Publikationen

Behrens B.-A., Yilkiran, D.; Schöler, S.; Hübner, S.; Möhwald, K.; Özkaya, F. (2019): Dry sheet metal forming through selective oxidized tool surfaces,  In: TMS 2019, 148th Annual Meeting. San Antonio, USA. 10.03.-14.03.2019, S. 719-731
DOI: 10.1007/978-3-030-05861-6_71

Strauß, C.; Wegewitz, L.; Gustus, R.; Maus-Friedrichs, W.; Schöler, S.; Holländer, U.; Möhwald, K. (2019): Surface deoxidation mechanisms of stainless steels in vacuum brazing processes,  In: Brazing, high temperature brazing and diffusion bonding - LÖT 2019. Aachen, 21.05.-23.05.2019. DVS Media, Düsseldorf, 2019, S. 247-251

Behrens, B.-A.; Yilkiran, D.; Schöler, S.; Özkaya, F.; Hübner, S.; Möhwald, K. (2018): Wear investigation of selective α-Fe2O3 oxide layers generated on surfaces for dry sheet metal forming,  In: 17th International Conference on Metal Forming. Toyohashi, Japan. 16.09.-19.09.2018, S. 923-930
DOI: 10.1016/j.promfg.2018.07.404

Schöler, S.; Yilkiran, D.; Wulff, D.; Özkaya, F.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2018): Selective oxidation of tool steel surfaces under a protective gas atmosphere using inductive heat treatment,  In: Vollertsen, F. et al. (Hrsg.): 5th International Conference on New Forming Technology, ICNFT 2018. Bremen, 18.09.-21.09.18. MATEC Web Conf. 190, 2018, S. 14003
DOI: 10.1051/matecconf/201819014003

C. Kunz, M. Marschewski, W. Maus-Friedrichs, S. Schöler, U. Holländer, K. Möhwald (2016): Mechanisms of surface deoxidation of stainless steels in vacuum brazing processes,  In: DVS (Hrsg.): Brazing, high temperature brazing and diffusion bonding - LÖT 2016. Aachen, 07.06. - 09.06.2016. DVS Media, 2016, S. 181-185

S. Schöler, E. Marin Zimmermann, K. Möhwald, C. Kunz, W. Maus-Friedrichs (2016): Construction of an experimental set-up for brazing stainless steel samples in low vacuum atmosphere consisting monosilane-doped argon,  In: DVS (Hrsg.): Brazing, high temperature brazing and diffusion bonding - LÖT 2016. Aachen, 07.06. - 09.06.2016. DVS Media, 2016, S. 311-315

Schöler, S.; Langohr, A.; Özkaya, F.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2021): Investigations of hot-dip galvanized dual-phase steel (DP600+Z) sheet metal on selectively oxidized tool steel surfaces under dry deep-drawing conditions,  Wear XII, 2021, 203742
DOI: 10.1016/j.wear.2021.203742

Schöler, S.; Kock, C.; Özkaya, F.; Nowak, C.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2020): Numerical Simulation of the Abrasive Wear Behavior of Selectively Oxidized α-Fe2O3 Oxide Layers on Tool Steel Surfaces,  JOM 72, 2020 (7), 2536-2547
DOI: 10.1007/s11837-020-04172-x

Schöler, S.; Schmieding, M.; Heimes, N.; Pape, F.; Behrens, B.-A.; Poll, G.; Möhwald, K. (2020): Characterization of Molybdenum Based Coatings on 100Cr6 Bearing Steel Surfaces,  Tribology Online 15, 2020 (3), 181-185
DOI: 10.2474/trol.15.181

Özkaya, F.; Schöler, S.; Kock, C.; Hübner, S.; Behrens, B.-A. (2019): Development of a tool concept with selectively oxidised inserts for dry deep drawing,  Dry Met. Forming OAJ FMT 5, 2019, 46-49

Schöler, S.; Schmieding, M.; Yilkiran, D.; Özkaya, F.; Nowak, C.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2019): Wear behavior of selectively oxidized α-Fe2O3 oxide low-friction layer systems on PM tool steel surfaces,  Wear 426-427, 2019, 1603-1615
DOI: 10.1016/j.wear.2019.01.009

Strauß, C.; Gustus, R.; Maus-Friedrichs, W.; Schöler, S.; Holländer, U.; Möhwald, K. (2019): Influence of atmosphere during vacuum heat treatment of stainless steels AISI 304 and 446,  Journal of Materials Processing Technology 264, 2019, 1-9
DOI: 10.1016/j.jmatprotec.2018.08.038

Schöler, S.; Wulff, D.; Yilkiran, D.; Behrens, B.-A. (2018): Inductive heat treatment as an alternative tempering method for the selective oxidation of 1.2379 tool steel surfaces,  Dry Met. Forming OAJ FMT 4, 2018, 13-17

Strauß, C.; Gustus, R.; Maus-Friedrichs, W.; Schöler, S.; Holländer, U.; Möhwald, K. (2018): Influence of atmosphere during vacuum heat treatment of stainless steels AISI 304 and 446,  Journal of Materials Processing Technology 264, 2019, 1-9
DOI: 10.1016/j.jmatprotec.2018.08.038

Almohallami, A.; Arghavani, M.; Böhmermann, F.; Freiße, H.; Herrmann, M.; Mousavi, S. A.; Schöler, S.; Scholz, P.; Tenner, J.; Teller, M.; Umlauf, G.; Wulff, D.; Yilkiran, D.; Maier, H. J. (2017): How dry is dry? - A critical analysis of surface conditions used in dry metal forming,  Dry Met. Forming OAJ FMT 3, 2017, 90-94