Publikationen

Beiträge in Büchern

  • Heimes, N.; Uhe, J.; Thürer, S. E.; Wester, H.; Maier, H. J.; Klose, C.; Behrens, B.-A. (2021): Numerical Development of a Tooling System for the Co-extrusion of Asymmetric Compound Profiles on a Laboratory ScaleIn: Behrens, B.-A. et al. (Hrsg.): Production at the leading edge of technology. WGP2020, Dresden, 23.09.-24.09.2020. Springer, Berlin, 2021, S. 66-75
    DOI: 10.1007/978-3-662-62138-7_7

Konferenz

  • Schäfke, F. P.; Engelhardt, M.; Grittner, N.; Thürer, S. E.; Klose, C. (2022): The ECARP Process and Its Influence on the Microstructure of Pure Mg and the Mg Alloy AZ31Proceedings of the Twelfth International Aluminum Extrusion Technology Seminar (ET '22), May 3-5, Orlando, Florida 1, 2022, 723-731
  • Thürer, S. E.; Uhe, J.; Schäfke, F. P.; Heimes, N.; Nürnberger, F.; Behrens, B.-A.; Klose, C. (2022): Lateral Angular Co-Extrusion of Aluminum and Steel for the Manufacturing of Coaxial Composite ProfilesProceedings of the Twelfth International Aluminum Extrusion Technology Seminar (ET '22), May 3-5, Orlando, Florida 1, 2022, 183-193
  • Behrens, B.-A.; Uhe, J.; Thürer, S. E.; Klose, C.; Heimes, N. (2020): Development of a Modified Tool System for Lateral Angular Co-Extrusion to Improve the Quality of Hybrid ProfilesIn: 23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 224–230
    DOI: 10.1016/j.promfg.2020.04.200
  • Thürer, S. E.; Heimes, N.; Uhe, J.; Behrens, B.-A.; Klose, C. (2020): Herstellung koaxialer Verbundprofile mittels Lateral Angular Co-ExtrusionIn: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020, Posterbeitrag, TEWISS, Garbsen, 2020, S. 115-116
  • Behrens, B.-A.; Klose, C.; Thürer, S.; Heimes, N.; Uhe, J. (2019): Numerical modeling of the development of intermetallic layers between aluminium and steel during co-extrusionIn: Lander Galdos, L. et al. (Hrsg.): Proceedings of the 22nd international ESAFORM conference on material forming: ESAFORM 2019. Vitoria-Gasteiz, Spanien. 08.05. – 10.05.2019, S. 40029
    DOI: 10.1063/1.5112563
  • Behrens, B.-A.; Sokolinskaja, V.; Chugreeva, A.; Diefenbach, J.; Thürer, S.; Bohr, D. (2019): Investigation into the bond strength of the joining zone of compound forged hybrid aluminium-steel bearing bushingIn: Lander Galdos, L. et al. (Hrsg.): Proceedings of the 22nd international ESAFORM conference on material forming: ESAFORM 2019. Vitoria-Gasteiz, Spanien. 08.05. – 10.05.2019, S. 40028
    DOI: 10.1063/1.5112562
  • Pape, F.; Coors, T.; Chugreev, A.; Matthias, T.; Uhe, J.; Thürer, S.; Klose, C.; Behrens, B.-A. (2019): Ultrasonic evaluation of tailored forming bearing componentsIn: 12th International Symposium on Rolling Bearing Steels – Progress in Bearing Steel Metallurgical Testing and Quality Assurance. Denver. 15.05.-17.05.2019
    DOI: 10.13140/RG.2.2.28034.53443
  • Behrens, B.-A.; Klose, C.; Chugreev, A.; Thürer, S. E.; Uhe, J. (2018): Numerical investigations on the lateral angular co-extrusion of aluminium and steelIn: Fratini, L. et al. (Hrsg.): Proceedings of the 21st International ESAFORM Conference on Material Forming. ESAFORM 2018. Palermo. AIP Conference Proceedings 1960, 2018 (1), S. 30001
    DOI: 10.1063/1.5034844
  • Behrens, B.-A.; Bouguecha, A.; Moritz, J.; Bonk, C.; Stonis, M.; Klose, C.; Blohm, T.; Chugreeva, A.; Duran, D.; Matthias, T.; Golovko, O.; Thürer, S. E.; Uhe, J. (2017): Aktuelle Forschungsschwerpunkte in der MassivumformungIn: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017. TEWISS, Garbsen, 2017, S. 15-32
  • Thürer, S. E.; Golovko, O.; Bonk, C.; Behrens, B.-A.; Bouguecha, A.; Klose, C.; Uhe, J. (2017): Einfluss der lokalen Mikrostruktur auf die Umformbarkeit stranggepresster WerkstoffverbundeIn: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 192
  • Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Klose, C.; Behrens, B.-A.; Maier, H. J. (2017): Co-extrusion of semi-finished aluminium-steel compoundsIn: Brabazon, D.; Naher, S.; Ahad, I. U. (Hrsg.): Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. 26-28 April 2017, Dublin, Ireland. AIP Publishing LLC, Melville, New York, 2017, S. 140002
    DOI: 10.1063/1.5008158
  • Kokorin, V.V., Konoplyuk, S.M., Dalinger, A., Thürer, S., Gerstein, G., Mashirov, A., Stetskiv, Y.P., Maier, H.J. (2015): Stress-induced transformation on Ni-Mn-In alloy and the concomitant change of resistivity10th European Symposium on Martensitic Transformations (ESOMAT 2015), Poster presentation, 14. - 17. September 2015, Antwerpen.

