01.-05. Aug. 2016. Wiley-VCH, 2016, S. 295-298
  • Behrens, B.-A.; Maier, H. J.; Nürnberger, F.; Schrödter, J.; Moritz, J.; Wolf, L.; Gaebel C. M. (2015): Hot forming and subsequent cooling outside the press for adjusted tailored properties of 22MnB5 steel sheetsIn: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Hg.): Hot Sheet Metal Forming of High Performance Steel. 5th International Conference Proceedings CHS2. Verl. Wiss. Scripten, Auerbach; S. 35-44.
    ISBN: 978-3-95735-023-7
  • Gerstein, G.; Besserer, H.-B.; Jablonik, L.; Dalinger, A.; Nürnberger, F.; Höpner, A. (2015): Präparation plastisch umgeformter Stahlproben durch Ionenstrahlbearbeitung für die Untersuchung von duktiler SchädigungIn: Petzow, W. (Hg.): Fortschritte in der Metallographie. Berichte der 49. Metallographie-Tagung Dresden, 16. bis 18. September 2015; S. 153–158
    ISBN: 978-3-88355-410-5
  • Gerstein, G.; Besserer, H.-B.; Nürnberger, F.; Maier, H. J. (2015): Comparsion of the mechanisms of void formation by plastic deformation in single- and dual-phase bcc-steelsProceedings of the TMS 2015 Annual Meeting 2015, Characterization of minerals, metals, and materials, Orlando, Florida, 15.-19.03.2015. Hoboken, New Jersey: John Wiley & Sons, Inc, S. 75–81
    DOI: 10.1002/9781119093404.ch9
    ISBN: 978-1-119-08246-0
  • Herbst, S.; Steinke, K. -F; Maier, H. J.; Milenin, A.; Nürnberger, F. (2015): Determination of heat transfer coefficients for complex spray cooling arrangementsIn: Zoch, H.-W.; Lübben, T. (Hg.): Proceedings of the 5th International Conference on Distortion Engineering, 2015; S. 247–256
  • Maier, H. J.; Behrens, B. A.; Wolf, L.; Moritz, J.; Neumann, A.; Diekamp, M.; Gretzki, T.; Rodman, D.; Schrödter, J.; Spiekermeier, S.; Hübner, S.; Nürnberger, F. (2015): Formhärten und Spraykühlung – Potenziale und AnwendungsmöglichkeitenIn: Merklein, M. (Hrsg.): 10. Erlanger Workshop Warmblechumformung 2015. Meisenbach GmbH-Verlag, Bamberg, 2015, S. 59-78
  • Zeller, S.; Beese, S.; Gerstein, G.; Isik, K.; Löhnert, S.; Nürnberger, F.; Wriggers, P.; Maier, H. J.; Tekkaya, A. E. (2015): Möglichkeiten der simulativen Vorhersage von Temperaturentwicklung und Bauteilversagen infolge plastischer Deformation bei DP600 BauteilenTekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Hg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, Dortmund, 26. - 27. Februar. Aachen: Shaker Verlag, S. 113–128
  • Grydin, O.; Stolbchenko, M.; Nürnberger, F.; Schaper, M. (2014): Influence of the twin-roll casting parameters on the microsegregation in thin strips of the aluminium alloy EN AW-6082Wiley, TMS, 2014, Light Metals 2014, P. 411-414 Weitere Informationen
  • Merklein, M.; Schneider, T.; Gröbel, D.; Nürnberger, F. (2014): Blechmassivumformung - vom Halbzeug zum FunktionsbauteilBehrens, B. A. (Hg.): 21. Umformtechnisches Kolloquium Hannover, Industrie und Wissenschaft – Gemeinsam die Zukunft gestalten, 2014; S. 265-280
  • Nürnberger, F.; Diekamp, M.; Moritz, J.; Wolf, L.; Hübner, S.; Behrens, B.-A. (2014): Spray Cooling of Early Extracted Hot Stamped PartsTMS 2014, 143. Annual Meeting Supplemental Proceedings, John Wiley & Sons, Inc., Hoboken, NJ, 16.–20.02.2014, in San Diego, California USA Weitere Informationen
    DOI: 10.1002/9781118889879.ch116
    ISBN: 9781118889879
  • Striewe, B.; Hehl, A. v.; Grittner, N.; Schaper, M.; Nürnberger, F. (2014): Heat Treatment of Aluminum-Titanium-Compounds Made by Co-Extrusion and Friction WeldingAluminium Alloys 2014 - ICAA14, Materials Science Forum, 794-796, S. 839–844
    DOI: 10.4028/www.scientific.net/MSF.794-796.839
  • Behrens, B.- A.; Bach, Fr.-W.; Diekamp, M.; Hübner, S.; Nürnberger, F.; Schrödter, J.; Wolf, L.; Moritz, J. (2013): Process Time Reduction of Hot Stamping by Means of Early Extraction from the PressIn: Mats Oldenburg und Kurt Steinhoff (Hg.): Proceedings / 4th International Conference Hot Sheet Metal Forming of High Performance Steel. June 9 - 12, 2013, Luleå, Sweden. Auerbach: Verl. Wiss. Scripten (CHS 2 series, 4), S. 259-266 (8).
