Prof. Dr.-Ing. Hans Jürgen Maier

Abel, A.; Breitbach, E. J.; Holländer H.; Müller, M.; Griemsmann, T.; Klose, C.; Hermsdorf, J.; Maier H. J.; Kaierle S.; Overmeyer, L. (2025): Influence of a Hydrogen Addition to the Inert Gas and Subsequent Heat Treatments on the Microstructure and Mechanical Properties of Magnesium WE43 Fabricated by PBF-LB/M,  Adv. Eng. Mater. 2025, 2402704
DOI: 10.1002/adem.202402704

Blank, T.; Behrens, S.; Lange, E. L.; Klose, C.; Canadinc, D.; Durisin, M.; Lenarz, T.; Maier, H. J. (2025): The influence of microstructure on the corrosion behavior of platinum used for cochlea implant electrodes,  Corros. Sci. 246, 2025, 112745
DOI: 10.1016/j.corsci.2025.112745

Evers, P.; Reulbach, M.; Emonde, C.; Windhagen, H.; Jakubowitz, E.; Herbst, S.; Maier, H. J.; Nürnberger, F. (2025): Inverse determination of the thermal contact conductance for an interface between a Co28Cr6Mo hip stem and a PMMA-based bone cement,  Scientific Reports, 2025, 15, 5328
DOI: 10.1038/s41598-025-89675-w

Holzmann, E.; Barienti, K.; Guglielmi, M.; Baake, E.; Herbst, S.; Maier, H. J. (2025): Effect of heat treatment on nanoparticle reinforced Nb-18.7Si alloy,  International Journal of Refractory Metals and Hard Materials, 130, 2025, 107170
DOI: 10.1016/j.ijrmhm.2025.107170

Ozdemir, H. C.; Blank, T.; Gerstein, G.; Canadinc, D.; Maier, H. J. (2025): A preliminary assessment of the corrosion behavior of CoCrAlSi alloy as a potential orthopedic implant material,  Journal of Materials Research, 2025
DOI: 10.1557/s43578-024-01514-2

Rodriguez Diaz, M.; Schnettger, A.; Holländer, U.; Szafarska, M.; Gustus, R.; Möhwald, K.; Maier, H. J. (2025): Increasing the Corrosion Resistances of Arc-Sprayed Aluminium Coatings by Means of Oxygen-Free Process Control,  Thermal Spray Bulletin, 2025, 1, 24-30
DOI: 10.53192/TSB20250124

Weiss, M. K. B.; Schumacher, J.; Barton, S.; Maier, H. J. (2025): Detection of microstructural material changes due to hydrogen pressure atmosphere under cyclic load using eddy current testing,  Nondestructive Testing and Evaluation, 2025, 1–16
DOI: 10.1080/10589759.2025.2483372

Acar, S.; Ümit, T.; Cui, C.; Wunde, M.; Hantzsche, K.; Steinbacher, M.; Stockburger, R.; Herbst, S.; Maier, H. J. (2024): Corrosion Resistance and Fracture Toughness of Cryogenic-Treated X153CrMoV12 Tool Steel,  HTM J. Heat Treatm. Mat., 79, 2024, 5, S. 230‒244
DOI: 10.1515/htm-2024-0023

Barton, S.; Weiss, M. K.-B.; Steinbrecher, N.; Maier, H. J. (2024): Resource-efficient regeneration by generating a digital component image based on different NDT techniques,  e-Journal of Nondestructive Testing, 2024
DOI: 10.58286/30035

Blank, T.; Ahrens, A. M.; Klose, C.; Canadinc, D.; Lenarz, T.; Maier, H. J. (2024): Investigating mechanical deformation’s role in cochlear implant durability,  PLOS ONE, 19, 2024, 0306613
DOI: 10.1371/journal.pone.0306613

Blank, T.; Behrens, S.; Klose, C.; Maier, H. J. (2024): Surface Roughness-Dependent Corrosion: Implications for Cochlear Implant Reliability,  Current Directions in Biomedical Engineering, 2024, 10, 91-94
DOI: 10.1515/cdbme-2024-2022

Breitbach, E. J.; Julmi, S.; Behrens, S.; Blank, T.; Abel, A.; Emminghaus, N.; Overmeyer, L.; Klose, C.; Maier, H. J. (2024): Development of Ternary Magnesium Alloys for Laser Powder Bed Fusion: Optimizing Oxide Layer Thickness,  Adv. Eng. Mater., 2024, 2401322
DOI: 10.1002/adem.202401322

Brümmer, N.; Klose, C.; Schleich, J.-T.; Maier, H. J.; Eisenburger, M.; Stiesch, M.; Pott, P.-C. (2024): Shear bond strength between dental adhesive systems and an experimental niobium-based implant material,  J. Mater. Sci.: Mater. Med. 2024, 35, 65

Catal, A. A.; Bedir, E.; Yilmaz, R.; Swider, M. A.; Lee, C.; El-Atwani, O.; Maier, H. J.; Ozdemir, H. C.; Canadinc, D. (2024): Machine learning assisted design of novel refractory high entropy alloys with enhanced mechanical properties,  Computational Materials Science, 231, 2024, 112612
DOI: 10.1016/j.commatsci.2023.112612

Denkena, B.; Breidenstein, B.; Maier, H. J.; Prasanthan, V.; Fricke, L. V.; Zender, F.; Nguyen, H.N.; Zwoch, S.; Wichmann, M.; Barton, S. (2024): A process‑reliable tailoring of subsurface properties during cryogenic turning using dynamic process control,  Production Engineering, (2024), 18, 233-251
DOI: 10.1007/s11740-023-01244-0

Gansel, R.; Heinrich, C.; Lohrengel, A.; Maier, H. J.; Barton, S. (2024): Development of Material Sensors Made of Metastable Austenitic Stainless Steel for Load Monitoring,  J. of Materi Eng and Perform, 2024
DOI: 10.1007/s11665-024-09910-9

Gansel, R.; Quanz, M.; Lohrengel, A.; Maier, H. J.; Barton S. (2024): Qualification of Austenitic Stainless Steels for the Development of Load-Sensitive Material Sensors,  J. of Materi Eng and Perform, 2024
DOI: 10.1007/s11665-024-09287-9

Heinrich, C.; Gansel, R.; Schäfer, G.; Barton, S.; Lohrengel, A.; Maier. H. J. (2024): An approach to interpreting metastable austenitic material sensors for fatigue analysis,  Smart Mater. Struct. 2024, 33, 1-12
DOI: 10.1088/1361-665X/ad4f38

Hinte, C.; Fantin, A.; Barienti, K.; Herbst, S.; Frenzel, J.; Eggeler, G.; Maier, H. J. (2024): A comparative study on Arc‑ and vacuum induction‑melting for Ti16.6Zr16.6Hf16.6Co10Ni20Cu20 high entropy shape memory Alloy Production,  Discov. Mater., 2024, 4, 84
DOI: 10.1007/s43939-024-00134-1

Holzmann, E.; Barienti, K.; Guglielmi, M.; Baake, E.; Herbst, S.; Maier, H. J. (2024): Enhanced mechanical properties of Nb-18.7Si alloy by addition of ceramic nano particles for microstructural control,  Intermetallics, 176, 2025, 108577
DOI: 10.1016/j.intermet.2024.108577

Kahra, C.; Piwek, A.; Peddinghaus, J.; Brunotte, K.; Maier, H.J.; Nürnberger, F.; Herbst, S. (2024): Intermetallic Compound Layer Morphology and Distribution in Friction‐Welded Steel–Aluminum Components,  Adv. Eng. Mater., 2024, 2401606
DOI: 10.1002/adem.202401606

Mohnfeld, N.; Dewidar, A.; Qarbi, K.; Wester, H.; Schäfke, F. P.; Verschinin, A.; Maier, H. J.; Barton, S.; Klose, C.; Uhe, J. (2024): Non-Destructive and Mechanical Characterization of the Bond Quality of Co-Extruded Titanium-Aluminum Profiles,  Adv. Eng. Mater. 2024, 2401716
DOI: 10.1002/adem.202401716

Moreno-Uribe, A. M.; Vaccari, L.; Bracarense, A. Q.; Maier, H. J.; Hassel, T. (2024): Operational performance and metal droplet formation in pulsed-shielded metal arc underwater welding,  Arch. Civ. Mech. Eng, 24, 94, 2024
DOI: 10.1007/s43452-024-00916-7

Ozdemir, H.C.; Nazarahari, A.; Yilmaz, B.; Canadinc, D.; Bedir, E.; Yilmaz, R.; Unal, U.; Maier, H.J. (2024): Machine Learning – informed Development of High Entropy Alloys with Enhanced Corrosion Resistance,  Electrochim. Acta, 2024, 476, 143722
DOI: 10.1016/j.electacta.2023.14372

Reschka, S.; Gerstein, G.; Herbst, S.; Epishin, A.; Maier, H. J. (2024): Influence of High Current Impulses on Element Distribution in Creep-Deformed Single-Crystal Ni-Based Superalloys,  J. Mater. Eng. Perform., 2024
DOI: 10.1007/s11665-024-10054-z

Rodriguez Diaz, M.; Szafarska, M.; Gustus, R.; Möhwald, K.; Maier, H. J. (2024): Arc spraying in silane-doped argon: Widening the material spectrum in oxygen-free process zones,  Thermal Spray Bulletin, 17, 1, 2024, 56-61
DOI: 10.53192/TSB20240156

Schleich, J.-T.; Hahn, L.; Pott, P.-C.; Maier, H. J.; Klose, C. (2024): Co-extrusion of Nb–1Zr Powder for the Production of a Biocompatible High-Strength Material for Dental Implants,  Adv. Eng. Mater., 2024, 2401436
DOI: 10.1002/adem.202401436

Steinbrecher, N.; Maier, H. J.; Barton, S. (2024): Elektromagnetische Härteprüfung für die Wärmeeinflusszone von Schweißnähten unterhalb der Wasserlinie,  Schweißen und Schneiden, 2024, 76, 12, 44-49
DOI: 10.53192/SUS20241244

Vaccari, L.; Klett, J.; Scheithauer, T.; Hassel, T.; Maier, H. J. (2024): Development of a carbon equivalent formula for underwater wet welding,  Welding in the World, 2024, 68
DOI: 10.1007/s40194-024-01899-y

Vaccari, L.; Scheithauer, T.; Lendiel, I.; Klett, J.; Hassel, T.; Maier, H. J. (2024): Corrosion behavior of austenitic stainless steel and nickel-based welded joints in underwater wet welding,  npj Mater. Degrad., 8, 51, 2024
DOI: 10.1038/s41529-024-00471-9

Viebranz, V. F.; Bauer, A.; Hassel, T.; Niendorf, T.; Maier, H. J. (2024): Abnormal Grain Growth and Pseudoelasticity of Industrially Processed Fe–Mn–Al–Ni Shape Memory Alloy Joined by Metal Inert Gas Welding,  Metall. Mater. Trans. A, 2024
DOI: 10.1007/s11661-024-07304-z

Wackenrohr, S.; Torrent, C. J. J.; Herbst, S.; Nürnberger, F.; Krooss, P.; Frenck, J.-M.; Ebbert, C.; Voigt, M.; Grundmeier, G.; Niendorf, T.; Maier, H. J. (2024): Corrosion fatigue behavior of nanoparticle modified iron processed by electron powder bed fusion,  npj Mater Degrad 8, 2024 (1)
DOI: 10.1038/s41529-024-00470-w

Weiss, M. K.-B.; Barton, S.; Maier, H. J. (2024): Assessment of hydrogen-induced material degradation using electromagnetic testing technology,  e-Journal of Nondestructive Testing, 2024
DOI: 10.58286/30036

Barienti, K.; Werwein, S.; Herbst, S.; Maier, H. J.; Nürnberger, F. (2023): A novel way to reduce the critical deformation for cold roll bonding,  Manufacturing Letters 36, 2023, 9-12
DOI: 10.1016/j.mfglet.2022.12.006

Barton, S.; Steinbrecher, N.; Maier, H. J. (2023): Reliable non-destructive detection and characterization of material degradation caused by high-temperature corrosion,  ReJNDT 1, 2023 (1)
DOI: 10.58286/28070

Bauer, A.; Vollmer, M.; Viebranz, V. F.; Maier, H. J.; Niendorf, T. (2023): Structural and superelastic properties of Fe-Mn-Al-Ni shape memory alloy sheets produced on industrial process routes by hot rolling,  Journal of Materials Research and Technology, 2023
DOI: 10.1016/j.jmrt.2023.04.260

Blinn, B.; Hassel, T.; Viebranz, V. F.; Beck, T.; Maier, H. J. (2023): Influence of the grain orientation and δ-ferrite on the cyclic deformation behavior of an austenitic CrNi steel manufactured by wire and arc additive manufacturing,  Materials Science and Engineering: A 44, 2023, 144612
DOI: 10.1016/j.msea.2023.144612

Duderija, B.; González-Orive, A.; Schmidt, H. C.; Calderón, J. C.; Hordych, I.; Maier, H. J.; Homberg, W.; Grundmeier, G. (2023): Electrografting of BTSE,  Journal of Advanced Joining Processes 7, 2023 (2), 100137
DOI: doi.org/10.1016/j.jajp.2022.100137

Fricke, L. V.; Basten, S.; Nguyen, H. N.; Breidenstein, B.; Kirsch, B.; Aurich, J. C.; Zaremba, D.; Maier, H. J.; Barton, S. (2023): Combined influence of cooling strategies and depth of cut on the deformation-induced martensitic transformation turning AISI 304,  Journal of Materials Processing Technology 312, 2023 (1), 117861
DOI: 10.1016/j.jmatprotec.2023.117861

Fromm, A. C.; Kahra, C.; Selmanovic, A.; Maier, H. J.; Klose, C. (2023): An X-ray Microscopy Study of the Microstructural Effects on Thermal Conductivity in Cast Aluminum-Copper Compounds,  Metals 13, 2023 (4), 671
DOI: 10.3390/met13040671

Gansel, R.; Zwoch, S.; Heinrich, C.; Lohrengel, A.; Maier, H. J.; Barton, S. (2023): Identification of overloads on splined shafts by means of eddy current testing technology,  Proceedings of the 13th European Conference on Non-Destructive Testing, 2023, 1-6
DOI: 10.58286/28069

Gansel, René; Maier, Hans Jürgen; Barton, Sebastian (2023): Detection and Characterization of Fatigue Cracks in Butt Welds of Offshore Structures Using the Eddy Current Method,  Diagnostics and Prognostics of Engineering Systems 6, 2023 (2), 56
DOI: 10.1115/1.4056313

Greuling, A.; Wiemken, M.; Kahra, C.; Maier, H. J.; Eisenburger, M. (2023): Fracture Resistance of Repaired 5Y-PSZ Zirconia Crowns after Endodontic Access,  Dentistry Journal 11, 2023 (3), 76
DOI: 10.3390/dj11030076

Heinrich, C.; Gansel, R.; Schäfer, G.; Barton, S.; Lohrengel, A.; Maier, H. J. (2023): Lastsensitive Zahnwelle mit sensorischem Werkstoff als sensorintegriertes Maschinenelement,  DFG SPP 2305, 2023, 101-106
DOI: 10.21268/20230425-9

Herbst, S.; Karsten, E.; Gerstein, G.; Reschka, S.; Nürnberger, F.; Zaefferer, S.; Maier, H. J. (2023): Electroplasticity Mechanisms in hcp Materials,  Adv. Eng. Mater., 2023
DOI: https://doi.org/10.1002/adem.202201912

Hölscher, L. V.; Hassel, T.; Maier, H. J. (2023): Development and evaluation of a closed-loop z-axis control strategy for wire-and-arc-additive manufacturing using the process signal,  Int J Adv Manuf Technol, 2023
DOI: 10.1007/s00170-023-12012-w

Klett, J.; Bongartz, B.; Wolf, T.; Hao, C.; Maier, H. J.; Hassel, T. (2023): Plasma Welding of Aluminum in an Oxygen-Free Argon Atmosphere,  Advances In Materials Science 23, 2023 (1), 5-18
DOI: 10.2478/adms-2023-0001

Maier, H. J.; Gawlytta, R.; Fromm, A.; Klose, C. (2023): Increasing thermal conductivity in aluminium-copper compound castings: modelling and experiments,  Materials Science and Technology 22, 2023, 1-11
DOI: 10.1080/02670836.2023.2184591

Nazarahari, A.; Fromm, A. C.; Ozdemir, H. C.; Klose, C.; Maier, H. J.; Canadinc, D. (2023): Determination of thermal conductivity of eutectic Al–Cu compounds utilizing experiments, molecular dynamics simulations and machine learning,  Modelling Simul. Mater. Sci. Eng. 31, 2023 (4), 45001
DOI: 10.1088/1361-651X/acc960

Ozdemir, H. C.; Nazarahari, A.; Yilmaz, B.; Unal, U.; Maier, H. J.; Canadinc, D.; Bedir, E.; Yilmaz, R. (2023): Understanding the enhanced corrosion performance of two novel Ti-based biomedical high entropy alloys,  Journal of Alloys and Compounds 956, 2023, 170343
DOI: 10.1016/j.jallcom.2023.170343

Raumel, S.; Barienti, K.; Luu, H.-T.; Merkert, N.; Dencker, F.; Nürnberger, F.; Maier, H. J.; Wurz, M. C. (2023): Characterization of the tribologically relevant cover layers formed on copper in oxygen and oxygen-free conditions,  Friction, 11, 2023
DOI: 10.1007/s40544-022-0695-5

Reschka, S.; Gerstein, G.; Dalinger, A.; Zaibet, M. F.; Herbst, S.; Maier, H. J. (2023): Accelerated coarsening behavior of the γ´-phase in CMSX-4 during non-isothermal heat treatment,  Materials Today Communications 36, 2023, 106703
DOI: 10.1016/j.mtcomm.2023.106703

Rodriguez Diaz, M.; Hassel, T.; Hölscher, L. V.; Szafarska, M.; Gustus, R.; Möhwald, K.; Maier, H. J. (2023): Thermal spraying in oxygen-free environment: Meltoff and atomisation behaviour of twin-wire arc spraying processes in silane-doped inert gases,  Thermal Spray Bulletin, 16, 1, 2023, 24-30
DOI: 10.53192/TSB20230124