Zeitschriften/Aufsätze

  • Thürer, S. E.; Peters, K.; Heidenblut, T.; Heimes, N.; Peddinghaus, J.; Nürnberger, F.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished ProductsMaterials (Basel, Switzerland) 15, 2022 (5), 1692
    DOI: 10.3390/ma15051692
  • Behrens, B.-A.; Uhe, J.; Petersen, T.; Klose, C.; Thürer, S. E.; Diefenbach, J.; Chugreeva, A. (2021): Challenges in the Forging of Steel-Aluminum Bearing BushingsMaterials 14, 2021 (4), 803
    DOI: 10.3390/ma14040803
  • Schäfke, F. P.; Thürer, S. E.; Maier, H. J.; Klose, C. (2021): Development of an Aluminum-Based Hybrid Billet Material for the Process-Integrated Foaming of Hollow Co-ExtrusionsMetals 11, 2021 (9), 1382
    DOI: 10.3390/met11091382
  • Thürer, S. E.; Chugreeva, A.; Heimes, N.; Uhe, J.; Behrens, B.-A.; (2021): Process chain for the manufacture of hybrid bearing bushingsProd. Eng. Res. Devel. (Production Engineering)
    DOI: 10.1007/s11740-021-01028-4
  • Behrens, B.-A.; Maier, H. J.; Klose, C.; Wester, H.; Thürer, S. E.; Heimes, N.; Uhe, J. (2020): Characterization and Modeling of Intermetallic Phase Formation during the Joining of Aluminum and Steel in Analogy to Co-ExtrusionMetals 10, 2020 (12), 1582
    DOI: 10.3390/met10121582
  • Behrens, B.-A.; Maier, H. J.; Poll, G.; Wriggers, P.; Aldakheel, F.; Klose, C.; Nürnberger, F.; Pape, F.; Böhm, C.; Chugreeva, A.; Coors, T.; Duran, D.; Thürer, S. E.; Herbst, S.; Hwang, J.-I.; Matthias, T.; Heimes, N.; Uhe, J. (2020): Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushingProd. Eng. Res. Devel. 14, 2020 5-6, 569-581
    DOI: 10.1007/s11740-020-00992-7
  • Thürer, S. E.; Peddinghaus, J.; Heimes, N.; Caner Bayram, F.; Bal, B.; Uhe, J.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2020): Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound ProfilesMetals 10, 2020, 1162
    DOI: 10.3390/met10091162
  • Angrisani, G. L.; Taptimthong, P.; Thürer, S. E.; Klose, C.; Maier, H. J.; Wurz, M. C.; Möhwald, K. (2018): Magnetic Properties of Thermal Sprayed Tungsten Carbide-Cobalt CoatingsAdv. Eng. Mater. 20, 2018 (9), 1800102
    DOI: 10.1002/adem.201800102
  • Behrens, B.-A.; Klose, C.; Chugreev, A.; Heimes, N.; Thürer, S.; Uhe, J. (2018): A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld SeamsMetals 8, 2018 (9), 717
    DOI: 10.3390/met8090717
  • Klose, C.; Freytag, P.; Otten, M.; Thürer, S. E.; Maier, H. J. (2018): Thermal Properties of Intermetallic Phases at the Interface of Aluminum-Copper Compound CastingsAdv. Eng. Mater. 20, 2018 (6), 1701027
    DOI: 10.1002/adem.201701027
  • Nürnberger, F.; Gerstein, G.; Dalinger, A.; Thürer, S. E.; Vinogradov, A.; Feldhoff, A.; Maier, H. J. (2017): Surface modification of an austenitic stainless steel wire by a multi-pulse treatment with a high-power electric currentJournal of Materials Science 52, 2017 (13), 8007-8015
    DOI: 10.1007/s10853-017-1003-z
  • Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Behrens, B. A.; Klose, C. (2017): Mechanical Properties of Co-Extruded Aluminium-Steel CompoundsKey Engineering Materials 742, 2017, 512-519
    DOI: 10.4028/www.scientific.net/KEM.742.512
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Huskic, A.; Uhe, J.; Frischkorn, C.; Matthias, T.; Stakhieva, A.; Duran, D.; Thürer, S. E.; Golovko, O.; Klose, C. (2016): Umformtechnische Herstellung hybrider Lagerbuchsenwt Werkstattstechnik online 106, 2016 (10), 743-748
  • Kokorin, V. V.; Konoplyuk, S. M.; Dalinger, A.; Thürer, S.; Gerstein, G.; Maier, H. J. (2015): Stress-induced resistivity changes in a Ni-Mn-In alloyApplied Physics Letters, 2015, 106; 131908.
    DOI: 10.1063/1.4917016
  • Kokorin, V. V.; Koledov, V. V.; Shavrov, V. G.; Konoplyuk, S. M.; Thürer, S.; Troyanovsky, D. A.; Maier, H. J.; Khovaylo, V. V. (2014): Effect of thermal cycling on the martensitic transformation in Ni-Mn-In alloysJournal of Applied Physics, 116; S. 103515
    DOI: 10.1063/1.4895585

Doktorarbeiten

  • Thürer, S. E. (2020): Prozessentwicklung für das Verbundstrangpressen hybrider Hohlprofile aus Aluminium und StahlDissertation, Berichte aus dem IW 01/2020, Garbsen: TEWISS Verlag
    ISBN: 978-3-95900-484-8