  • Faßmann, D.; Isik, K.; Zeller, S.; Beese, S.; Ben Khalifa, N.; Nürnberger, F.; Schaper, M.; Tekkaya, A. E.; Löhnert, S.; Wriggers, P. (2013): Abbildung des Werkstoffverhaltens von ferritischem Stahl in numerischen Modellen zur Darstellung von Blechmassivumformprozessen bei zyklischen BelastungspfadenIn: M. Merklein, B.- A. Behrens und A. E. Tekkaya (Hg.): 2. Workshop Blechmassivumformung. Umformtechnische Herstellung von komplexen Funktionsbauteilen mit Nebenformelementen aus Feinblechen - Blechmassivumformung -. Erlangen, 13.11.2013. DFG Sonderforschungsbereich TR 73. Bamberg: Meisenbach GmbH-Verlag, S. 69–84.
  • Wolf, L.; Moritz, J.; Diekamp, M.; Schrödter, J.; Nürnberger, F.; Hübner, S.; Bach, Fr.-W.; Behrens, B.- A.; Sunderkötter, C.; Marusch H.-E. (2013): Partielles Vergüten mittels verkürztem Formhärteprozess und nachgeschalteter SpraykühlungIn: M. Merklein (Hg.): 8. Erlanger Workshop Warmblechumformung. Bamberg, Germany: Meisenbach GmbH-Verlag, S. 65–84.
  • Grydin, O.; Nürnberger, F.; Schaper, M.; Cwiekalla, T.; Brosius, A.; Tekkaya, A.E; Barthel, C.; Svendsen, B. (2012): Distortion analysis of air hardened deep drawn parts of the air-hardened steel LH800In: D.S MacKenzie (Hg.): Quenching Control and Distortion. Proceedings of the 6th International Quenching and Control of Distortion Confer-ence including the 4th International Distortion Engineering Conference. ASM International. Materials Park, Ohio 44073-0002: ASM International, S. 829–838.
  • Schaper, M.; Golovko, O.; Nürnberger, F. (2012): Implementation of Heat Treatment into the Aluminum Extrusion ProcessMaterials Science & Technology 2012. ACerS, AIST ASM TMS NACE. Pittsburgh, Pennsylvania, USA, 07.10.2012
  • Bach, Fr.-W.; Schaper, M.; Yu, Z.; Nürnberger, F.; Gretzki, T.; Rodman, D.; Springer, R. (2010): Computation of the Isothermal Transformation Diagrams of 42CrMo4 Steel from Dilatometer Measurements with Continuous Cooling{Conf. Proc.}. Shanghai, China, 31.03.-02.06. 2010.
  • Gershteyn, G.; Jablonik, L.; Nürnberger, F.; Schaper, M.; Kneissl, A. (Hrsg.) (2010): Einfluss von Umformung und Abkühlung auf die Mikrostruktur des presshärtbaren Stahles 22MnB5Fortschritte in der Metallographie Sonderbände der praktischen Metallographie Vol. 42, S. 69-74. Frankfurt: MAT-INFO Werkstoff-Informationsges., 2010.