Schäfke, F. P.; Timmann, F.; Klose, C.; Hürkamp, A.; Dröder, K.; Maier, H. J. (2023): Development of EN AW-6082 Metal Foams and Stochastic Foam Modeling for the Individualization of Extruded Profiles,  Journal of Materials Engineering and Performance, 2023
DOI: 10.1007/s11665-023-09031-9

Schnettger, A.; Holländer, U.; Maier, H. J. (2023): A Composite of Polyether Ether Ketone and Silica‐Coated Copper Particles for Creating Tailored Conductive Tracks via Laser Printing,  Macro Materials & Eng, 2023
DOI: 10.1002/mame.202300264

Vaccari, L.; Wolf, T.; Lendiel, I.; Maier, H. J.; Hassel, T. (2023): Untersuchung zum Korrosionsrisiko beim Einsatz von austenitischem Schweißgut zur Vermeidung wasserstoffinduzierter Rissbildung beim nassen Unterwasserschweißen,  DVS Berichte 2023, 68-77

Wegewitz, L.; Maus-Friedrichs, W.; Gustus, R.; Maier, H. J.; Herbst, S. (2023): Oxygen‐Free Production—From Vision to Application,  Adv. Eng. Mater., 2023, 2201819
DOI: 10.1002/adem.202201819

Barton, S.; Weiss, M. K.-B.; Maier, H. J. (2022): In-Situ Characterization of Microstructural Changes in Alloy 718 during High-Temperature Low-Cycle Fatigue,  Metals 12, 2022 (11), 1871
DOI: 10.3390/met12111871

Bobzin, K.; Brögelmann, T.; Kruppe, N. C.; Maier, H. J.; Heidenblut, T.; Besserer, H.-B.; Kahra, C. (2022): CrN/AlN nanolaminates: Architecture, residual stresses, and cracking behavior,  Journal of Vacuum Science & Technology A 40, 2022 (1), 13414
DOI: 10.1116/6.0001462

Brätz, O.; Klett, J.; Wolf, T.; Henkel, K.-M.; Maier, H. J.; Hassel, T. (2022): Induction Heating in Underwater Wet Welding—Thermal Input, Microstructure and Diffusible Hydrogen Content,  Materials (Basel, Switzerland) 15, 2022 (4), 1417
DOI: 10.3390/ma15041417

Coors, T.; Faqiri, M. Y.; Saure, F.; Kahra, C.; Büdenbender, C.; Peddinghaus, J.; Prasanthan, V.; Pape, F.; Hassel, T.; Herbst, S.; Nürnberger, F.; Wester, H.; Uhe, J.; Breidenstein, B.; Denkena, B.; Behrens, B.-A.; Poll, G.; Maier, H. J. (2022): Investigations on Additively Manufactured Stainless Bearings,  Investigations on Additively Manufactured Stainless Bearings. Coatings 12, 2022 (11), 1699
DOI: 10.3390/coatings12111699

Fricke, L. V.; Gerstein, G.; Kotzbauer, A.; Breidenstein, B.; Barton, S.; Maier, H. J. (2022): High Strain Rate and Stress-State-Dependent Martensite Transformation in AISI 304 at Low Temperatures,  Metals 12, 2022 (5), 747
DOI: 10.3390/met12050747

Fricke, L. V.; Nguyen, H. N.; Appel, J.; Breidenstein, B.; Maier, H. J.; Zaremba, D.; Barton, S. (2022): Characterization of deformation-induced martensite by cryogenic turning using eddy current testing,  Procedia CIRP 108, 2022 (0), 49-54
DOI: 10.1016/j.procir.2022.03.014

Fricke, L. V.; Thürer, S. E.; Jahns, M.; Breidenstein, B.; Maier, H. J.; Barton, S. (2022): Non-destructive, Contactless and Real-Time Capable Determination of the α’-Martensite Content in Modified Subsurfaces of AISI 304,  J Nondestruct Eval 41, 2022 (4), 123
DOI: 10.1007/s10921-022-00905-x

Fricke, L. V.; Thürer, S. E.; Kahra, C.; Bährisch, S.; Herbst, S.; Nürnberger, F.; Behrens, B.-A.; Maier, H. J.; Klose, C.; Barton, S. (2022): Non-destructive Evaluation of Workpiece Properties along the Hybrid Bearing Bushing Process Chain,  J. of Materi Eng and Perform 11, 2022 (2), 5725
DOI: 10.1007/s11665-022-07598-3

Fromm, A. C.; Barienti, K.; Selmanovic, A.; Thürer, S. E.; Nürnberger, F.; Maier, H. J.; Klose, C. (2022): Oxygen-Free Compound Casting of Aluminum and Copper in a Silane-Doped Inert Gas Atmosphere,  Inter Metalcast 20, 2022 (1), 1701027
DOI: 10.1007/s40962-022-00910-w

Fromm, A., Gawlytta, R., Holzmann, E., Klose, C., Maier, H. J. (2022): Oxidfreier Verbundguss - Optimale Wärmeleitung zwischen artfremden Verbundpartnern,  Giesserei Special 109, 2022, 32-40

Gurel, S.; Nazarahari, A.; Canadinc, D.; Gerstein, G.; Maier, H. J.; Cabuk, H.; Bukulmez, T.; Cananoglu, M.; Yagci, M. B.; Toker, S. M.; Gunes, S.; Soykan, M. N. (2022): From corrosion behavior to radiation response,  Intermetallics 149, 2022, 107680
DOI: 10.1016/j.intermet.2022.107680

Hassel, T.; Maier, H. J.; Alkhimenko, A.; Davydov, A.; Shaposhnikov, N.; Turichin, G.; Klimova, O. (2022): Investigation of the mechanical properties and corrosion behaviour of hybrid L 80 Type 1 and duplex steel joints produced by magnetically impelled arc butt welding,  Journal of Advanced Joining Processes 5, 2022 (9), 100109
DOI: 10.1016/j.jajp.2022.100109

Heinrich, C.; Lohrengel, A.; Gansel, R.; Maier, H. J. (2022): Lastsensitive Zahnwelle mit sensorischem Werkstoff,  VDI-Bericht 2408 – 9. VDI-Fachtagung Welle-Nabe-Verbindungen 2022, 2022, 253-257

Hölscher, L. V.; Hassel, T.; Maier, H. J. (2022): Detection of the contact tube to working distance in wire and arc additive manufacturing,  Int J Adv Manuf Technol 120, 2022, 989-999
DOI: 10.1007/s00170-022-08805-0

Huang, J.; Voigt, M.; Wackenrohr, S.; Ebbert, C.; Keller, A.; Maier, H. J.; Grundmeier, G. (2022): Influence of hydrogel coatings on corrosion and fatigue of iron in simulated body fluid,  Materials & Corrosion, 2022, 599
DOI: 10.1002/maco.202112841

Klett, J.; Bongartz, B.; Viebranz, V. F.; Kramer, D.; Hao, C.; Maier, H. J.; Hassel, T. (2022): Investigations into Flux-Free Plasma Brazing of Aluminum in a Local XHV-Atmosphere,  Materials (Basel, Switzerland) 15, 2022 (23), 8292
DOI: 10.3390/ma15238292

Mlinaric, M.; Jemaa, H.; Hassel, T.; Maier, H. J. (2022): An Experimental and Numerical Study of Damage Due to Particle Impact on Sapphire Orifices Used in High-Pressure Water Jet Cutting,  Machines 10, 2022 (9), 756
DOI: 10.3390/machines10090756

Munk, L.; Reschka, S.; Löhnert, S.; Maier, H. J.; Wriggers, P. (2022): A sharp-interface model for diffusional evolution of precipitates in visco-plastic materials,  Computer Methods in Applied Mechanics and Engineering 391, 2022, 114440
DOI: 10.1016/j.cma.2021.114440

Rodriguez Diaz, M., Nicolaus, M., Möhwald, K., Maier, H. J. (2022): Thermal spraying in silane-doped shielding gases: A new approach for innovative coatings in controlled process atmospheres,  Thermal Spray Bulletin 14 (2), 120-127

Rodriguez Diaz, M.; Raumel, S.; Wurz, M. C.; Szafarska, M.; Gustus, R.; Möhwald, K.; Maier, H. J. (2022): Young’s Modulus and Residual Stresses of Oxide-Free Wire Arc Sprayed Copper Coatings,  Coatings, 12, 10, 2022, 1482
DOI: 10.3390/coatings12101482

Rodriguez Diaz, M.; Szafarska, M.; Gustus, R.; Möhwald, K.; Maier, H. J. (2022): Oxide Free Wire Arc Sprayed Coatings—An Avenue to Enhanced Adhesive Tensile Strength,  Metals 12, 2022 (4), 684
DOI: 10.3390/met12040684

Svetlov, I. L.; Epishin, A. I.; Petrushin, N. V.; Gerstein, G.; Nolze, G.; Maier, H. J. (2022): Creep of Directionally Solidified Eutectics Ni/Ni3 Al–NbC under Thermal Cycling,  Inorganic Materials: Applied Research 13, 2022 (4), 1099-1108
DOI: 10.1134/S2075113322040347

Thürer, S. E.; Peters, K.; Heidenblut, T.; Heimes, N.; Peddinghaus, J.; Nürnberger, F.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished Products,  Materials (Basel, Switzerland) 15, 2022 (5), 1692
DOI: 10.3390/ma15051692

Viebranz, V. F.; Hassel, T.; Maier, H. J. (2022): Microstructural Investigation of a FeMnAlNi Shape Memory Alloy Processed by Tungsten Inert Gas Wire and Arc Additive Manufacturing,  Metals 12, 2022 (10), 1731
DOI: 10.3390/met12101731

Viebranz, V. F.; Hassel, T.; Niendorf, T.; Maier, H. J. (2022): Welding characteristics and microstructure of an industrially processed Fe-Mn-Al-Ni shape memory alloy joined by tungsten inert gas welding,  Weld World 333, 2022, 68
DOI: 10.1007/s40194-022-01364-8

Wackenrohr, S.; Torrent, C. J. J.; Herbst, S.; Nürnberger, F.; Krooss, P.; Ebbert, C.; Voigt, M.; Grundmeier, G.; Niendorf, T.; Maier, H. J. (2022): Corrosion fatigue behavior of electron beam melted iron in simulated body fluid,  npj Mater Degrad 6, 2022 (1), 1917
DOI: 10.1038/s41529-022-00226-4

Wolf, M.; Flormann, J.; Steinhoff, T.; Gerstein, G.; Nürnberger, F.; Maier, H. J.; Feldhoff, A. (2022): Cu-Ni-Based Alloys from Nanopowders as Potent Thermoelectric Materials for High-Power Output Applications,  Alloys 1, 2022 (1), 3-14
DOI: 10.3390/alloys1010002

Astafurova, E. G.; Panchenko, M.; Reunova, K. A.; Mikhno, A. S.; Moskvina, V. A.; Melnikov, E. V.; Astafurov, S. V.; Maier, H. J. (2021): The effect of nitrogen alloying on hydrogen-assisted plastic deformation and fracture in FeMnNiCoCr high-entropy alloys,  Scripta Materialia 194, 2021, 113642
DOI: 10.1016/j.scriptamat.2020.113642

Barienti, K.; Klein, M.; Wackenrohr, S.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2021): Influence of Pre-strain on Very-Low-Cycle Stress–Strain Response and Springback Behavior,  J. of Materi Eng and Perform 5, 2021 (3), 4353
DOI: 10.1007/s11665-020-05399-0

Barton, S.; Zaremba, D.; Maier, H. J. (2021): Microstructural degradation in the subsurface layer of the nickel base alloy 718 upon high-temperature oxidation,  Materials at High Temperatures 33, 2021 (4), 1-11
DOI: 10.1080/09603409.2021.1895541

Bobzin, K.; Brögelmann, T.; Maier, H. J.; Heidenblut, T.; Kahra, C.; Carlet, M. (2021): Influence of residual stresses in hard tool coatings on the cutting performance,  Journal of Manufacturing Processes 69, 2021, 340-350
DOI: 10.1016/j.jmapro.2021.08.011

Cui, C.; Dong, J.; Epp, J.; Schulz, A.; Steinbacher, M.; Acar, S.; Herbst, S.; Maier, H. J. (2021): In Situ X‐Ray Diffraction Analysis of Microstructure Evolution during Deep Cryogenic Treatment and Tempering of Tool Steels,  Steel research int 409, 2021, 2100076
DOI: 10.1002/srin.202100076

Demler, E.; Diedrich, A.; Dalinger, A.; Gerstein, G.; Herbst, S.; Zaefferer, S.; Maier, H. J. (2021): Changes in Mechanical and Microstructural Properties of Magnesium Alloys Resulting from Superimposed High Current Density Pulses,  Materials Science Forum (THERMEC 2021) 1016, 2021, 385-391
ISSN: 1662-9752

Denkena, B.; Breidenstein, B.; Dittrich, M.-A.; Nguyen, H. N.; Fricke, L. V.; Maier, H. J.; Zaremba, D. (2021): Effects on the deformation-induced martensitic transformation in AISI 304 in external longitudinal turning,  Advances in Industrial and Manufacturing Engineering 2, 2021 (1), 100044
DOI: 10.1016/j.aime.2021.100044

Fricke, L. V.; Barton, S.; Maier, H. J.; Zaremba, D. (2021): Control of Heat Treatment of Case-Hardening Steel 18CrNiMo7-6 by Determining the Penetration Depth of Eddy Currents,  Met Sci Heat Treat 321, 2021 (23), 3878
DOI: 10.1007/s11041-021-00627-3

Fricke, L. V.; Gerstein, G.; Breidenstein, B.; Nguyen, H. N.; Dittrich, M.-A.; Maier, H. J.; Zaremba, D. (2021): Deformation-induced martensitic transformation in AISI304 by cryogenic machining,  Materials Letters, 2021, 129090
DOI: 10.1016/j.matlet.2020.129090

Gansel, R.; Zimmermann, C.; Fricke, L. V.; Lüdtke, M.; Klümper-Westkamp, H.; Fechte-Heinen, R.; Maier, H. J.; Zaremba, D. (2021): Characterization of Graded Subsurface Zones in Industrial Case-Hardening Using a Non-Destructive Testing System,  HTM 76, 2021 (3), 237-245
DOI: 10.1515/htm-2021-0006

Gerstein, G.; Kahra, C.; Golovko, O.; Schäfke, F.; Klose, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2021): Hot forming of shape memory alloys in steel shells,  Prod. Eng. Res. Devel. 481–482, 2021 (3), 266
DOI: 10.1007/s11740-021-01024-8

Görzen, D.; Schäfke, F. P.; Blinn, B.; Klose, C.; Maier, H. J.; Beck, T. (2021): Investigating the Influence of Process Parameters on the Mechanical Properties of Extruded Aluminum Tubes by Cyclic Indentation Tests,  Metals 11, 2021 (5), 744
DOI: 10.3390/met11050744

Gurel, S.; Yagci, M. B.; Canadinc, D.; Gerstein, G.; Bal, B.; Maier, H. J. (2021): Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading,  Materials Science and Engineering: A 803, 2021, 140456
DOI: 10.1016/j.msea.2020.140456

Hetzel, A.; Schulte, R.; Vogel, M.; Lechner, M.; Besserer, H.-B.; Maier, H. J.; Sauer, C.; Schleich, B.; Wartzack, S.; Merklein, M. (2021): Functional Analysis of Components Manufactured by a Sheet-Bulk Metal Forming Process,  JMMP 5, 2021 (2), 49
DOI: 10.3390/jmmp5020049

Holländer, U., Schmieding, M., Möhwald, K., Maier, H.J. (2021): Entwicklung von Kupfer-Aluminium-Verbundloten zur In-situ-Bildung von CuAl-Lotlegierungen beim Ofenlöten von CrNi-Stählen,  Schweißen und Schneiden 73, 2021 (5), 284-293

Hordych, I.; Barienti, K.; Herbst, S.; Maier, H. J.; Nürnberger, F. (2021): Cold Roll Bonding of Tin-Coated Steel Sheets with Subsequent Heat Treatment,  Metals 11, 2021 (6), 917
DOI: 10.3390/met11060917

Julmi, S.; Abel, A.; Gerdes, N.; Hoff, C.; Hermsdorf, J.; Overmeyer, L.; Klose, C.; Maier, H. J. (2021): Development of a Laser Powder Bed Fusion Process Tailored for the Additive Manufacturing of High-Quality Components Made of the Commercial Magnesium Alloy WE43,  Materials 11, 2021 (4), 887
DOI: 10.3390/ma14040887

Kahra, C.; Nürnberger, F.; Maier, H. J.; Herbst, S. (2021): Heat Transfers Coefficients of Directly and Indirectly Cooled Component Areas during Air-Water Spray Cooling,  HTM 76, 2021 (1), 64-75
DOI: 10.1515/htm-2020-0005

Kelly, C. N.; Kahra, C.; Maier, H. J.; Gall, K. (2021): Processing, Structure, and Properties of Additively Manufactured Titanium Scaffolds with Gyroid-Sheet Architecture,  Additive Manufacturing 19, 2021 (12), 101916
DOI: 10.1016/j.addma.2021.101916

Melchert, N.; Weiss, M. K.-B.; Betker, T.; Frackowiak, W.; Gansel, R.; Keunecke, L.; Reithmeier, E.; Maier, H. J.; Kästner, M.; Zaremba, D. (2021): Combination of optical metrology and non-destructive testing technology for the regeneration of aero engine components,  tm - Technisches Messen 0, 2021 (0)
DOI: 10.1515/teme-2020-0093

Mohammadi, A.; Koyama, M.; Gerstein, G.; Maier, H. J.; Noguchi, H. (2021): Hydrogen-assisted Crack Propagation in Pre-strained Twinning-induced Plasticity Steel: From Initiation at a Small Defect to Failure,  ISIJ Int. 61, 2021 (4), 1278-1286
DOI: 10.2355/isijinternational.ISIJINT-2019-510

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2021): Thermally Sprayed Nickel-Based Repair Coatings for High-Pressure Turbine Blades: Controlling Void Formation during a Combined Brazing and Aluminizing Process,  Coatings 11, 2021 (6), 725
DOI: 10.3390/coatings11060725

