Tensile, Compression and Bending Tests

Tensile testing according to DIN EN ISO 6892-1 is used to determine static material parameters such as tensile strength, yield strength and elongation. Almost all specimen geometries in accordance with DIN 50125 can be tested on our universal testing machines in the load range between 1 kN and 250 kN and at temperatures between -80 to +250 °C. Compression and bending tests under different environmental conditions can also be carried out.

Tensile testing according to DIN EN ISO 6892-1 is used to determine static material parameters such as tensile strength, yield strength and elongation. Almost all specimen geometries in accordance with DIN 50125 can be tested on our universal testing machines in the load range between 1 kN and 250 kN and at temperatures between -80 to +250 °C. Compression and bending tests under different environmental conditions can also be carried out.

Contact Person for Material Testing

Dr.-Ing. Mark Alan Swider
Management
Address
An der Universität 2
30823 Garbsen
Building
Room
006
Dr.-Ing. Mark Alan Swider
Management
Address
An der Universität 2
30823 Garbsen
Building
Room
006