    ISBN: 9783883553825
  • Schaper, M.; Gershteyn, G.; Grydin, O.; Fassmann, D.; Yu, Z.; Nürnberger, F. (2010): Modellierung des Werkstoffverhaltens beim Warmumformen höchstfester Stähle auf der Basis mikrostruktureller VorgängeMerklein (Hg.) – Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 5. Erlanger Workshop Warmblechumformung, S. 141-160. Bamberg: Meisenbach GmbH-Verlag, 2010.
    ISBN: 978-3-87525-311-5
  • Yu, Z.; Nürnberger, F.; Gretzki, T.; Schaper, M.; Bach, Fr.-W.; CADFEM (Hrsg.) (2010): Simulation der Eigenspannungsentwicklung beim Abschrecken von Ritzelwellen aus 42CrMo4 mittels SpraykühlungANSYS Conference & 28th CADFEM Users' Meeting 2010, 2010.
  • Nowak, M.; Grydin, O.; Nürnberger, F.; Schaper, M.; CADFEM (Hrsg.) (2009): Modellierung einer prozessintegrierten Spraykühlung beim Strangpressen von aushärtbaren AluminiumlegierungenANSYS Conference & 27th CADFEM Users' Meeting. 18.-20.11.2009 Congress Center Leipzig
  • Yu, Z.; Nürnberger, F.; Gretzki, T.; Schaper, M.; Bach, Fr.-W. (2009): Simulation of microstructure and residual stress development in cylinders of AISI 4140 during quenching by spray cooling and following temperingMaterials Science & Technology Conference and Exhibition 2009 Vol. 4, S. 2422-2433. Red Hook, NY: Curran, 2009.
    ISBN: 978-161567636-1
  • Nürnberger, F.; Yu, Z.; Wilkening, L.; Grydin, O.; Schaper, M.; Bach, Fr.-W.; CADFEM (Hrsg.) (2008): Simulation der Eigenspannungsentwicklung beim Abschrecken von Zylindern aus 42CrMo4 mittels SpraykühlungANSYS Conference & 26th CADFEM Users' Meeting, 2008.
  • Grydin, O.; Nürnberger, F.; Schaper, M.; Bach, Fr.-W. (2007): Mathematical model for simulation of steel behavior during integrated heat treatment on the base of software ANSYSComputational Mechanics & Enhancement and Promotion of Computational Methods in Engineering and Science. Kyoto, Japan, 3.-6.12.2007.
  • Grydin, O.; Nürnberger, F.; Schaper, M. (2006): Matematiceskaja model' prognozirovanija struktury i mechaniceskich svojstv stali posle gorjacej deformacii i termoobrabotkiUdoskonalennja Procesiv i Obladnannja Obrobky Tyskom v Metalurhiï I Mašynobuduvanni. Tematyčnyj zbirnyk naukovych prac'. Donbas'ka deržavna mašynobudivna akademija. Kramators'k, S. 36–41
    ISBN: 966-379-070-9
  • Bach, Fr.-W.; Nürnberger, F.; Krause, Ch.; Schaper, M.; Grydin, O. (2005): Simulation von Gefügeumwandlungen beim Abschreckhärten aus der Schmiedewärme mittels ZweiphasenströmungUniv.-Prof. Dr.-Ing. habil. B. Wielage (Hg.): Neue Materialien und Verfahren in der Beschichtungstechnik. Tagungsband zum 8. Werkstofftechnischen Kolloquium in Chemnitz. 29.-30.09.2005. TU Chemnitz, Fakultät für Maschinenbau, Lehrstuhl für Verbundwerkstoffe. Chemnitz: Eigenverlag (Werkstoffe und Werkstofftechnische Anwendungen, 22), S. 117–122
  • Bach, Fr.-W.; Schaper, M.; Krause, Ch.; Nürnberger, F. (2005): Heat treatment of precision forged steel gears by usage of the forging heatSučasni problemy metalurhiï. Naukovi visti. Plastyčna deformacija metaliv. Nacional'na metalurhijna akademija Ukraïny. Dnipropetrovs'k (8), S. 488–493