Piorunek, D.; Oluwabi, O.; Frenzel, J.; Kostka, A.; Maier, H. J.; Somsen, C.; Eggeler, G. (2021): Effect of off-stoichiometric compositions on microstructures and phase transformation behavior in Ni-Cu-Pd-Ti-Zr-Hf high entropy shape memory alloys,  Journal of Alloys and Compounds 857, 2021, 157467
DOI: 10.1016/j.jallcom.2020.157467

Rodriguez Diaz, M.; Nicolaus, M.; Möhwald, K.; Maier, H. J. (2021): Thermal spraying in silane-doped shielding gases: A new approach for innovative coatings in controlled process atmospheres,  Thermal Spray Bulletin, 14, 2, 2021, 120-127
ISSN: 1866–6248

Schäfke, F. P.; Thürer, S. E.; Maier, H. J.; Klose, C. (2021): Development of an Aluminum-Based Hybrid Billet Material for the Process-Integrated Foaming of Hollow Co-Extrusions,  Metals 11, 2021 (9), 1382
DOI: 10.3390/met11091382

Schöler, S.; Langohr, A.; Özkaya, F.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2021): Investigations of hot-dip galvanized dual-phase steel (DP600+Z) sheet metal on selectively oxidized tool steel surfaces under dry deep-drawing conditions,  Wear XII, 2021, 203742
DOI: 10.1016/j.wear.2021.203742

Schwarzenböck, E.; Wiehler, L.; Heidenblut, T.; Hack, T.; Engel, C.; Maier, H. J. (2021): Crack initiation of an industrial 7XXX aluminum alloy in humid air analyzed via slow strain rate testing and constant displacement testing,  Materials Science and Engineering: A 804, 2021 (10), 140776
DOI: 10.1016/j.msea.2021.140776

Torrent, C. J. J.; Wackenrohr, S.; Richter, J.; Sobrero, C. E.; Degener, S.; Krooß, P.; Maier, H. J.; Niendorf, T. (2021): On the Microstructural and Cyclic Mechanical Properties of Pure Iron Processed by Electron Beam Melting,  Adv. Eng. Mater. 327, 2021, 2100018
DOI: 10.1002/adem.202100018

Barienti, K.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Ion Beam Processing for Sample Preparation of Hybrid Materials with Strongly Differing Mechanical Properties,  Metallogr. Microstruct. Anal. 9, 2020 (1), 54-60
DOI: 10.1007/s13632-019-00605-5

Behrens, B.-A.; Chugreeva, A.; Diefenbach, J.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Microstructural Evolution and Mechanical Properties of Hybrid Bevel Gears Manufactured by Tailored Forming,  Metals 10, 2020 (10), 1365
DOI: 10.3390/met10101365

Behrens, B.-A.; Maier, H. J.; Klose, C.; Wester, H.; Thürer, S. E.; Heimes, N.; Uhe, J. (2020): Characterization and Modeling of Intermetallic Phase Formation during the Joining of Aluminum and Steel in Analogy to Co-Extrusion,  Metals 10, 2020 (12), 1582
DOI: 10.3390/met10121582

Behrens, B.-A.; Maier, H. J.; Poll, G.; Wriggers, P.; Aldakheel, F.; Klose, C.; Nürnberger, F.; Pape, F.; Böhm, C.; Chugreeva, A.; Coors, T.; Duran, D.; Thürer, S. E.; Herbst, S.; Hwang, J.-I.; Matthias, T.; Heimes, N.; Uhe, J. (2020): Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing,  Prod. Eng. Res. Devel. 14, 2020 5-6, 569-581
DOI: 10.1007/s11740-020-00992-7

Coors, T.; Mildebrath, M.; Büdenbender, C.; Saure, F.; Faqiri, M. Y.; Kahra, C.; Prasanthan, V.; Chugreeva, A.; Matthias, T.; Budde, L.; Pape, F.; Nürnberger, F.; Hassel, T.; Hermsdorf, J.; Overmeyer, L.; Breidenstein, B.; Denkena, B.; Behrens, B.-A.; Maier, H. J.; Poll, G. (2020): Investigations on Tailored Forming of AISI 52100 as Rolling Bearing Raceway,  Metals 10, 2020 (10), 1363
DOI: 10.3390/met10101363

Fedorov, V.; Uhlig, T.; Wagner, G.; Langohr, A.; Holländer, U.; Maier, H. (2020): Influence of nitrogen in process atmospheres on the corrosion and the fatigue behavior of brazed stainless steel joints,  Welding and Cutting 19, 2020 (4), 312-317

Fricke, L. V.; Nguyen, H. N.; Breidenstein, B.; Denkena, B.; Dittrich, M.-A.; Maier, H. J.; Zaremba, D. (2020): Generation of tailored subsurface zones in steels containing metastable austenite by adaptive machining and validation by eddy current testing,  Technisches Messen, 2020
DOI: 10.1515/teme-2020-0045

Fricke, L. V.; Nguyen, H. N.; Breidenstein, B.; Zaremba, D.; Maier, H. J. (2020): Eddy Current Detection of the Martensitic Transformation in AISI304 Induced upon Cryogenic Cutting,  Steel Research Int. 2, 2020, 2000299
DOI: 10.1002/srin.202000299

Gartzke, A.-K.; Julmi, S.; Klose, C.; Besdo, S.; Waselau, A.-C.; Meyer-Lindenberg, A.; Maier, H. J.; Wriggers, P. (2020): Investigation of degraded bone substitutes made of magnesium alloy using scanning electron microscope and nanoindentation,  Journal of the Mechanical Behavior of Biomedical Materials 109, 2020, 103825
DOI: 10.1016/j.jmbbm.2020.103825

Gartzke, A.-K.; Julmi, S.; Klose, C.; Waselau, A.-C.; Meyer-Lindenberg, A.; Maier, H. J.; Besdo, S.; Wriggers, P. (2020): A simulation model for the degradation of magnesium-based bone implants,  Journal of the Mechanical Behavior of Biomedical Materials 101, 2020, 103411
DOI: 10.1016/j.jmbbm.2019.103411

Gushchina, M.; Carstensen, T.; Maier, H.J.; Hassel, T. (2020): Plasma nitriding Ti-6Al-4V with the aid non-transmitted plasma-arc using different protection atmosphere,  Materials Today: Proceedings, Volume 30, Part 3, 2020, Pages 694-699, ISSN 2214-7853,
DOI: https://doi.org/10.1016/j.matpr.2020.01.524

Hinte, C.; Barienti, K.; Steinbrücker, J.; Gerstein, G.; Swider, M. A.; Herbst, S.; Eggeler, G.; Maier, H. J. (2020): Pattern-forming nanoprecipitates in NiTi-related high entropy shape memory alloys,  Scripta Materialia 186, 2020, 132-135
DOI: 10.1016/j.scriptamat.2020.05.007

Hinte, C.; Barienti, K.; Steinbrücker, J.; Hartmann, J.-M.; Gerstein, G.; Herbst, S.; Piorunek, D.; Frenzel, J.; Fantin, A.; Maier, H. J. (2020): The Effect of Increasing Chemical Complexity on the Mechanical and Functional Behavior of NiTi-Related Shape Memory Alloys,  Shap. Mem. Superelasticity 122, 2020, 106792
DOI: 10.1007/s40830-020-00284-0

Klett, J.; Hecht-Linowitzki, V.; Grünzel, O.; Schmidt, E.; Maier, H. J.; Hassel, T. (2020): Effect of the water depth on the hydrogen content in SMAW wet welded joints,  Springer Nature Applied Sciences 2, 2020 (7), 25
DOI: 10.1007/s42452-020-3066-8

Klett, J.; Mattos, I. B. F.; Maier, H. J.; e Silva, R. H. G.; Hassel, T. (2020): Control of the diffusible hydrogen content in different steel phases through the targeted use of different welding consumables in underwater wet welding,  Materials and Corrosion 8, 2020 (3), 11
DOI: 10.1002/maco.202011963

Klett, J.; Wolf, T.; Maier, H. J.; Hassel, T. (2020): The Applicability of the Standard DIN EN ISO 3690 for the Analysis of Diffusible Hydrogen Content in Underwater Wet Welding,  Materials 13, 2020 (17), 3750
DOI: 10.3390/ma13173750

Konoplyuk, S. M.; Kokorin, V. V.; Kolomiets, A. V.; Paukov, M.; Kastil, J.; Gerstein, G.; Maier, H. J. (2020): Order and Temperatures of Magnetic Transitions in a Ni₅₁.₉Mn₂₇.₀Ga₂₁.₁ Alloy,  IEEE Trans. Magn. 56, 2020 (7), 1-5
DOI: 10.1109/TMAG.2020.2991317

L'vov, V. A.; Kosogor, A.; Palamarchuk, S. I.; Gerstein, G.; Maier, H. J. (2020): Influence of incorporated nanoparticles on superelastic behavior of shape memory alloys,  Materials Science and Engineering: A 776, 2020, 139025
DOI: 10.1016/j.msea.2020.139025

Maier, H. J.; Herbst, S.; Denkena, B.; Dittrich, M.-A.; Schaper, F.; Worpenberg, S.; Gustus, R.; Maus-Friedrichs, W. (2020): Towards Dry Machining of Titanium-Based Alloys: A New Approach Using an Oxygen-Free Environment,  Metals 10, 2020 (9), 1161
DOI: 10.3390/met10091161

Maier, H. J.; Julmi, S.; Behrens, S.; Klose, C.; Gartzke, A.-K.; Wriggers, P.; Waselau, A.-C.; Meyer-Lindenberg, A. (2020): Magnesium Alloys for Open-Pored Bioresorbable Implants,  JOM 72, 2020 (5), 1859-1869
DOI: 10.1007/s11837-020-04078-8

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2020): Application of a titanium filler metal by cold gas dynamic spraying,  Thermal Spray Bulletin 13, 2020 (2), 108-113

Reschka, S.; Gerstein, G.; Herbst, S.; Munk, L.; Wriggers, P.; Maier, H.J. (2020): 3D orientation data - A comparison of diffraction contrast tomography and serial sectioning electron backscatter diffraction for the nickel-base superalloy IN738LC,  Materials Letters, 2020, 127177
DOI: 10.1016/j.matlet.2019.127177

Sajadifar, S. V.; Maier, H. J.; Niendorf, T.; Yapici, G. G. (2020): Fracture Behavior of Ultrafine-Grained Titanium Under Tension at Elevated Temperatures,  Journal of Engineering Materials and Technology 142, 2020 (4), 041009
DOI: 10.1115/1.4047747

Samothrakitis, S.; Larsen, C. B.; Woracek, R.; Heller, L.; Kopeček, J.; Gerstein, G.; Maier, H. J.; Rameš, M.; Tovar, M.; Šittner, P.; Schmidt, S.; Strobl, M. (2020): A multiscale study of hot-extruded CoNiGa ferromagnetic shape-memory alloys,  Materials & Design 196, 2020, 109118
DOI: 10.1016/j.matdes.2020.109118

Schöler, S.; Kock, C.; Özkaya, F.; Nowak, C.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2020): Numerical Simulation of the Abrasive Wear Behavior of Selectively Oxidized α-Fe2O3 Oxide Layers on Tool Steel Surfaces,  JOM 72, 2020 (7), 2536-2547
DOI: 10.1007/s11837-020-04172-x

Schulz, A.; Cui, C.; Steinbacher, M.; Ümit, T.; Wunde, M.; Jung, I.; Acar, S.; Nürnberger, F.; Gerstein, G.; Herbst, S.; Maier, H. J. (2020): Effects of Cryogenic Treatment on the Microstructure and Mechanical Properties of High-alloyed Tool Steels,  HTM 75, 2020 (5), 287-307
DOI: 10.3139/105.110422

Thürer, S. E.; Peddinghaus, J.; Heimes, N.; Caner Bayram, F.; Bal, B.; Uhe, J.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2020): Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound Profiles,  Metals 10, 2020, 1162
DOI: 10.3390/met10091162

Vaughan, M. W.; Karayan, A. I.; Srivastava, A.; Mansoor, B.; Seitz, J. M.; Eifler, R.; Karaman, I.; Castaneda, H.; Maier, H. J. (2020): The effects of severe plastic deformation on the mechanical and corrosion characteristics of a bioresorbable Mg-ZKQX6000 alloy,  Materials Science and Engineering: C 115, 2020, 111130
DOI: 10.1016/j.msec.2020.111130

Barienti, K.; Wolff, D.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2019): Influence of Alternating Short-Cycle Bending on the Mechanical Properties of Copper, α-Titanium and the Mild Steel DC01,  J. of Materi Eng and Perform 28, 2019 (11), 7165-7170
DOI: 10.1007/s11665-019-04458-5

Behrens, B.-A.; Chugreev, A.; Matthias, T.; Poll, G.; Pape, F.; Coors, T.; Hassel, T.; Maier, H.; Mildebrath, M. (2019): Manufacturing and Evaluation of Multi-Material Axial-Bearing Washers by Tailored Forming,  Metals 9, 2019 (2), 232
DOI: 10.3390/met9020232

Eftifeeva, A.; Panchenko, E.; Chumlyakov, Y.; Yanushonite, E.; Gerstein, G.; Maier, H. J. (2019): Compressive response of high-strength [001]-oriented single crystals of a Co35Ni35Al30 shape memory alloy,  Journal of Alloys and Compounds 787, 2019, 963-971
DOI: 10.1016/j.jallcom.2019.02.185

Gerstein, G.; Körkemeyer, F.; Dalinger, A.; Zaefferer, S.; Maier, H. J. (2019): Anomalous twinning in AZ 31 magnesium alloy during electrically assisted forming,  Materials Letters 255, 2019, 126516
DOI: 10.1016/j.matlet.2019.126516

Holländer, U.; Wulff, D.; Langohr, A.; Möhwald, K.; Maier, H. J. (2019): Brazing in SiH4-Doped Inert Gases - A New Approach to an Environment Friendly Production Process,  Int. J. of Precis. Eng. and Manuf.-Green Tech. 495, 2019 (1), 187
DOI: 10.1007/s40684-019-00109-1

Johnson, L.; Mahmoudi, M.; Zhang, B.; Seede, R.; Huang, X.; Maier, J. T.; Maier, H. J.; Karaman, I.; Elwany, A.; Arróyave, R. (2019): Assessing printability maps in additive manufacturing of metal alloys,  Acta Materialia 176, 2019, 199-210
DOI: 10.1016/j.actamat.2019.07.005

Julmi, S.; Krüger, A.-K.; Waselau, A.-C.; Meyer-Lindenberg, A.; Wriggers, P.; Klose, C.; Maier, H. J. (2019): Processing and coating of open-pored absorbable magnesium-based bone implants,  Materials Science and Engineering: C 98, 2019, 1073-1086
DOI: 10.1016/j.msec.2018.12.125

Karsten, E.; Gerstein, G.; Golovko, O.; Dalinger, A.; Lauhoff, C.; Krooss, P.; Niendorf, T.; Samsonenko, A.; Maier, H. J. (2019): Tailoring the Microstructure in Polycrystalline Co–Ni–Ga High-Temperature Shape Memory Alloys by Hot Extrusion,  Shap. Mem. Superelasticity 5, 2019 (1), 84-94
DOI: 10.1007/s40830-019-00208-7

Kelly, C. N.; Francovich, J.; Julmi, S.; Safranski, D.; Guldberg, R. E.; Maier, H. J.; Gall, K. (2019): Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering,  Acta Biomaterialia 94, 2019, 610-626
DOI: 10.1016/j.actbio.2019.05.046

Kleer, N.; Julmi, S.; Gartzke, A.-K.; Augustin, J.; Feichtner, F.; Waselau, A.-C.; Klose, C.; Maier, H. J.; Wriggers, P.; Meyer-Lindenberg, A. (2019): Comparison of degradation behaviour and osseointegration of the two magnesium scaffolds, LAE442 and La2, in vivo,  Materialia 8, 2019, 100436
DOI: 10.1016/j.mtla.2019.100436

Kosorukova, T. A.; Gerstein, G.; Odnosum, V. V.; Koval, Y. N.; Maier, H. J.; Firstov, G. S. (2019): Microstructure Formation in Cast TiZrHfCoNiCu and CoNiCuAlGaIn High Entropy Shape Memory Alloys: A Comparison,  Materials 12, 2019 (24)
DOI: 10.3390/ma12244227

Krooß, P.; Lauhoff, C.; Langenkämper, D.; Paulsen, A.; Reul, A.; Degener, S.; Aminforoughi, B.; Frenzel, J.; Somsen, C.; Schmahl, W. W.; Eggeler, G.; Maier, H. J.; Niendorf, T. (2019): Impact of Heating–Cooling Rates on the Functional Properties of Ti–20Ta–5Al High-Temperature Shape Memory Alloys,  Shap. Mem. Superelasticity 5, 2019 (1), 95-105
DOI: 10.1007/s40830-019-00207-8

Niendorf, T.; Lauhoff, C.; Karsten, E.; Gerstein, G.; Liehr, A.; Krooß, P.; Maier, H. J. (2019): Direct microstructure design by hot extrusion – High-temperature shape memory alloys with bamboo-like microstructure,  Scripta Materialia 162, 2019, 127-131
DOI: 10.1016/j.scriptamat.2018.10.051

Panchenko, E. Y.; Timofeeva, E. E.; Chumlyakov, Y. I.; Osipovich, K. S.; Tagiltsev, A. I.; Gerstein, G.; Maier, H. J. (2019): Compressive shape memory actuation response of stress-induced martensite aged Ni51Fe18Ga27Co4 single crystals,  Materials Science and Engineering: A 746, 2019, 448-455
DOI: 10.1016/j.msea.2019.01.004

Panchenko, E.; Timofeeva, E.; Eftifeeva, A.; Osipovich, K.; Surikov, N.; Chumlyakov, Y.; Gerstein, G.; Maier, H. J. (2019): Giant rubber-like behavior induced by martensite aging in Ni51Fe18Ga27Co4 single crystals,  Scripta Materialia 162, 2019, 387-390
DOI: 10.1016/j.scriptamat.2018.12.003

Sajadifar, S. V.; Yapici, G. G.; Demler, E.; Krooß, P.; Wegener, T.; Maier, H. J.; Niendorf, T. (2019): Cyclic deformation response of ultra-fine grained titanium at elevated temperatures,  International Journal of Fatigue 122, 2019, 228-239
DOI: 10.1016/j.ijfatigue.2019.01.021

Schmidt, H. C.; Homberg, W.; Orive, A. G.; Grundmeier, G.; Duderija, B.; Hordych, I.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2019): Joining of blanks by cold pressure welding: Incremental rolling and strategies for surface activation and heat treatment,  Materialwiss. Werkstofftech. 50, 2019 (8), 924-939
DOI: 10.1002/mawe.201900031

Schöler, S.; Schmieding, M.; Yilkiran, D.; Özkaya, F.; Nowak, C.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2019): Wear behavior of selectively oxidized α-Fe2O3 oxide low-friction layer systems on PM tool steel surfaces,  Wear 426-427, 2019, 1603-1615
DOI: 10.1016/j.wear.2019.01.009

Schwarzenböck, E.; Hack, T.; Kolb, M.; Engel, C.; Heidenblut, T.; Maier, H. J. (2019): Evolution of surface characteristics of two industrial 7xxx aluminium alloys exposed to humidity at moderate temperature,  Surface and Interface Analysis 51, 2019 (19), 5775
DOI: 10.1002/sia.6652

Zeller, S.; Baldrich, M.; Gerstein, G.; Nuernberger, F.; Loehnert, S.; Maier, H. J.; Wriggers, P. (2019): Material models for the thermoplastic material behaviour of a dual-phase steel on a microscopic and a macroscopic length scale,  Journal of the Mechanics and Physics of Solids 129, 2019, 205-228
DOI: 10.1016/j.jmps.2019.04.012

Angrisani, G. L.; Taptimthong, P.; Thürer, S. E.; Klose, C.; Maier, H. J.; Wurz, M. C.; Möhwald, K. (2018): Magnetic Properties of Thermal Sprayed Tungsten Carbide-Cobalt Coatings,  Adv. Eng. Mater. 20, 2018 (9), 1800102
DOI: 10.1002/adem.201800102

Bal, B.; Koyama, M.; Canadinc, D.; Gerstein, G.; Maier, H. J.; Tsuzaki, K. (2018): On the Utility of Crystal Plasticity Modeling to Uncover the Individual Roles of Microdeformation Mechanisms on the Work Hardening Response of Fe-23Mn-0.5C TWIP Steel in the Presence of Hydrogen,  J. Eng. Mater. Technol 140, 2018 (3), 31002
DOI: 10.1115/1.4038801

Barton, S.; Reimche, W.; Maier, H.J. (2018): Three-Dimensional Data Storage in the Subsurface Region and Fast Read-Out Technologies for Determining the Mechanical Load History of Components,  HTM 73, 2018 (1), 13-26
DOI: 10.3139/105.110343

Demler, E.; Gerstein, G.; Dalinger, A.; Epishin, A.; Heidenblut, T.; Nürnberger, F.; Maier, H. J. (2018): Influence of High Current-Density Impulses on the Stress-Strain Response and Microstructural Evolution of the Single Crystal Superalloy CMSX-4,  Materials Research 21, 2018 (6), 1063
DOI: 10.1590/1980-5373-MR-2018-0428

Demler, E.; Rodman, D.; Rodman, M.; Gerstein, G.; Grydin, O.; Briukhanov, A. A.; Klose, C.; Nürnberger, F.; Maier, H. J. (2018): The Influence of Alternating Low-Cycle Bending Loads on Sheet Properties Having an Hcp Crystal Lattice,  J. of Materi Eng and Perform 27, 2018 (2), 541-549
DOI: 10.1007/s11665-018-3123-2

Denkena, B.; Breidenstein, B.; Grove, T.; Prasanthan, V.; Overmeyer, L.; Nothdurft, S.; Kaierle, S.; Wallaschek, J.; Twiefel, J.; Ohrdes, H.; Maier, H. J.; Hassel, T.; Mildebrath, M. (2018): Surface integrity of turned laser-welded hybrid shafts,  Prod. Eng. Res. Devel., 2018
DOI: 10.1007/s11740-018-0862-8

Epishin, A.; Petrushin, N.; Nolze, G.; Gerstein, G.; Maier, H. J. (2018): Investigation of the γ′-Strengthened Quaternary Co-Based Alloys Co-Al-W-Ta,  Metall and Mat Trans A 49, 2018 (9), 4042-4057
DOI: 10.1007/s11661-018-4756-3

Gerstein, G.; Firstov, G. S.; Kosorukova, T. A.; Koval, Y. N.; Maier, H. J. (2018): Development of B2 Shape Memory Intermetallics Beyond NiAl, CoNiAl and CoNiGa,  Shap. Mem. Superelasticity 4, 2018 (3), 360-368
DOI: 10.1007/s40830-018-0180-1

Gerstein, G.; Firstov, G.; Chumlyakov, Y.; Krooß, P.; Niendorf, T.; Dalinger, A.; Maier, H. J. (2018): Magnetic pulse controlled microstructure development in Co 49 Ni 21 Ga 30 single crystals,  Materials Science and Technology 34, 2018 (16), 1954-1964
DOI: 10.1080/02670836.2018.1497129

Gerstein, G.; L'vov, V. A.; Kosogor, A.; Maier, H. J. (2018): Internal pressure as a key thermodynamic factor to obtain high-temperature superelasticity of shape memory alloys,  Materials Letters 210, 2018, 252-254
DOI: 10.1016/j.matlet.2017.09.034

Gerstein, G.; L'vov, V. A.; Żak, A.; Dudziński, W.; Maier, H. J. (2018): Direct Observation of Nano-dimensional Internal Structure of Ferromagnetic Domains in the Ferromagnetic Shape Memory Alloy Co-Ni-Ga,  Journal of Magnetism and Magnetic Materials, 2018
DOI: 10.1016/j.jmmm.2018.06.066

Herbst, S.; Maier, H. J.; Nürnberger, F. (2018): Strategies for the Heat Treatment of Steel-Aluminium Hybrid Components,  HTM 73, 2018 (5), 268-282
DOI: 10.3139/105.110368

Julmi, S.; Krüger, A.-K.; Waselau, A.-C.; Meyer-Lindenberg, A.; Wriggers, P.; Klose, C.; Maier, H. J. (2018): Processing and coating of open-pored absorbable magnesium-based bone implants,  Materials Science and Engineering: C 98, 2019, 1073-1086
DOI: 10.1016/j.msec.2018.12.125

Kadletz, P. M.; Motemani, Y.; Iannotta, J.; Salomon, S.; Khare, C.; Grossmann, L.; Maier, H. J.; Ludwig, A.; Schmahl, W. W. (2018): Crystallographic Structure Analysis of a Ti-Ta Thin Film Materials Library Fabricated by Combinatorial Magnetron Sputtering,  ACS combinatorial science 20, 2018 (3), 137-150
DOI: 10.1021/acscombsci.7b00135

Klose, C.; Freytag, P.; Otten, M.; Thürer, S. E.; Maier, H. J. (2018): Thermal Properties of Intermetallic Phases at the Interface of Aluminum-Copper Compound Castings,  Adv. Eng. Mater. 20, 2018 (6), 1701027
DOI: 10.1002/adem.201701027

Langen, D.; Maier, H. J.; Hassel, T. (2018): The Effect of SiC Addition on Microstructure and Mechanical Properties of Gas Tungsten Arc-Welded Ti-6Al-4V Alloy,  J. of Materi Eng and Perform 27, 2018 (1), 253-260
DOI: 10.1007/s11665-017-3091-y

Mildebrath, M.; Maier, H. J.; Hassel, T.; Coors, T.; Pape, F.; Poll, G.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Overmayer, L. (2018): Herstellungsprozess und Wälzfestigkeit von hybriden Hochleistungsbauteilen,  Konstruktion 70, 2018 (9), 84-89 Weitere Informationen

Mohammadi, A.; Koyama, M.; Gerstein, G.; Maier, H. J.; Noguchi, H. (2018): Hydrogen-assisted failure in a bimodal twinning-induced plasticity steel: Delamination events and damage evolution,  International Journal of Hydrogen Energy 43, 2018 (4), 2492-2502
DOI: 10.1016/j.ijhydene.2017.11.177

Nicolaus, M.; Rottwinkel, B.; Alfred, I.; Möhwald, K.; Nölke, C.; Kaierle, S.; Maier, H. J.; Wesling, V. (2018): Future regeneration processes for high-pressure turbine blades,  CEAS Aeronaut J 9, 2018 (1), 85-92
DOI: 10.1007/s13272-017-0277-9

Niendorf, T.; Lauhoff, C.; Karsten, E.; Gerstein, G.; Liehr, A.; Krooß, P.; Maier, H. J. (2018): Direct microstructure design by hot extrusion – High-temperature shape memory alloys with bamboo-like microstructure,  Scripta Materialia 162, 2019, 127-131
DOI: 10.1016/j.scriptamat.2018.10.051

Nothdurft, S.; Springer, A.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L. (2018): Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure,  Journal of Laser Applications 30, 2018 (3), 32417

Panchenko, E.; Eftifeeva, A.; Chumlyakov, Y.; Gerstein, G.; Maier, H. J. (2018): Two-way shape memory effect and thermal cycling stability in Co 35 Ni 35 Al 30 single crystals by low-temperature martensite ageing,  Scripta Materialia 150, 2018, 18-21
DOI: 10.1016/j.scriptamat.2018.02.013

Panchenko, E.; Timofeeva, E.; Eftifeeva, A.; Osipovich, K.; Surikov, N.; Chumlyakov, Y.; Gerstein, G.; Maier, H. J. (2018): Giant rubber-like behavior induced by martensite aging in Ni51Fe18Ga27Co4 single crystals,  Scripta Materialia 162, 2019, 387-390
DOI: 10.1016/j.scriptamat.2018.12.003

Rieck genannt Best, F.; Koch, J.; Lilienkamp, G.; Körkemeyer, F.; Maier, H. J.; Caro, J.; Lange, K. (2018): Spiky Nickel Electrodes for Electrochemical Oxygen Evolution Catalysis by Femtosecond Laser Structuring,  International Journal of Electrochemistry, 2018 (12), 1-12
DOI: 10.1155/2018/9875438

Spachtholz, J.; Affeldt, E. E.; Maier, H. J.; Hammer, J. (2018): The effect of temperature gradients in thermo-mechanical fatigue testing,  Materials at High Temperatures 36, 2018 (2), 97-103
DOI: 10.1080/09603409.2018.1466500

Spachtholz, J.; Affeldt, E. E.; Maier, H. J.; Hammer, J. (2018): Modelling of the fatigue crack growth of a coated single crystalline nickel-based superalloy under thermal mechanical loading,  International Journal of Fatigue 116, 2018, 268-274
DOI: 10.1016/j.ijfatigue.2018.06.015

Toker, S. M.; Gerstein, G.; Maier, H. J.; Canadinc, D. (2018): Effects of microstructural mechanisms on the localized oxidation behavior of NiTi shape memory alloys in simulated body fluid,  J Mater Sci 53, 2018 (2), 948-958
DOI: 10.1007/s10853-017-1586-4

Wolf, L. O.; Cordebois, J.-P.; Rodman, D.; Nürnberger, F.; Maier, H. J. (2018): Effect of Different Intercritical Annealing Treatments without and with Overaging on the Mechanical Material Behavior,  Steel Research Int. 89, 2018 (10), 1800196
DOI: 10.1002/srin.201800196

Żak, A.; Łaszcz, A.; Hasiak, M.; Gerstein, G.; Maier, H. J.; Dudzinski, W. (2018): Ion polishing as a method of imaging the magnetic structures in CoNiGa monocrystal,  Results in Physics 10, 2018, 277-280
DOI: 10.1016/j.rinp.2018.06.020

Almohallami, A.; Arghavani, M.; Böhmermann, F.; Freiße, H.; Herrmann, M.; Mousavi, S. A.; Schöler, S.; Scholz, P.; Tenner, J.; Teller, M.; Umlauf, G.; Wulff, D.; Yilkiran, D.; Maier, H. J. (2017): How dry is dry? - A critical analysis of surface conditions used in dry metal forming,  Dry Met. Forming OAJ FMT 3, 2017, 90-94

Astafurova, E. G.; Moskvina, V. A.; Maier, G. G.; Melnikov, E. V.; Zakharov, G. N.; Astafurov, S. V.; Maier, H. J. (2017): Hydrogen-enhanced Orientation Dependence of Stress Relaxation and Strain-aging in Hadfield Steel Single Crystals,  Scripta Materialia 136, 2017, 101-105
DOI: 10.1016/j.scriptamat.2017.04.028

Astafurova, E.; Maier, G.; Melnikov, E.; Naydenkin, E.; Smirnov, A.; Bataev, V.; Odessky, P.; Dobatkin, S.; Maier, H. J. (2017): The Influence of the Thermomechanical Processing Regime on the Structural Evolution of Mo-Nb-Ti-V Microalloyed Steel Subjected to High-Pressure Torsion,  Metall and Mat Trans A 48, 2017 (7), 3400-3409
DOI: 10.1007/s11661-017-4085-y

Bagehorn, S.; Wehr, J.; Maier, H. J. (2017): Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts,  International Journal of Fatigue 102, 2017, 135-142
DOI: 10.1016/j.ijfatigue.2017.05.008

Gerstein, G.; Besserer, H.-B.; Nürnberger, F.; Barrales-Mora, L. A.; Shvindlerman, L. S.; Estrin, Y.; Maier, H. J. (2017): Formation and growth of voids in dual-phase steel at microscale and nanoscale levels,  Journal of Materials Science 52, 2017 (8), 4234-4243
DOI: 10.1007/s10853-016-0678-x

Gerstein, G.; Clausmeyer, T.; Isik, K.; Nürnberger, F.; Tekkaya, A. E.; Bruchanov, A. A.; Maier, H.J. (2017): Experimental analysis of anisotropic damage in dual-phase steel by resonance measurement,  International Journal of Damage Mechanics 26, 2016 (8), 1147-1169
DOI: 10.1177/1056789516650245

Gerstein, G.; L’vov, V.; Chumlyakov, Y.; Niendorf, T.; Krooß, P.; Dalinger, A.; Heidenblut, T.; Maier, H. J. (2017): Pulsed magnetic field-induced changes in the meso- and nanostructure of Co49Ni21Ga30 martensite,  Funct. Mater. Lett. 10, 2017 (04), 1750044
DOI: 10.1142/S1793604717500448

Herbst, S.; Aengeneyndt, H.; Maier, H. J.; Nürnberger, F. (2017): Microstructure and Mechanical Properties of Friction Welded Steel-Aluminum Hybrid Components after T6 Heat Treatment,  Materials Science and Engineering: A 696, 2017, 33-41
DOI: 10.1016/j.msea.2017.04.052

Kokorin, V. V.; Konoplyuk, S. M.; Dalinger, A.; Maier, H. J. (2017): Influence of martensitic transformation on the magnetic transition in Ni-Mn-Ga,  Journal of Magnetism and Magnetic Materials 432, 2017, 266-270
DOI: 10.1016/j.jmmm.2017.02.008

Leschke, J.; Hecht-Linowitzki, V.; Hassel, T.; Hermsdorf, J.; Kaierle, S.; Overmayer, L.; Maier, H. J. (2017): Laserstrahlschneiden unter Wasser für höhere Produktivität,  Schweißen und Schneiden 69, 2017 (11), 774-780

Maier, H. J.; Karsten, E.; Paulsen, A.; Langenkämper, D.; Decker, P.; Frenzel, J.; Somsen, C.; Ludwig, A.; Eggeler, G.; Niendorf, T. (2017): Microstructural evolution and functional fatigue of a Ti–25Ta high-temperature shape memory alloy,  J. Mater. Res. 32, 2017 (23), 4287-4295
DOI: 10.1557/jmr.2017.319

Mildebrath, M.; Blohm, T.; Hassel, T.; Stonis, M.; Langner, J.; Maier, H. J.; Behrens, B.-A. (2017): Influence of Cross Wedge Rolling on the Coating Quality of Plasma-Transferred Arc Deposition Welded Hybrid Steel Parts,  International Journal of Emerging Technology and Advanced Engineering 7, 2017 (7), 1-7

Mildebrath, M.; Somonov, V.; Nothdurft, S.; Ohrdes, H.; Springer, A.; Kaierle, S.; Hassel, T.:, Maier, H.-J.; Wallascheck, J. (2017): Influence of silicon on the structure and weldability of steel-aluminium joints processed by non-vacuum electron beam welding,  International Journal of Emerging Technology and Advanced Engineering 7, 2017 (9), 348-356

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2017): A Combined Brazing and Aluminizing Process for Repairing Turbine Blades by Thermal Spraying Using the Coating System NiCrSi/NiCoCrAlY/Al,  J Therm Spray Tech 26, 2017 (7), 1659-1668
DOI: 10.1007/s11666-017-0612-z

Nürnberger, F.; Gerstein, G.; Dalinger, A.; Thürer, S. E.; Vinogradov, A.; Feldhoff, A.; Maier, H. J. (2017): Surface modification of an austenitic stainless steel wire by a multi-pulse treatment with a high-power electric current,  Journal of Materials Science 52, 2017 (13), 8007-8015
DOI: 10.1007/s10853-017-1003-z

Otten, M.; Klose, C.; Möhwald, K.; Knödler, P.; Maier, H. J. (2017): Untersuchung der Serientauglichkeit des Schichttransplantationsprozesses zur Herstellung von beschichteten Druckgussbauteilen,  Giesserei Special, 2017 (1), 74-89 Weitere Informationen

Panchenko, E.; Timofeeva, E. E.; Larchenkova, N. G.; Chumlyakov, Y.; Tagiltsev, A. I.; Maier, H. J.; Gerstein, G. (2017): Two-way shape memory effect under multi-cycles in [001]-oriented Ni 49 Fe 18 Ga 27 Co 6 single crystal,  Materials Science and Engineering: A 706, 2017, 95-103
DOI: 10.1016/j.msea.2017.08.108

Reschka, S.; Munk, L.; Wriggers, P.; Maier, H. J. (2017): An EBSD Evaluation of the Microstructure of Crept Nimonic 101 for the Validation of a Polycrystal–Plasticity Model,  J. of Materi Eng and Perform 26, 2017 (12), 6087-6098
DOI: 10.1007/s11665-017-3046-3

Timofeeva, E. E.; Panchenko, E. Y.; Chumlyakov, Y. I.; Maier, H. J.; Gerstein, G. (2017): Peculiarities of high-temperature superelasticity in Ni–Fe–Ga single crystals in compression,  Tech. Phys. Lett. 43, 2017 (3), 320-323
DOI: 10.1134/S1063785017030245