  • Bach, Fr.-W.; Schaper, M.; Nürnberger, F.; Grydin, O. (2005): Simulation of the microstructure transformation during quenchingSučasni problemy metalurhiï. Naukovi visti. Plastyčna deformacija metaliv. Nacional'na metalurhijna akademija Ukraïny. Dnipropetrovs'k (8), S. 27–31
  • Böhm, R.; Nürnberger, F.; Rodman, M.; Weber, J. (2003): Thermographische Analyse beim Walzen von Magnesiumblechen11. Magnesium Abnehmerseminar ; 26./26. September 2003 in Aalen &. 11th Magnesium Automotive and End User Seminar. Europäische Forschungsgemeinschaft Magnesiumguss. Aalen, S. 18.0-18.5
    ISBN: 3-932291-36-0
  • Bratutin, W.; Nürnberger, F. (2002): Analysis of changing material properties of low carbon steel wire St1Kp after heat treatment and bendingSučasni problemy metalurhiï. Naukovi visti. Plastyčna deformacija metaliv. Nacional'na metalurhijna akademija Ukraïny. Dnipropetrovs'k (5), S. 377–382

Beiträge in Büchern

  • Sheveleva, T.; Herrmann, K.; Wawer, M. L.; Kahra, C.; Nürnberger, F.; Koepler, O.; Mozgova, I.; Lachmayer, R.; Auer, S. (2023): Ontology-Based Documentation of Quality Assurance Measures Using the Example of a Visual InspectionIn: Valle, M. et al. (Hrsg.): Advances in System-Integrated Intelligence. Springer International Publishing, Cham, 2023, S. 415-424
  • Besserer, H.-B.; Nürnberger, F.; Maier, H. J. (2021): Fatigue Behavior of Sheet-Bulk Metal Formed ComponentsIn: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Hrsg.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020. Springer, Cham, 2021, S. 412-433
    DOI: 10.1007/978-3-030-61902-2_18
  • Gutknecht, F.; Gerstein, G.; Isik, K.; Tekkaya, A. E.; Maier, H. J.; Clausmeyer, T.; Nürnberger, F. (2021): Analysis of Path-Dependent Damage and Microstructure Evolution for Numerical Analysis of Sheet-Bulk Metal Forming ProcessesIn: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Hrsg.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020. Springer, Cham, 2021, S. 378-411
    DOI: 10.1007/978-3-030-61902-2_17
  • Wackenrohr, S.; Nürnberger, F.; Maier, H. J. (2021): Fatigue Life Compliant Process Design for the Manufacturing of Cold Die Rolled ComponentsIn: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Hrsg.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020. Springer, Cham, 2021, S. 568-585
    DOI: 10.1007/978-3-030-61902-2_26
  • Hordych, I.; Herbst, S.; Nürnberger, F.; Boiarkin, V.; Hubert, O.; Maier, H. J. (2020): Manufacturing and Virtual Design to Tailor the Properties of Boron-Alloyed Steel TubesIn: Wriggers, P.; Allix, O.; Weissenfels, C. (Hrsg.): Virtual Design and Validation. Lecture Notes in Applied and Computational Mechanics 93. Springer, Cham, 2020, S. 21-44
  • Wolf, L.; Diekamp, M.; Gretzki, T.; Nürnberger, F.; Bach, F.-W.; Rodman, D.; Moritz, J.; Schrödter, J.; Hübner, S.; Behrens, B. -A (2014): Hot Stamping and subsequent spray cooling: A new manufacturing approachProf. O. N. Golovko, Plastic Deformation of Metals, 2014, Akzent PP, Dnipropetrovsk, S. 36-55
    ISBN: 978-617-7109-18-0
  • Yu, Z.; Gretzki, T.; Nürnberger, F.; Kästner, M.; Haskamp, K.; Bach, F.-W.; Schaper, M.; Hassel, T. (2014): WärmebehandlungBach, Fr.-W.; Kerber, K. (Hg.): Prozesskette Präzisionsschmieden, Springer-Verlag Berlin Heidelberg, S. 127–220