Wolf, L. O.; Nürnberger, F.; Rodman, D.; Maier, H. J. (2017): 1-Step “Quenching and Partitioning” of the Press-Hardening Steel 22MnB5,  Steel Research Int. 88, 2017 (6), 1600307
DOI: 10.1002/srin.201600307

Wolf, L. O.; Nürnberger, F.; Rodman, D.; Maier, H. J. (2017): The Effect of Intercritical Annealing on the Microstructure and Mechanical Properties of Ferritic-Martensitic Two-Phase Steels,  Steel Research Int. 88, 2017 (2), 271-280
DOI: 10.1002/srin.201600107

Yilkiran, D.; Wulff, D.; Almohallami, A.; Özkaya, F.; Bouguecha, A.; Hübner, S.; Möhwald, K.; Maier, H. J.; Behrens, B.-A. (2017): Wear behaviour of thermally oxidised tool surfaces as low-friction separation layers for dry sheet metal forming,  Wear 376-377, 2017, 1789-1803
DOI: 10.1016/j.wear.2017.01.084

Yilkiran, D.; Wulff, D.; Özkaya, F.; Hübner, S.; Holländer, U.; Maier, H. J.; Behrens, B.-A. (2017): Wear Testing of Thermally Oxidised Tool Steel Specimens with α-Fe2O3 Layers,  Dry Met. Forming OAJ FMT 3, 2017, 45-49

Zhao, S.; Seitz, J.-M.; Eifler, R.; Maier, H. J.; Guillory, R. J.; Earley, E. J.; Drelich, A.; Goldman, J.; Drelich, J. W. (2017): Zn-Li alloy after extrusion and drawing: Structural, mechanical characterization, and biodegradation in abdominal aorta of rat,  Materials Science and Engineering: C 76, 2017, 301-312
DOI: 10.1016/j.msec.2017.02.167

Bal, B.; Koyama, M.; Gerstein, G.; Maier, H. J.; Tsuzaki, K. (2016): Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gas,  International Journal of Hydrogen Energy 41, 2016 (34), 15362-15372
DOI: 10.1016/j.ijhydene.2016.06.259

Herbst, S.; Schledorn, M.; Maier, H. J.; Milenin, A.; Nürnberger, F. (2016): Process Integrated Heat Treatment of a Microalloyed Medium Carbon Steel: Microstructure and Mechanical Properties,  J. of Materi Eng and Perform 25, 2016 (4), 1453-1462
DOI: 10.1007/s11665-016-2004-9

Alkan, S.; Chowdhury, P.; Sehitoglu, H.; Rateick, R. G.; Maier, H. J. (2016): Role of nanotwins on fatigue crack growth resistance – Experiments and theory,  International Journal of Fatigue 84, 2016, 28-39
DOI: 10.1016/j.ijfatigue.2015.11.012

Besserer, H.-B.; Dalinger, A.; Rodman, D.; Nürnberger, F.; Hildenbrand, P.; Merklein, M.; Maier, H. J. (2016): Induction heat treatment of sheet-bulk metal-formed parts assisted by water-air spray cooling,  Steel Research Int. 87, 2016 (9), 1220-1227
DOI: 10.1002/srin.201500404

Besserer, H.-B.; Gerstein, G.; Maier, H. J.; Nürnberger, F. (2016): Specimen Preparation by Ion Beam Slope Cutting for Characterization of Ductile Damage by Scanning Electron Microscopy,  Microsc. Res. Tech. 79, 2016 (4), 321-327
DOI: 10.1002/jemt.22633

Besserer, H.-B.; Hildenbrand, P.; Gerstein, G.; Rodman, D.; Nürnberger, F.; Merklein, M.; Maier, H. J. (2016): Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming Processes,  Journal of Materials Engineering and Performance 25, 2016 (3), 1136-1142
DOI: 10.1007/s11665-016-1908-8

Brand, S.; Bauer, M.; Petri, M.; Schrader, J.; Maier, H. J.; Krettek, C.; Hassel, T. (2016): Impact of intraprosthetic drilling on the strength of the femoral stem in periprosthetic fractures: A finite element investigation,  In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 230, 2016 (7), 675-681
DOI: 10.1177/0954411916647078

Bruchwald, O.; Frąckowiak, W.; Reimche, W.; Maier, H. J. (2016): Sensor-controlled bainitic transformation and microstructure formation of forgings during the cooling process,  Mat.-wiss. u. Werkstofftech 47, 2016 (8), 780-788
DOI: 10.1002/mawe.201600612

Eifler, R.; Seitz, J. M.; Weber, C. M.; Grundke, S.; Reifenrath, J.; Kietzmann, M.; Lenarz, T. H.; Maier, H. J.; Klose, C.; Durisin, M. (2016): MgNd2 alloy in contact with nasal mucosa: an in vivo and in vitro approach,  J Mater Sci: Mater Med 27, 2016 (2), 25
DOI: 10.1007/s10856-015-5636-7

Gerstein, G.; Clausmeyer, T.; Isik, K.; Nürnberger, F.; Tekkaya, A. E.; Bruchanov, A. A.; Maier, H. J. (2016): Experimental analysis of anisotropic damage in dual-phase steel by resonance measurement,  International Journal of Damage Mechanics, 2016
DOI: 10.1177/1056789516650245

Herbst, S.; Besserer, H.-B.; Grydin, O.; Milenin, A.; Maier, H. J.; Nürnberger, F. (2016): Holistic consideration of grain growth behavior of tempering steel 34CrNiMo6 during heating processes,  Journal of Materials Processing Technology 229, 2016, 61-71
DOI: 10.1016/j.jmatprotec.2015.09.015

Herbst, S.; Steinke, K. F.; Maier, H. J.; Milenin, A.; Nürnberger, F. (2016): Determination of heat transfer coefficients for complex spray cooling arrangements,  International Journal of Microstructure and Materials Properties 11, 2016 3/4, 229-246
DOI: 10.1504/IJMMP.2016.079149

Holländer, U.; Weber, F.; Möhwald, K.; Maier, H. J. (2016): Entwicklung von Prozessen zum flussmittelfreien Schutzgas-Hartlöten zwischen 650 und 850 °C durch Einsatz silandotierter Prozessgase,  Schweißen und Schneiden 68, 2016 (5)

Hoppe, C.; Ebbert, C.; Grothe, R.; Schmidt, H. C.; Hordych, I.; Homberg, W.; Maier, H. J.; Grundmeier, G. (2016): Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation,  Adv. Eng. Mater. 18, 2016 (8), 1371-1380
DOI: 10.1002/adem.201600085

Hoppe, C.; Ebbert, C.; Voigt, M.; Schmidt, H. C.; Rodman, D.; Homberg, W.; Maier, H. J.; Grundmeier, G. (2016): Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation,  Adv. Eng. Mater. 18, 2016 (6), 1066-1074
DOI: 10.1002/adem.201500501

Hordych, I.; Rodman, D.; Nürnberger, F.; Hoppe, C.; Schmidt, H. C.; Grundmeier, G.; Homberg, W.; Maier, H. J. (2016): Effect of Pre-Rolling Heat Treatments on the Bond Strength of Cladded Galvanized Steels in a Cold Roll Bonding Process,  Steel Research Int. 87, 2016 (12), 1619-1626
DOI: 10.1002/srin.201600021

Isik, K.; Gerstein, G.; Clausmeyer, T.; Nürnberger, F.; Tekkaya, A. E.; Maier, H. J. (2016): Evaluation of Void Nucleation and Development during Plastic Deformation of Dual-Phase Steel DP600,  Steel Research Int. 87, 2016 (12), 1583-1591
DOI: 10.1002/srin.201500483

Isik, K.; Gerstein, G.; Gutknecht, F.; Clausmeyer, T.; Nürnberger, F.; Maier, H. J.; Tekkaya, A. E. (2016): Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punching,  Procedia Structural Integrity 2, 2016, 673-680
DOI: 10.1016/j.prostr.2016.06.087

Isik, K.; Gerstein, G.; Schneider, T.; Schulte, R.; Rosenbusch, D.; Clausmeyer, T.; Nürnberger, F.; Vucetic, M.; Koch, S.; Hübner, S.; Behrens, B.-A.; Tekkaya, A. E.; Merklein, M. (2016): Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming,  Production Engineering 10, 2016 (1), 5-15
DOI: 10.1007/s11740-016-0656-9

Kiliclar, Y.; Demir, O. K.; Engelhardt, M.; Rozgić, M.; Vladimirov, I. N.; Wulfinghoff, S.; Weddeling, C.; Gies, S.; Klose, C.; Reese, S.; Tekkaya, A. E.; Maier, H. J.; Stiemer, M. (2016): Experimental and numerical investigation of increased formability in combined quasi-static and high-speed forming processes,  Journal of Materials Processing Technology 237, 2016, 254-269
DOI: 10.1016/j.jmatprotec.2016.06.007

Krooß, P.; Kadletz, P. M.; Somsen, C.; Gutmann, M. J.; Chumlyakov, Y. I.; Schmahl, W. W.; Maier, H. J.; Niendorf, T. (2016): Cyclic Degradation of Co49Ni21Ga30 High-Temperature Shape Memory Alloy: On the Roles of Dislocation Activity and Chemical Order,  Shap. Mem. Superelasticity 2, 2016 (1), 37-49
DOI: 10.1007/s40830-015-0049-5

Lehmann, R.; Schmidt, H. J.; Costa, B. F. O.; Blumers, M.; Sansano, A.; Rull, F.; Wengerowsky, D.; Nürnberger, F.; Maier, H. J.; Klingelhöfer, G.; Renz, F. (2016): 57Fe Mössbauer, SEM/EDX, p-XRF and μ-XRF studies on a Dutch painting,  Hyperfine Interact 237, 2016 (1)
DOI: 10.1007/s10751-016-1296-3

Lützenkirchen-Hecht, D.; Wulff, D.; Wagner, R.; Holländer, U.; Maier, H. J.; Frahm, R. (2016): Ex-situ and in-situ investigations of thermal anti-oxidation treatments of stainless steels by reflection mode EXAFS,  J. Phys.: Conf. Ser. 712, 2016, 12047
DOI: 10.1088/1742-6596/712/1/012047

Nicolaus, M.; Möhwald, K.; Maier, H. J.; Abrahams, H.; Vogel, F.; Biermann, D. (2016): Geometrisch bestimmte Oberflächenstrukturen zur formschlüssigen Substratanbindung thermisch gespritzter Schichten,  Thermal Spray Bulletin 68, 2016 (1), 54-59

Onal, O.; Gumus, B.; Aksoy, B.; Gerstein, G.; Alaca, B. E.; Maier, H. J.; Canadinc, D. (2016): Micro-Scale Cyclic Bending Response of NiTi Shape Memory Alloy,  Materials Transactions 57, 2016 (3), 472-475
DOI: 10.2320/matertrans.M2015423

Puppa, J.; Dinkel, S.; Behrens, B.-A.; Maier, H. J. (2016): Intelligente Schmiedewerkzeuge – Effizienter Verschleißschutz durch zyklische Randschichthärtung?,  massivUMFORMUNG, 2016 (3), 44-48

Rahim, M. I.; Tavares, A.; Evertz, F.; Kieke, M.; Seitz, J.-M.; Eifler, R.; Weizbauer, A.; Willbold, E.; Maier, H. (2016): Phosphate conversion coating reduces the degradation rate and suppresses side effects of metallic magnesium implants in an animal model,  J. Biomed. Mater. Res., 2016
DOI: 10.1002/jbm.b.33704

Schlobohm, J.; Bruchwald, O.; Frackowiak, W.; Li, Y.; Kästner, M.; Pösch, A.; Reimche, W.; Reithmeier, E.; Maier, H. J. (2016): Turbine blade wear and damage – An overview of advanced characterization techniques,  Materials Testing 58, 2016 (5), 389-394
DOI: 10.3139/120.110872

Taube, A.; Kurtovic, A.; Niendorf, T.; Mertens, T.; Zinn, C.; Schaper, M.; Maier, H. J. (2016): Influence of surface pre-treatments on the high-cycle fatigue behavior of Ti–6Al–4V – From anodizing to laser-assisted techniques,  International Journal of Fatigue 91, 2016, 195-203
DOI: 10.1016/j.ijfatigue.2016.06.010

Uzer, B.; Toker, S. M.; Cingoz, A.; Bagci-Onder, T.; Gerstein, G.; Maier, H. J.; Canadinc, D. (2016): An exploration of plastic deformation dependence of cell viability and adhesion in metallic implant materials,  Journal of the Mechanical Behavior of Biomedical Materials 60, 2016, 177-186
DOI: 10.1016/j.jmbbm.2016.01.001

Vogel, F.; Abrahams, H.; Biermann, D.; Nicolaus, M.; Rodriguez Diaz, M.; Möhwald, K.; Maier, H. J. (2016): Formschlüssige Substratanbindung thermisch gespritzter Schichten durch die Verfahrenskombination Rändelfräsen und Festwalzen,  Werkstoffe in der Fertigung, 2016 (4), 27-28

Yilkiran, D.; Almohallami, A.; Wulff, D.; Hübner, S.; Vucetic, M.; Maier, H.; Behrens, B.-A. (2016): New Specimen Design for Wear Investigations in Dry Sheet Metal Forming,  Dry Met. Forming OAJ FMT 2, 2016, 62-66

Almohallami, A.; Yilkiran, D.; Wulff, D.; Hübner, S.; Vucetic, M.; Maier, H. J.; Behrens, B.-A. (2015): Numerical Modelling of the Tribology of a Selective Oxidised 1.2379 Tool Steel Surface Developed for Dry Metal Forming ,  Dry Met. Forming OAJ FMT 1, 2015; 91-95

Bal, B.; Gumus, B.; Gerstein, G.; Canadinc, D.; Maier, H.J. (2015): On the micro-deformation mechanisms active in high-manganese austenitic steels under impact loading,  Materials Science and Engineering: A, 632; 29-34
DOI: 10.1016/j.msea.2015.02.054

Bruchwald, O.; Frackowiak, W.; Bucquet, T.; Huskic, A.; Reimche, W.; Maier, H. J. (2015): In-situ-Erfassung der Werkstoffumwandlung und Gefügeausbildung von Schmiedebauteilen im Abkühlpfad,  HTM Journal of Heat Treatment and Materials 70 (3), 2015; S. 150-161
DOI: 10.3139/105.110259

Bruchwald, O.; Frackowiak, W.; Reimche, W.; Maier, H. J. (2015): Non-destructive in situ monitoring of the microstructural development in high performance steel components during heat treatment,  La Metallurgia Italiana - International Journal of the Italian Association for Metallurgy 2015 (11/12), 29-37

Chowdhury, P.; Sehitoglu, H.; Abuzaid, W.; Maier, H. J. (2015): Mechanical response of low stacking fault energy Co–Ni alloys – Continuum, mesoscopic and atomic level treatments,  International Journal of Plasticity 71, 2015; 32-61

Durisin, M.; Reifenrath, J.; Weber, C. M.; Eifler, R.; Maier, H. J.; Lenarz, T.; Seitz, J.-M. (2015): Biodegradable nasal stents (MgF 2 -coated Mg-2 wt %Nd alloy)-A long-term in vivo study,  Journal of Biomedical Materials Research Part B: Applied Biomaterials
DOI: 10.1002/jbm.b.33559

Durisin, M.; Seitz, J. M.; Reifenrath, J.; Weber, C. M.; Eifler, R.; Maier, H. J.; Lenarz, T.; Klose, C. (2015): A novel biodegradable frontal sinus stent (MgNd2): a long-term animal study,  European Archives of Oto-Rhino-Laryngology
DOI: 10.1007/s00405-015-3774-7

Gontarenko, A.; Möhwald, K.; Deißer, T. A.; Maier, H. J. (2015): Dry Sliding Wear Behavior and Wear Mechanisms of Thermally Sprayed WCCo-Coatings,  Applied Mechanics and Materials 788, 2015, 143-150
DOI: 10.4028/www.scientific.net/AMM.788.143

Gumus, B.; Bal, B.; Gerstein, G.; Canadinc, D.; Maier, H. J.; Guner, F.; Elmadagli, M. (2015): Twinning activities in high-Mn austenitic steels under high-velocity compressive loading,  Materials Science and Engineering: A 648; 104-112.
DOI: dx.doi.org/10.1016/j.msea.2015.09.045

Hassel, T.; Klett, J.; Kunde, C.; Leuterer, R.; Maier, H. J.; Stuhr, J. (2015): Kraftschlüssiger Spaltausgleich an imperfekten Flanschverbindungen,  Schiff und Hafen 10, 2015; 40-42.

Holländer, U.; Weber, F.; Möhwald, K.; Maier, H. J. (2015): Determination of failure criteria of mechanically and corrosively loaded brazed joints of sheets made of stainless chromium-nickel steel,  Welding and Cutting, 14, 2015 (5), 280-288

Holländer, U.; Weber, F.; Möhwald, K.; Maier, H. J. (2015): Ermittlung von Versagenskriterien mechanisch-korrosiv belasteter Hartlötverbindungen von Blechen aus hochlegiertem nitchtrostendem Chrom-Nickel-Stahl,  Schweißen und Schneiden, 67, 2015 (4), 174-182

Hübsch, C.; Dellinger, P.; Maier, H. J.; Stemme, F.; Bruns, M.; Stiesch, M.; Borchers, L. (2015): Protection of yttria-stabilized zirconia for dental applications by oxidic PVD coating,  Acta Biomaterialia 11, S. 488–493
DOI: 10.1016/j.actbio.2014.09.042

Kadletz, P. M.; Krooß, P.; Chumlyakov, Y. I.; Gutmann, M. J.; Schmahl, W. W.; Maier, H. J.; Niendorf, T. (2015): Martensite stabilization in shape memory alloys – Experimental evidence for short-range ordering,  Materials Letters 159, 2015; S. 16-19.
DOI: 10.1016/j.matlet.2015.06.048

Karaca, H. E.; Acar, E.; Ded, G. S.; Saghaian, S. M.; Basaran, B.; Tobe, H.; Kok, M.; Maier, H.J.; Noebe, R. D.; Chumlyakov, Y. I. (2015): Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy,  Materials Science and Engineering: A 627, S. 82–94
DOI: 10.1016/j.msea.2014.12.111

Kiliclar, Y.; Vladimirov, I. N.; Wulfinghoff, S.; Reese, S.; Demir, O. K.; Weddeling, C.; Tekkaya, A. E.; Engelhardt, M.; Klose, C.; Maier, H. J. (2015): Finite element analysis of combined forming processes by means of rate dependent ductile damage modelling,  International Journal of Material Forming, 2015
DOI: 10.1007/s12289-015-1278-z

Klett, J.; Hassel, T.; Maier, H. J.; Kunde, C.; Leuterer, R.; Stuhr, J. (2015): Friction-locked gap compensation in imperfect flange connections,  Ship & Offshore 6, 2015, 36 - 38.

Knödler, P.; Otten, M.; Möhwald, K.; Maier, H. J.; Freiburg, D.; Peuker, A.; Biermann, D. (2015): Transplantation von thermisch gespritzten Schichten,  Thermal Spray Bulletin 8, 2015 (1), 50-55.

Kokorin, V. V.; Konoplyuk, S. M.; Dalinger, A.; Thürer, S.; Gerstein, G.; Maier, H. J. (2015): Stress-induced resistivity changes in a Ni-Mn-In alloy,  Applied Physics Letters, 2015, 106; 131908.
DOI: 10.1063/1.4917016

Krooß, P.; Niendorf, T.; Kadletz, P. M.; Somsen, C.; Gutmann, M. J.; Chumlyakov, Y. I.; Schmahl, W. W.; Eggeler, G.; Maier, H. J. (2015): Functional Fatigue and Tension–Compression Asymmetry in [001]-Oriented Co49Ni21Ga30 High-Temperature Shape Memory Alloy Single Crystals,  Shape Memory and Superelasticity 1 (1), 2015; 6-17.
DOI: 10.1007/s40830-015-0003-6

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2015): Combined brazing and alitising process for thermally sprayed Ni-based alloys for the repair of turbine blades,  Thermal Spray Bulletin, 2015, 8; S. 56-61.

Niendorf, T.; Krooß, P.; Somsen, C.; Eggeler, G.; Chumlyakov, Y. I.; Maier, H. J. (2015): Martensite aging – Avenue to new high temperature shape memory alloys,  Acta Materialia 89, S. 298-304
DOI: 10.1016/j.actamat.2015.01.042

Niendorf, T.; Krooß, P.; Somsen, C.; Rynko, R.; Paulsen, A.; Batyrshina, E.; Frenzel, J.; Eggeler, G.; Maier, H. J. (2015): Cyclic degradation of titanium–tantalum high-temperature shape memory alloys — the role of dislocation activity and chemical decomposition,  Functional Materials Letters 8, 2015; S. 1550062-1 - 1550062-5
DOI: 10.1142/S1793604715500629

Panchenko, E. Yu; Chumlyakov, Yu I.; Surikov, N. Yu; Maier, H. J.; Gerstein, G.; Sehitoglu, H. (2015): Superelasticity in high-strength heterophase single crystals of Ni51.0Ti36.5Hf12.5 alloy,  Technical Physics Letters 41 (8), 2015; 797-800.
DOI: 10.1134/S1063785015080283

Schmidt. H. S.; Ebbert, C.; Rodman, D.; Homberg, W.; Grundmeier, G.; Maier, H. J. (2015): Investigation of cold pressure welding: cohesion coefficient of copper,  Key Engineering Materials 651-653 (2015), S. 1421-1426
DOI: 10.4028/www.scientific.net/KEM.651-653.1421

T. Niendorf, F. Brenne, P. Hoyer, D. Schwarze, M. Schaper, R. Grothe, M. Wiesener, G. Grundmeier, H.J. Maier (2015): Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications,  Metall. Mater. Trans. A 46, 2015; S. 2829-2833
DOI: 10.1007/s11661-015-2932-2

Timofeeva, E. E.; Panchenko, E. Y.; Chumlyakov, Y. I.; Vetoshkina, N. G.; Maier, H. J. (2015): One-way and two-way shape memory effect in ferromagnetic NiFeGaCo single crystals,  Materials Science and Engineering: A 640, 2015; 465-470
DOI: 10.1016/j.msea.2015.06.024

Vollmer, M.; Krooß, P.; Segel, C.; Weidner, A.; Paulsen, A.; Frenzel, J.; Schaper, M.; Eggeler, G.; Maier, H. J.; Niendorf, T. (2015): Damage Evolution in Pseudoelastic Polycrystalline Co-Ni-Ga High-temperature Shape Memory Alloys,  Journal of Alloys and Compounds 633, 2015; 288-295.
DOI: 10.1016/j.jallcom.2015.01.282

Weber, C. M.; Eifler, R.; Seitz, J.-M.; Maier, H. J.; Reifenrath, J.; Lenarz, T.; Durisin, M. (2015): Biocompatibility of MgF2-coated MgNd2 specimens in contact with mucosa of the nasal sinus – A long term study,  Acta Biomaterialia 18, 2015; 249-261
DOI: 10.1016/j.actbio.2015.03.003

Wulff, D.; Yilkiran, D.; Holländer, U.; Lützenkirchen-Hecht, D.; Wagner, R.; Hübner, S.; Möhwald, K.; Maier, H. J.; Behrens, B.-A. (2015): Selective oxidation of 1.2379 tool steel surfaces: an approach for Dry Metal Forming,  Dry Met. Forming OAJ FMT 1, 2015, 72-78

Ojha, A.; Sehitoglu, H.; Patriarca, L.; Maier, H. J. (2014): Twin Nucleation in Fe-based BCC Alloys - Modeling and Experiments,  Modell. Sim. Mater. Sci. Eng., 22, S. 075010-1 - 075010-21
DOI: 10.1088/0965-0393/22/7/075010

Astafurova, E. G.; Tukeeva, M. S.; Maier, G. G.; Melnikov, E. V.; Maier, H. J. (2014): Microstructure and mechanical response of single-crystalline high-manganese austenitic steels under high-pressure torsion: The effect of stacking-fault energy,  Materials Science and Engineering A., (604), S. 166-175
DOI: 10.1016/j.msea.2014.03.029

Batyrshina, E.; Maier, H. J. (2014): Metalle, die sich erinnern: Mit Formgedächtnis immer in der richtigen Fassung,  Unimagazin 01/02 2014, S. 30-33

Behrens, B.-A.; Maier, H. J.; Bach, F.-W.; Reimche, W.; Mroz, G.; Schrödter, J.; Jocker, J. (2014): A method to detect the level and direction of mechanical forces with the aid of load-induced martensitic phase transformation,  Prod. Eng. Res. Devel., vol 8, 63-72

Biermann, D.; Kirschner, M.; Maier, H. J.; Bach, F.-W.; Möhwald, K.; Schaup, J. (2014): Verbundbohrwerkzeug vereint Eigenschaftsvorteile der Fügepartner, Forum Schneidwerkzeug- und Schleiftechnik,  Forum Schneidwerkzeug- und Schleiftechnik, 2014, 102-109

Biermann, D.; Kirschner, M.; Maier, H. J.; Bach, F.-W.; Möhwald, K.; Schaup, J. (2014): Active brazed ceramic cemented carbide compound drills for machining lamellar graphite cast iron,  Prod. Eng. Res. Devel. (Production Engineering), 2014, vol. 8, 3
DOI: 10.1007/s11740-014-0547-x

Bucquet T.; Reimche, W.; Bruchwald, O.; Frackowiak, W.; Maier, H. J. (2014): EcoForge – Ressourceneffiziente Prozessketten für Hochleistungsbauteile ,  Schmiede Journal (2), S. 22-27

Dietrich, D.; Grittner, N.; Mehner, T.; Nickel, D.; Schaper, M.; Maier, H. J.; Lampke, T. (2014): Microstructural evolution in the bonding zones of co-extruded aluminium/titanium,  J Mater Sci, 2014, vol. 49, 2442-2455
DOI: 10.1007/s10853-013-7912-6

Ebbert, C.; Schmidt, H. C.; Rodman, D.; Nürnberger, F.; Homberg, W.; Maier, H. J.; Grundmeier, G. (2014): Joining with electrochemical support (ECUF): Cold pressure welding of copper,  Journal of Materials Processing Technology, 2014, vol. 214, 2179–2187
DOI: http://dx.doi.org/10.1016/j.jmatprotec.2014.04.015

Fischer, M.; Reimche, W.; Bruchwald, O.; Frackowiak, W.; Maier, H. J. (2014): EcoForge Energieeffiziente Prozesskette zur Herstellung von Hochleistungs-Schmiedebauteilen,  HTM Journal of Heat Treatment and Materials, 69 (4), S. 209-219
DOI: 10.3139/105.110220

Holzweissig, M. J.; Kanagarajah, P.; Maier, H. J. (2014): Digital image correlation at high temperatures for fatigue and phase transformation studies,  The Journal of Strain Analysis for Engineering Design (49), S. 204-211
DOI: 10.1177/0309324713498737

Kokorin, V. V.; Koledov, V. V.; Shavrov, V. G.; Konoplyuk, S. M.; Thürer, S.; Troyanovsky, D. A.; Maier, H. J.; Khovaylo, V. V. (2014): Effect of thermal cycling on the martensitic transformation in Ni-Mn-In alloys,  Journal of Applied Physics, 116; S. 103515
DOI: 10.1063/1.4895585

Krooß, P.; Holzweissig, M. J.; Niendorf, T.; Somsen, C.; Schaper, M.; Chumlyakov, Y. I.; Maier H. J. (2014): Thermal Cycling Behavior of an Aged FeNiCoAlTa Single-crystal Shape Memory Alloy,  Scripta Materialia (81), S. 28–31
DOI: 10.1016/j.scriptamat.2014.02.020

Lützenkirchen-Hecht, D.; Wulff, D.; Wagner, R. ; Frahm, R.; Holländer, U.; Maier, H. J. (2014): Thermal anti-oxidation treatment of CrNi-steels as studied by EXAFS in reflection mode: the influence of monosilane additions in the gas atmosphere of a continuous annealing furnace,  Journal of Material Science, 49, 2014, 5454-5461
DOI: 10.1007/s10853-014-8257-5

Mroz, G.; Reimche, W.; Frackowiak, W.; Bruchwald, O.; Maier, H. J. (2014): Setting Discrete Yield-stress Sensors for Recording Early Component Loading Using Eddy-current Array Technology and Induction Thermography,  Procedia Technology (15), S. 484–493
DOI: 10.1016/j.protcy.2014.09.008

Niendorf, T.; Krooß, P.; Batyrsina, E.; Paulsen, A.; Frenzel, J.; Eggeler, G.; Maier, H. J. (2014): On the functional degradation of binary titanium–tantalum high-temperature shape memory alloys — A new concept for fatigue life extension,  Funct. Mater. Lett.; 2014
DOI: 10.1142/S1793604714500428

Niendorf, T.; Krooß, P.; Batyrsina, E.; Paulsen, A.; Motemani, Y.; Ludwig, A.; Buenconsejo, P.; Frenzel, J.; Eggeler, G.; Maier, H. J. (2014): Functional and structural fatigue of titanium tantalum high temperature shape memory alloys (HT SMAs),  Materials Science and Engineering: A (620), S. 359-366
DOI: 10.1016/j.msea.2014.10.038

Ojha, A.; Sehitoglu, H.; Patriarca, L.; Maier, H. J. (2014): Twin Migration in Fe-based BCC Crystals: Theory and Experiments,  Philosophical Magazine, 2014, vol. 94:16, 1816-1840
DOI: http://dx.doi.org/10.1080/14786435.2014.898123

P. Krooß, C. Somsen, T. Niendorf, M. Schaper, I. Karaman, Y. Chumlykov, G. Eggeler, H. J. Maier (2014): Cyclic Degradation Mechanisms in Aged FeNiCoAlTa Shape Memory Single Crystals,  Acta Materialia 79, S. 126-137
DOI: http://dx.doi.org/10.1016/j.actamat.2014.06.019

Panchenko, E.; Chumlyakov, Y.; Eftifeeva, A.; Maier, H. J. (2014): Two-way Shape Memory Effect in Ferromagnetic Co₃₅Ni₃₅Al₃₀ Single Crystals Aged Under Stress,  Scripta Materialia, 2014, Vol. 90-91, S. 10-13
DOI: 10.1016/j.scriptamat.2014.06.034

Schmidt, H. C.; Rodman, D.; Grydin, O.; Ebbert, C.; Homberg, W.; Maier, H. J.; Grundmeier, G. (2014): Joining with electrochemical support: cold pressure welding of copper – weld formation and characterization,  Advanced Materials Research, 2014, vol. 966-967, 453-460
DOI: 10.4028/www.scientific.net/AMR.966-967.453

Seitz, J-M; Eifler, R.; Weber, C.; Lenarz, T. H.; Maier, H. J.; Durisin, M. (2014): In vivo degradation effects of alloy MgNd2 in contact with mucous tissue,  Journal of biomedical materials research. Part A.
DOI: 10.1002/jbm.a.35382

Toker, S. M; Canadinc, D.; Taube, A.; Gerstein, G.; Maier, H. J. (2014): On the Role of Slip - Twin Interactions on the Impact Behavior of High-Manganese Austenitic Steels,  Mater. Sci. Eng. A., vol. 593, 120–126.

Varahram, A.; Breidenstein, B.; Hassel, T.; Bach, F. -W; Maier, H. J. (2014): New design and construction of expandable casing tubes,  Forschung im Ingenieurwesen 78 (3-4), S. 145-149 Weitere Informationen

Wang, J.; Sehitoglu, H.; Maier, H. J. (2014): Dislocation slip stress prediction in shape memory alloys,  International Journal of Plasticity 54, S. 247–266
DOI: 10.1016/j.ijplas.2013.08.017

Wulf, E.; Bachmann, H.; Möhwald, K.; Eifler, R.; Maier, H. J. (2014): The influence of brazing temperature and surface roughness on the wettability of reactive brazing alloys,  IJMR (International Journal of Materials Research), 2014, vol. 105, 240-248
DOI: 10.3139/146.111022

Abuzaid, W.; Oral, A.; Sehitoglu, H.; Lambros, J.; Maier, H. J. (2013): Fatigue crack initiation in Hastelloy X - the role of boundaries,  Fatigue & Fracture of Engineering Materials & Structures, 2013, 36 (8); 809-826.
DOI: 10.1111/ffe.12048

Chowdhury, P.B; Sehitoglu, H.; Rateick, R.G; Maier, H. J. (2013): Modeling Fatigue Crack Growth Resistance of Nanocrystalline Alloys,  In: Acta Materialia 61, S. 2531–2547

Kanagarajah, P.; Brenne, F.; Niendorf, T.; Maier, H. J. (2013): Inconel 939 Processed by Selective Laser Melting: Effect of Microstructure and Temperature on the Mechanical Properties Under Static and Cyclic Loading,  In: Materials Science and Engineering A 588, S. 188–195.

Karaca, H.E; Saghaian, S.M; Ded, G.; Tobe, H.; Basaran, B.; Maier, H. J.; Noebe, R.D; Chumlyakov, Y.I. (2013): Effects of Nanoprecipitation on the Shape Memory and Material Properties of an Ni-rich NiTiHf High Temperature Shape Memory Alloy,  In: Acta Materialia 61, S. 7422–7431.

Klose, C.; Demminger, C.; Mroz, G.; Reimche, W.; Bach, Fr.-W.; Maier, H. J.; Kerber K. (2013): Influence of Cobalt on the Properties of Load-Sensitive Magnesium Alloys,  In: Sensors 13, S. 106–118. Online verfügbar unter http://www.mdpi.com/1424-8220/13/1/106/.

Kurtovic, A.; Brandl, E.; Mertens, T.; Maier, H. J. (2013): Laser Induced Surface Nano-structuring of Ti-6Al-4V for Adhesive Bonding,  In: Int. J. Adhesion & Adhesives 45, S. 112–117.

Maier, G.G; Astafurova, E.G; Maier, H. J.; Naydenkin, E.V; Raab, G.I; Odessky, P.D; Dobatkin, S.V. (2013): Annealing Behavior of Ultrafine Grained Structure in Low-carbon Steel Produced by Equal Channel Angular Pressing,  In: Mater. Sci. Eng. A 581, S. 104–107

Nicolaus, M.; Möhwald, K.; Bach, Fr.-W.; Maier, H. J. (2013): Wärmebehandlung thermisch gespritzter Ni-Basislote/NiCrAlY-Schichtsysteme zur Reparatur von Turbinenschaufeln,  In: Thermal Spray Bulletin 6 (2), S. 119–123. Online verfügbar unter http://www.thermal-spray-bulletin.info/ index.cfm?objekt=TSPRAY& jahr=2013&ausgabe=2&rubrik=Wissenschaftliche%20Beitr%C3%A4ge.

Pataky, G.J; Sehitoglu, H.; Maier, H. J. (2013): Creep Deformation and Mechanisms in Haynes 230 at 800 °C and 900 °C,  In: J Nuclear Materials 443, S. 484–490.

Patriarca, L.; Abuzaid, W.; Sehitoglu, H.; Maier, H. J. (2013): Slip transmission in bcc FeCr polycrystal,  Materials Science & Engineering A, 588 (2013); 308–317.
DOI: 10.1016/j.msea.2013.08.050

Reimche, W.; Bruchwald, O.; Frackowiak, W.; Bach, Fr.-W.; Maier, H. J. (2013): Non-destructive determination of local damage and material condition in high-performance components,  HTM (HTM Journal of Heat Treatment and Materials), S. 59-67
DOI: 10.3139/105.110176

Schmidt, H.C; Homberg, W.; Grundmeier, G.; Maier, H. J. (2013): Partial Joining of Blanks with Electrochemical Support (ECUF),  In: Key Engineering Materials 554-557, S. 1091–1095.

Seitz, J.-M.; Eifler, R.; Bach, Fr.-W.; Maier H. J. (2013): Magnesium Degradation Products: Effects on Tissue and Human Metabolism,  In: Journal of Biomedical Materials Research Part A. Online verfügbar unter http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.35023/full.

McMahon, R.E; Mab, J.; Verkhoturov, S.V; Munoz-Pinto, D.; Karaman, I.; Rubitschek, F.; Maier, H. J.; Hahn, M.S. (2012): A Comparative Study of the Cytotoxicity and Corrosion Resistance of Nickel--titanium and Titanium-niobium Shape Memory Alloys,  In: Acta Biomaterialia 8, S. 2863–2870

Maier, H. J.; Niendorf, T.; Bürgel, R. (2019): Handbuch Hochtemperatur-Werkstofftechnik. Grundlagen, Werkstoffbeanspruchungen, Hochtemperaturlegierungen und -beschichtungen,  6. Auflage, Springer Vieweg, Wiesbaden, 2019
ISBN: 978-3-658-25313-4

Schnettger, A.; Holländer, U.; Maier, H. J. (2025): Physical-metallurgical investigations for the in-situ production of Al- and Zn based thin films,  24. Werkstofftechnisches Kolloquium 2025, 02-03.04.2025, Chemnitz

Barton, S.; Weiss, M. K.-B.; Steinbrecher, N.; Maier, H. J. (2024): Resource-efficient regeneration by generating a digital component image based on different NDT techniques,  20th World Conference on Non-Destructive Testing, 27.05.-31.05.2024, Incheon, Süd-Korea

Gansel, R.; Zwoch, S.; Quanz, M.; Schäfer, G.; Lohrengel, A.; Maier, H. J.; Barton, S. (2024): Development of an energy-autonomous eddy current sensor system for in-situ component monitoring,  20th World Conference on Non-Destructive Testing, 27.05.-31.05.2024, Incheon, Süd-Korea, e-Journal of Nondestructive Testing, 2024, 1-8
DOI: 10.58286/29942

Gansel, R.; Zwoch, S.; Quanz, M.; Schäfer, G.; Lohrengel, A.; Maier, H. J.; Barton, S. (2024): Entwicklung eines energieautarken Wirbelstromsensorsystems für die in-situ Bauteilüberwachung,  DGZfP – 3. Fachseminar Wirbelstromprüfung, 10.-11.09.2024, Schweinfurt

Hinte, C.; Herbst, S.; Maier, H. J. (2024): Thermo-mechanical Forming of NiTi-related High Entropy Shape Memory Alloys,  MSE 2024, 27.09-29.09.2024, Darmstadt

Nicolaus, M.; Arndt, M.; Wurz, M.; Möhwald, K.; Maier, H. J. (2024): Thermally Sprayed Coatings for Dynamic Data Storage,  Thermal Spray 2024: Proceedings from the International Thermal Spray Conference, 29.04.-01.05.2024, Mailand, Italien
DOI: 10.31399/asm.cp.itsc2024p0034

Quanz, M.; Gansel, R.; Zwoch, S.; Schäfer, G.; Barton, S.; Maier, H. J.; Lohrengel, A. (2024): Development of a load-sensitive splined shaft with sensory material, integrated energy harvesting and wireless data transmission,  Sensor Integrating Machine Elements (SiME) Congress, 19.-20.09.2024, Garching bei München

Quanz, M.; Schäfer, G.; Gansel, R.; Barton, S.; Maier, H. J.; Lohrengel, A. (2024): Auswirkung der Variation des Fußrundungsradius und des Bohrungsdurchmessers in einer sensorintegrierenden Zahn-Hohlwelle auf die Kerbspannungen im Zahnfuß,  Tagungsband zur DMK2024, 14.05.-15.05.2024, Dresden

Rodriguez Diaz, M.; Szafarska, M.; Gustus, R.; Möhwald, K.; Maier, H. J. (2024): A new approach for the application of highly reactive metals,  International Thermal Spray Conference (ITSC) Proceedings, 2024, 278-283, Mailand, Italien
DOI: 10.31399/asm.cp.itsc2024p0278

Weiss, M. K.-B.; Barton, S.; Maier, H. J. (2024): Assessment of hydrogen-induced material degradation using electromagnetic testing technology,  20th World Conference on Non-Destructive Testing, 27.05.-31.05.2024, Incheon, Süd-Korea

Benedde, M.; Nicolaus, M.; Möhwald, K.; Maier, H. J.; Walther, R. (2023): Herstellung dichter Yttriumoxidbeschichtungen durch atmosphärisches Plasmaspritzen als Schutzschichten für die Halbleiterindustrie,  Tagungsband 5. Symposium Materialtechnik, 2023, 810
ISBN: 978-3-8440-9105-2

Brätz, O.; Scheithauer, T.; Hassel, T.; Maier, H. J.; Henkel, K.-M. (2023): Schwingfestigkeit von unter Wasser nass geschweißten Konstruktionsdetails,  DVS-Berichte Band 390, Unterwassertechnik beim DVS CONGRESS, 12-13.09.2023, Essen, 2023, S. 56-67

Fromm, A.; Selmanovic, A.; Gawlytta, R.; Klose, C.; Maier, A. (2023): Charakterisierung von im Kokillenguss hergestellten Aluminium-Kupfer-Verbunden hinsichtlich der Wärmeleitfähigkeit,  In: referierten Tagungsband im Rahmen der CZM-Schriftenreihe „Fortschrittsberichte der Materialforschung und Werkstofftechnik“, 2023, S. 1-11

Gansel, R.; Mlinaric, M.; Hassel, T.; Maier, H. J.; Barton, S. (2023): Erzeugung von künstlichen Rissen mittels der Wasserstrahltechnologie,  DGZfP DACH-Jahrestagung 2023, 15.07.-17.07.2023, Friedrichshafen, 2023, 1-11

Hinte, C.; Gerstein, G.; Herbst, S.; Maier, H. J. (2023): Overcoming Limits of High Entropy Shape Memory Alloys by Thermo-mechanical Forming,  ICHEM 2023, 18.07.-22.07.2023, Knoxville, USA

Nicolaus, M.; Rodriguez Diaz, M.; Möhwald, K.; Maier H.J. (2023): Funktionale thermisch gespritzte Schichten für biomedizinische Anwendungen,  Schriftenreihe Oberflächentechnik, 17. Aachener Oberflächentechnik Kolloquium 2023, 59-71
ISBN: 978-3-8440-9305-6

Rodriguez Diaz, M.; Szafarska, M.; Gustus, R.; Möhwald, K.; Maier, H. J. (2023): Potentiale und Eigenschaften des Lichtbogenspritzens in silandotierten Inertgasen,  Tagungsband 5. Symposium Materialtechnik, 2023, 78-86
DOI: 10.21268/20230711-3

Steinbrecher, N.; Maier, H. J.; Barton, S. (2023): Elektromagnetische Härteprüfung für die Wärmeeinflusszone von Unterwasser-Schweißnähten,  DGZfP DACH-Jahrestagung 2023, 15.07.-17.07.2023. Friedrichshafen, 2023, 1-10

Steinbrecher, N.; Maier, H. J.; Barton, S. (2023): Zerstörungsfreie Bewertung der Härte an Wärmeeinflusszonen von Schweißnähten unterhalb der Wasserlinie,  DVS Berichte 2023, 49-55

Szafarska, M.; Rodriguez Diaz, M.; Boekhoff, C.; Gustus, R.; Möhwald, K.; Maier, H.-J.; Maus-Friedrichs, W. (2023): Advantages of oxygen-free wire-arc sprayed titanium coatings,  DPG-Frühjahrstagung der Sektion Kondensierte Materie, 26.03.-31.03.2023, Dresden

Evers, P.; Gustav, M.; Jakubowitz, E.; Maier, H.J.; Nürnberger, F.; Reulbach, M.; Windhagen, H. (2022): In silico model of inductive heating for tissue-conserving hip and knee arthroplasty removal,  MSE 2022, Darmstadt, 27.09.2022-29.09.2022

Fromm, A.; Maier, H.J.; Klose, C. (2022): Volumetric Characterization of an Aluminum and Copper Composite by X-Ray Microscopy,  MSE 2022, Darmstadt, 27.09.2022-29.09.2022

Gansel, R.; Maier, H. J.; Barton, S. (2022): PoD-Studie für die Wirbelstromprüfung von Ermüdungsrissen an Stumpfnähten,  DGZfP – 2. Fachseminar Wirbelstromprüfung, Schweinfurt, 14.-15.09.2022

H. J. Maier, M. R. Diaz, K. Möhwald, A. Fromm, R. Gawlytta, C. Klose (2022): Sauerstofffreie Produktion in fünf von sechs Fertigungshauptgruppen,  In: T. Königstein, A. W. (Hrsg.): Tagungsband 8. GTV Kolloquium Thermisches Spritzen & Laser Cladding. GTV Verschleißschutz GmbH, Luckenbach, 2022, S. 31-41

Hinte, C.; Gerstein, G.; Maier, H. J. (2022): Microstructure Improvement of High Entropy Shape Memory Alloys by Thermo-mechanical Forming,  MSE 2022, 27.06.-29.09.2022, Darmstadt

Hinte, C.; Gerstein, G.; Maier, H.J. (2022): Microstructure Improvement of High Entropy Shape Memory Alloys by Thermo-mechanical Forming,  MSE 2022, Darmstadt, 27.09.2022-29.09.2022

Holländer, U., Pfeffer, C., Hübner, S., Albracht, L., Möhwald, K., Behrens, B.-A., Maier, H.J. (2022): Nickel-braze coated stainless steel sheets for the production of complex brazed assemblies,  In: LÖT 2022, Proceedings of the 13th International Conference Brazing, High Temperature Brazing and Diffusion Bonding. DVS Berichte Band 381, DVS Media GmbH, Düsseldorf, 2022, 27-31

Holländer, U., Schmieding, M., Möhwald, K., Maier, H.J. (2022): Development of copper-aluminium composite brazing wires for brazing stainless steels,  In: LÖT 2022, Proceedings of the 13th International Conference Brazing, High Temperature Brazing and Diffusion Bonding. DVS Berichte Band 381, DVS Media GmbH, Düsseldorf, 2022, 38-43

Hölscher, L. V.; Hassel, T.; Maier, H. J. (2022): Process Integrated Closed-loop Control in Wire-Arc-Additive- Manufacturing,  IIW 2022 International Conference on Welding and Joining: Innovative Welding and Joining Technologies to achieve Carbon Neutrality and promote Sustainable Development, 2022 (75), 83-86

Huang, J.; Voigt, M.; Wackenrohr, S.; Ebbert, C.; Keller, A.; Maier, H. J.; Grundmeier, G. (2022): Influence of Hydrogel Coatings on Corrosion and Fatigue of Iron in Simulated Body Fluid,  Posterbeitrag, EUROCORR 2022, Berlin, 28.08.2022-01.09.2022

Micolaus, M.; Benedde, M.; Möhwald, K.; Maier, H. J.; Walther, R. (2022): Yttria Coatings as Wear Protection Layer in the Semiconductor Industry,  Thermal Spray 2022: International Proceedings, S 939-944, 04.-06.05.2022, Wien, Österreich
DOI: 10.31399/asm.cp.itsc2022p0939

Nicolaus, M.; Benedde, M.; Walther, R.; Möhwald, K.; Maier, H. J. (2022): Yttria coatings as wear protection layer in the semiconductor industry,  DVS-Berichte, Band 380, DVS Media GmbH, Düsseldorf, S. 939-944

Rodriguez Diaz, M., Szafarska, M.,Nicolaus, M., Möhwald, K., Maier, H. J. (2022): Potentials of thermal spraying processes in silane-doped inert gases,  In: DVS (Hrsg.): Thermal Spray 2022: Proceedings from the International Thermal Spray Conference. Wien. 04.05.2022-06.05.2022. DVS Media, Düsseldorf, 2022, S. 199-204
DOI: 10.31399/asm.cp.itsc2022p0199

Viebranz, V. F.; Hassel, T.; Maier, H. J. (2022): Direct energy deposition additive manufacturing of Fe-Mn-Al-Ni: On the challenges of producing polycrystalline material for the use in damping applications,  MSE 2022, Darmstadt, 27.09.2022-29.09.2022

Wegewitz, L., Bürger, F., Maus-Friedrichs, W., Holländer, U., Möhwald, K., Maier, H.J. (2022): Development of an optical inspection method for evaluating the surface condition of metal surfaces to be brazed,  In: LÖT 2022, Proceedings of the 13th International Conference Brazing, High Temperature Brazing and Diffusion Bonding. DVS Berichte Band 381, DVS Media GmbH, Düsseldorf, 2022, 235-244

Wolf, T.; Brätz, O.; Maier, H. J.; Henkel, K.-M.; Hassel T. (2022): Ermüdungsfestigkeit von nass geschweißten Offshore-Stählen,  In: DVS Berichte (Hrsg.): DVS CONGRESS 2022. 19.09.2022 – 21.09.2022, Koblenz, 2022

Gansel, R.; Maier, H. J.; Zaremba, D. (2021): Inspection concept for the detection of fatigue cracks in welds of offshore structures below the waterline,  WESC 2021 – Wind Energy Science Conference. Virtuelle Konferenz. 25.05.2021 - 28.05.2021.

L. V. Fricke, H. N. Nguyen, B. Breidenstein, H. J. Maier, D. Zaremba (2021): Detektion der deformationsinduzierten martensitischen Umwandlung von metastabilem Austenit in 1.4301 beim kryogenen Drehen mittels Wirbelstromprüfung,  In: DGZfP-Jahrestagung 2021 Zerstörungsfreie Materialprüfung "ZfP in Forschung, Entwicklung und Anwendung". Virtuelle Konferenz. 10.05.2021 - 11.05.2021

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2021): Applikation von Nickel- und Titanbasisloten durch thermisches Spritzen zur Regeneration komplexer Investitionsgüter,  Tagungsband 4. Symposium Materialtechnik. Clausthal-Zellerfeld (virtuell), 2021, 245-253
DOI: 10.21268/20210519-22

Rodriguez Diaz, M., Nicolaus, M., Möhwald, K., Maier, H. J. (2021): Sauerstofffreie Produktion: Von der Vision zur Anwendung,  In: Bobzin, K. (Hrsg.): Schriftenreihe Oberflächentechnik. 15. Aachener Oberflächentechnik Kolloquium 2021. Aachen. Shaker Verlag, Düren, 2021, S. 17-26

Demler, E.; Götze, S.; Herbst, S.; Nürnberger, F.; Maier, H. J.; Ursinus, J.; Büdenbender, C.; Behrens, B.-A. (2020): Casting Manufacturing of Cylindrical Preforms Made of Low Alloy Steels,  In: 23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 445-449
DOI: 10.1016/j.promfg.2020.04.333

Fricke, L. V.; Lehnhardt, B.; Barton, S.; Nguyen, H. N.; Breidenstein, B.; Zaremba, D.; Maier, H. J. (2020): Influence of the Material on the Measurement of Surface Roughness Using Eddy Current Technology,  In: 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). Dubrovnik, Croatia. 25.5.-28.5.2020, S. 1-6
DOI: 10.1109/I2MTC43012.2020.9128881

Hinte, C.; Piorunek, D.; Frenzel J.; Gerstein, G.; Swider M.A.; Eggeler, G.; Maier, H.J. (2020): Functional Properties and Fatigue Behavior of Nickel-Titanium High Entropy Shape Memory Alloys,  ICHEM 2022, 27.09.-01.10.2020, Berlin

Wackenrohr, S.; Bongers, S.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Entwicklung und Analyse der duktilen Schädigung beim Kaltgesenkwalzen,  In: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020. TEWISS, Garbsen, 2020, 27-34

Clausmeyer, T.; Nürnberger, F.; Gutknecht, F.; Isik, K.; Besserer, H.-B.; Gerstein, G.; Wernicke, S.; Schulte, R.; Tekkaya, A.E.; Merklein, M.; Maier, H.J. (2019): Analyse und Modellierung von Schädigung und Versagen in der Blechmassivumformung,  In: Merklein, M.; Behrens, B.-A.; Tekkaya, A.E. (Hrsg.): 4. Workshop Blechmassivumformung. Hannover, 12.03.2019. FAU University Press, Erlangen, 2019, S. 33-60
DOI: 10.25593/978-3-96147-280-2

Kleer, N.; Julmi, S.; Waselau, A. C.; Maier, H. J.; Meyer-Lindenberg, A. (2019): In-vivo Vergleich der Osseointegration und des Degradationsverhaltens der Magnesium-Scaffolds La2 und LAE442,  In: Osteologie 2019. Frankfurt am Main. 28.05.-30.05.19. Georg Thieme Verlag KG, Stuttgart, 2019, S. 50
DOI: 10.1055/s-0039-1679977

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2019): Application of Ni-based filler metal repair coating by thermal spraying for high pressure turbines – A hybrid coating, brazing and aluminizing process,  In: Brazing, high temperature brazing and diffusion bonding - LÖT 2019. Aachen, 21.05.-23.05.2019. DVS Media, Düsseldorf, 2019, S. 71-76

Schmieding, M.; Holländer, U.; Weber, F.; Schmidt, E.; Möhwald, K.; Maier, H. J. (2019): Development an application of thermoplastic-coated particles for joining with powdered brazing alloys,  In: Brazing, high temperature brazing and diffusion bonding - LÖT 2019. Lectures and Posters of the 12th International Conference taking place in Aachen on 21th to 23th May. Aachen. 21.05.-23.05.2019. DVS Media, Düsseldorf, 2019, S. 215-221

Alfred, I.; Nicolaus, M.; Hermsdorf, J.; Kaierle, S.; Möhwald, K.; Maier, H.-J.; Wesling, V. (2018): Advanced high pressure turbine blade repair technologies,  In: 10th CIRP Conference on Photonic Technologies (LANE 2018), Procedia CIRP 74, 2018, S. 214-217
DOI: 10.1016/j.procir.2018.08.097

Eftifeeva A., Panchenko E., Chumlyakov Y., Gerstein G., Maier H. J. (2018): The effects of stress-induced martensite ageing on shape memory behavior in Co35Ni35Al30 single crystals,  ESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018

Firstov G., Kosorukova T., Timoshevskii A., Koval Yu., Odnosum V., Matviychuk Yu., Gerstein G., Maier H. J. (2018): Strategies for high entropy shape memory alloy design - from motivation to structure and properties,  ESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018

Gerstein, G.; Briukhanov, A.; Gutknecht, F.; Volchok, N.; Clausmeyer, T.; Nürnberger, F.; Tekkaya, A. E.; Maier, H. J. (2018): Evaluation of micro-damage by acoustic methods,  In: 17th International Conference on Metal Forming. Metal Forming 2018. Toyohashi, Japan, 16.09. - 19.09.2018, Procedia Manufacturing 15, 2018, S. 527-534
DOI: 10.1016/j.promfg.2018.07.273

Hordych, I.; Rodman, D.; Nürnberger, F.; Schmidt, H. C.; Orive, A. G.; Homberg, W.; Grundmeier, G.; Maier, H. J. (2018): Influence of heat-pretreatments on the microstructural and mechanical properties of galfan-coated metal bonds,  In: Fratini, L. et al. (Hrsg.): Proceedings of the 21st International ESAFORM Conference on Material Forming. ESAFORM 2018. Palermo. AIP Conference Proceedings 1960, 2018 (1), S. 40007
DOI: 10.1063/1.5034861

Klimov, G.; Maier, H-J.; Beniyash, A.; Hassel, T.; (2018): Fluxless Brazing of aluminum alloys using non vacuum electron beam by 60kV acceleration voltage,  Journal of Physics: Conference Series 1109, 2018 Weitere Informationen
DOI: 10.1088/1742-6596/1109/1/011001

Krooß, P.; Lauhoff, C.; Paulsen, A.; Frenzel, J.; Somsen, C.; Langenkämper, D.; Reul, A.; Schmahl, W.; Karsten, E.; Maier, H.; Niendorf, T. (2018): Effect of the heating-cooling rate on the functional properties of Ti-Ta-Al HT-SMAs,  ESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018

Krüger, A. K.; Julmi, S.; Klose, C.; Besdo, S.; Maier, H. J.; Wriggers, P. (2018): Simulation of bone ingrowth into bone substitutes on implant level length scale,  In: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). München. 19.3.- 23.3.2018, Proc. Appl. Math. Mech. 18, 2018 (1), e201800297
DOI: 10.1002/pamm.201800297

Langenkämper, D.; Paulsen, A.; Somsen, C.; Frenzel, J.; Karsten, E.; Maier, H. J.; Eggeler, G. (2018): Synchrotron radiation and transmission electron microscopy investigations on the formation and dissolution temperatures of the w -phase in Ti-Ta high temperature shape memory alloys,  ESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018

Nothdurft, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L.; Kaierle, S. (2018): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloy,  In: International Congress on Applications of Lasers & Electro-Optics, ICALEO 2018. Orlando, Fl. USA. 14.10.-18.10.2018

Panchenko E., Timofeeva E. E., Chumlyakov Y. I., Osipovich K. S., Larchenkova N. G., Pichkaleva M. V., Tokhmetova A. B., Gerstein G., Maier H. J. (2018): Stress-induced martensite ageing in single crystals of Ni-based Heusler alloy: processing, effect of orientation and functional properties,  ESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018

Schmidt, H. C.; Homberg, W.; Orive, A. G.; Grundmeier, G.; Hordych, I.; Maier, H. J. (2018): Cold pressure welding of aluminium-steel blanks: Manufacturing process and electrochemical surface preparation,  In: Fratini, L. et al. (Hrsg.): Proceedings of the 21st International ESAFORM Conference on Material Forming. ESAFORM 2018. Palermo. AIP Conference Proceedings 1960, 2018 (1), S. 50007
DOI: 10.1063/1.5034880

Schöler, S.; Yilkiran, D.; Wulff, D.; Özkaya, F.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2018): Selective oxidation of tool steel surfaces under a protective gas atmosphere using inductive heat treatment,  In: Vollertsen, F. et al. (Hrsg.): 5th International Conference on New Forming Technology, ICNFT 2018. Bremen, 18.09.-21.09.18. MATEC Web Conf. 190, 2018, S. 14003
DOI: 10.1051/matecconf/201819014003

Timofeeva, E.; Panchenko, E.Yu.; Larchenkova, N.G.; Chumlyakov, Yu.I.; Maier, H.J. (2018): Two-way shape memory effect in [001]-oriented Ni49Fe18Ga27Co6 single crystals,  ESOMAT 2018, 11th European Symposium on Martensitic Transformations. Metz, France. 27.08. - 31.08.2018

Barroi, A.; Mildebrath, M.; Hassel, T.; Hermsdorf, J.; Kaierle, S.; Maier, H. J.; Overmeyer, L. (2017): Erzeugung hybrider Umformhalbzeuge durch Auftragschweißen und Evaluierung der Fügezone vor und nach dem Umformen,  In: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 195

Bauer, M.; Brand, S.; Schrader, J.; Krettek, C.; Maier, H. J.; Hassel, T. (2017): Local stress investigation of periprosthetic fractures by total hip replacement - a finite element analysis,  BMTMedPhys 2017. Poster session 11: Modelling and simulation I. Dresden, 10.09. - 13.09.2017, S. 152
DOI: 10.1515/bmt-2017-5032

Bauer, M.; Grünzel, O.; Maier, H. J.; Hassel, T. (2017): Full automatization of waterjet cutting,  WJTA-IMCA Conference & Expo 2017. New Orleans. 24.-27.10.2017

Behrens, B. A.; Maier, H. J.; Hübner, S.; Bonk, C.; Almohallami, A.; Lummer, C.; Schein, P.; Scheland, H.; Micke, M. (2017): Wear Behavior of MoS2 Lubricant Layers During Sheet Metal Forming,  In: Proceedings of the 17th International Conference on Sheet Metal SHEMET17, Procedia Engineering 183, 357-362

Demler, E., Gerstein, G., Dalinger A., Epishin, A., Nürnberger, F., Maier, H. J. (2017): Influence of high-current-density impulses on the plasticity of single crystal nickel-based super alloy CMSX-4,  In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 47

Eifler, R.; Schäfke, F.; Maier, H. J.; Klose, C. (2017): Biocompatible Magnesium Alloy ZNdK100 - Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications,  In: Solanki, K. N. et al. (Hrsg.): Magnesium Technology 2017. Springer International Publishing, 2017, S. 323-327
DOI: 10.1007/978-3-319-52392-7_46

Golovko, O.; Puppa, J.; Paschke, H.; Nürnberger, F.; Rodman, D.; Maier, H. J.; Behrens, B.-A. (2017): Properties Of An Intelligent Hot-Working Tool Steel With Alloy Adapted Nitriding Layers,  In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 49

Jalanesh, M.; Golovko, O.; Gerstein, G.; Hübsch, C.; Hübner, S.; Yarcu, S.; Sezek, O.; Behrens, B.-A.; Rodman, D.; Maier, H. J. (2017): Properties Of Clinched Stainless Steel Sheets As A Result Of Thermal Loading,  In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, S. 47

Julmi S., Klose C., Krüger A.-K., Wriggers P., Maier H.J. (2017): Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants,  In: TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings. Springer International Publishing; Springer, Cham, 2017, S. 307-317
DOI: 10.1007/978-3-319-51493-2_29

Klümper-Westkamp, H.; Vetterlein, J.; Zoch, H.-W.; Reimche, W.; Bruchwald, O.; Maier, H. J. (2017): New bainite sensor technology allows for a detailed view on material transformation,  Proceedings of: Bainite - from nano to macro. Wiesbaden, 01.06. - 02.06.2017, S. 133-140

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2017): Regeneration of High Pressure Turbine Blades. Development of a Hybrid Brazing and Aluminizing Process by means of Thermal Spraying,  The 5th International Conference on Through-Life Engineering Services. Cranfield, England, 01.11.-02.11.2016, Procedia CIRP 59, 2017, 72-76
DOI: 10.1016/j.procir.2016.09.041

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2017): Heat treatment of the thermally sprayed coating system NiCrSi/NiCoCrAlY/Al for repair brazing high pressure turbine blades,  In: ITSC 2017. DVS-Berichte, Band: 336. DVS Media GmbH, Düsseldorf, 2017, S. 462-466

Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Hassel, T.; Maier, H. J.; Ohrdes, H.; Wallaschek, J.; Overmayer, L. (2017): Fügezonenbeeinflussung beim Laserstrahlschweißen von Stahl-Aluminium- Mischverbindungen zur Verbesserung der Umformeigenschaften,  In: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 194

Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Overmeyer, L. (2017): Influence of beam position and ultrasonic amplitude on the micro-structure of laser welded dissimilar steel-steel joints,  In: 36th International Congress on Applications of Lasers & Electro-Optics - ICALEO® 2017. Atlanta, 22.10.-26.10.2017

Reimche, W.; Bruchwald, O.; Barton, S.; Maier, H. J.; Klümper-Westkamp, H.; Zoch, H.-W. (2017): Inline application of bainite sensor technology for characterizing phase transformation during cooling,  Proceedings of: Bainite - from nano to macro. Wiesbaden, 01.06. - 02.06.2017, S. 141-150

Rodriguez Diaz, M.; Möhwald, K.; Loftfield, N.; Kästner, M.; Reithmeier, E.; Knigge, S.; Glasmacher, B.; Maier, H. J. (2017): Transpiring thermally sprayed alumina layers with integrated fluid flow tubes,  In: ITSC 2017. DVS-Berichte, Band: 336. DVS Media GmbH, Düsseldorf, 2017, S. 47-50

Schlobohm, J.; Bruchwald, O.; Frąckowiak, W.; Li, Y.; Kästner, M.; Pösch, A.; Reimche, W.; Maier, H. J.; Reithmeier, E. (2017): Advanced characterization techniques for turbine blade wear and damage,  The 5th International Conference on Through-Life Engineering Services. Cranfield, England, 01.11.-02.11.2016, Procedia CIRP 59, 2017, 83-88
DOI: 10.1016/j.procir.2016.09.005

Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Klose, C.; Behrens, B.-A.; Maier, H. J. (2017): Co-extrusion of semi-finished aluminium-steel compounds,  In: Brabazon, D.; Naher, S.; Ahad, I. U. (Hrsg.): Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. 26-28 April 2017, Dublin, Ireland. AIP Publishing LLC, Melville, New York, 2017, S. 140002
DOI: 10.1063/1.5008158

Wolf, L. O.; Rodman, D.; Nürnberger, F.; Cordebois, J.-P.; Maier, H. J. (2017): Intercritical Annealing – New Heat Treatment Strategies for Tailoring the Stress-Strain Behavior of 22MnB5,  In: Oldenburg, M.; Prakash, B.; Steinhoff, K. (Hrsg.): Hot Sheet Metal Forming of High-Performance Steel CHS2. 6th International Conference, 4-7 June 2017, Atlanta, GA., USA. Verlag Wissenschaftliche Scripten, Auerbach, 2017, S. 433-440

Wulff, D.; Bornmann, B.; Wagner, R.; Holländer, U.; Lützenkirchen-Hecht, D.; Möhwald, K.; Frahm, R.; Maier, H. J. (2017): In-situ examination of Cr-Ni steel surfaces heat treated under N2 by GIXRD,  In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D. (Hrsg.): 13th DELTA User Meeting & Annual Report 2017. Dortmund. 29.11.2017, S. 27-28

Aldag, D.; Varahram, A.; Lehr, J.; Maier, H.; Hassel, T. (2016): Fügen von Casingsegmenten mit dem MIAB-Schweißverfahren für die Anwendung am Bohrturm,  In: DGMK/ÖGEW-Frühjahrstagung des Fachbereiches Aufsuchung und Gewinnung am 21. und 22. April 2016 in Celle. Deutsche Wissenschaftliche Gesellschaft für Erdöl, Erdgas und Kohle e.V, Hamburg, 2016, S. 139-148

Barton, S.; Mroz, G.; Reimche, W.; Maier, H. J. (2016): Inherent Load Measurement and Component Identification by multi-dimensional Coded Data in the Component's Subsurface Region,  In: Procedia Technology. 3rd International Conference on System-Integrated Intelligence. Paderborn. 13.06. - 15.06.2016. Elsevier, Amsterdam, 2016, S. 537-543
DOI: 10.1016/j.protcy.2016.08.067

Bruchwald, O.; Frackowiak, W.; Reimche, W.; Maier, H. J. (2016): In-Situ Monitoring of the Microstructure Evolution,  In: ATZK - Association for the Heat Treatment of Metals (Hrsg.): Proceedings of the European Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications. 10.05. - 13.05.2016, Prague, Czech Republic

Bruchwald, O.; Frackowiak, W.; Reimche, W.; Maier, H. J. (2016): Applications of high frequency eddy current technology for material characterization of thin coatings,  In: K. Bobzin, K.-D. Bouzakis, B. Denkena, H. J. Maier, M. Merklein (Hrsg.): The „A“ Coatings 2016. Conference Proceedings. PZH-Verlag, Garbsen, 2016, S. 37-43

Bruchwald, O.; Frackowiak, W.; Zwoch, S.; Reimche, W.; Maier, H. J. (2016): In-Situ Monitoring of the Microstructure Evolution Using Eddy Current Technology,  Proceedings of the 19th World Conference on Non-Destructive Testing WCNDT, München, 2016
ISBN: 978-3-940283-78-8

Bruchwald, O.; Nicolaus, M.; Frackowiak, W.; Möhwald, K.; Reimche, W.; Maier, H. J. (2016): Material Characterization of Thin Coatings Using High Frequency Eddy Current Technology,  Proceedings of the 19th World Conference on Non-Destructive Testing WCNDT, München, 2016
ISBN: 978-3-940283-78-8

Demminger, C.; Klose, C.; Maier, H. J. (2016): Microstructure and Magnetic Properties of Cobalt and Zinc Containing Magnesium Alloys,  In: Procedia Technology. 3rd International Conference on System-Integrated Intelligence. Paderborn. 13.06. - 15.06.2016. Elsevier, Amsterdam, 2016, S. 35-42
DOI: 10.1016/j.protcy.2016.08.006

Eifler, R.; Durisin, M.; Klose, C.; Lenarz, T.; Maier, H. J. (2016): Degradation of MgF2-Coated and Uncoated MgNd2 Specimens in Contact with Nasal Mucosa,  In: 145. TMS Annual Meeting & Exhebition, Magnesium technology 2016. John Wiley & Sons, Inc., Hoboken, New Jersey, 2016, S. 331-335

F. Weber, U. Holländer, J. Schaup, K. Möhwald, H. J. Maier (2016): Fluxfree brazing of copper based alloys and steels at temperatures between 650 °C and 850 °C in monosilane-doped nitrogen,  In: DVS (Hrsg.): Brazing, high temperature brazing and diffusion bonding - LÖT 2016. Aachen, 07.06. - 09.06.2016. DVS Media, 2016, S. 186-191

Frackowiak, W.; Bruchwald, O.; Reimche, W.; Maier, H. J. (2016): Applications of high frequency induction thermography in themegahertz range for material characterization of turbine components,  In: K. Bobzin, K.-D. Bouzakis, B. Denkena, H. J. Maier, M. Merklein (Hrsg.): The „A“ Coatings 2016. Conference Proceedings. PZH-Verlag, Garbsen, 2016, S. 31-36

Frackowiak, W.; Bruchwald, O.; Zwoch, S.; Reimche, W.; Maier, H. J. (2016): Non-Destructive Damage Detection and Material Characterization of Turbine Components Using Megahertz Range Induction Thermography in Pulsed Mode,  Proceedings of the 19th World Conference on Non-Destructive Testing WCNDT, München, 2016
ISBN: 978-3-940283-78-8

Gerstein, G.; Nürnberger, F.; Maier, H. J. (2016): Evolution of void shape anisotropy in deformed bcc steels,  In: 145. TMS Annual Meeting & Exhebition, Proceedings of the Epd Congress 2016. John Wiley & Sons, Inc., Hoboken, New Jersey, 2016, S. 173-179

Golovko, O.; Puppa, J.; Nürnberger, F.; Rodman, D.; Maier, H. J.; Behrens, B.-A. (2016): Development of intelligent hot forging tools with increased wear resistance by cyclic edge-zone hardening,  In: Proceedings of the 10th TOOL Conference 2016. Bratislava, Slowakei. 04.10. - 07.10.2016, S. 316-325

Hassel, T.; Langen, D.; Maier, H. J. (2016): Gefüge und mechanische Eigenschaften impfbehandelter Schweißnähte an Titan,  In: DVS Congress 2016. Große Schweißtechnische Tagung, Leipzig, 19. und 20. September 2016, S. 49-53
ISBN: 978-3-945023-74-7

Knödler, P.; Otten, M.; Freiburg, D.; Möhwald, K.; Maier, H. J.; Biermann, D. (2016): Transplantation of Micro- and Nanostructured Coatings by Means of Thermal Spraying and PVD,  In: K. Bobzin, K.-D. Bouzakis, B. Denkena, H. J. Maier, M. Merklein (Hrsg.): The „A“ Coatings 2016. Conference Proceedings. PZH-Verlag, Garbsen, 2016, S. 3-11

M. Schmieding, U. Holländer, K. Möhwald, H. J. Maier (2016): Development of copper and nickel based brazing solders with a low brazing and a high remelting temperature,  In: DVS (Hrsg.): Brazing, high temperature brazing and diffusion bonding - LÖT 2016. Aachen, 07.06. - 09.06.2016. DVS Media, 2016, S. 272-277

Schmidt, H. C.; Homberg, W.; Hoppe, C.; Grundmeier, G.; Hordych, I.; Maier, H. J. (2016): Cold pressure welding by incremental rolling: Deformation zone analysis,  In: Chinesta, F.; Cueto, E.; Abisset-Chavanne, E. (Hrsg.): Proceedings of the 19th International ESAFORM Conference on Material Forming: ESAFORM 2016. Nantes, France. 27-29 April 2016. AIP Publishing LLC, Melville, New York, S. 100013

U. Holländer, F. Weber, D. Wulff, K. Möhwald, H.J. Maier, M. Müller, I. Scharf, T. Lampke (2016): Development of a combined brazing-nitriding process for the production of bipolar plates made of chromium coated metal sheets,  In: DVS (Hrsg.): Brazing, high temperature brazing and diffusion bonding - LÖT 2016. Aachen, 07.06. - 09.06.2016. DVS Media, 2016, S. 174-180

Wolf, L.; Nürnberger, F.; Rodman, D.; Boiarkin, V.; Maier, H. J. (2016): Manufacturing of multiphase steel with adapted material properties,  In: Special Workshop Multiscale Modeling of Heterogeneous Structures. 21.-23. Sept. 2016, Dubrovnik, Kroatien

Wolf, L.; Rodman, D.; Maier, H. J.; Nürnberger, F. (2016): Adapted multi-phase microstructures by intercritical annealing and press hardening,  In: Furuhara, T.; Nishida, M.; Miura S. (Hrsg.): The Ninth Pacific Rim International Conference on Advanced Materials and Processing (PRICM9). Kyoto, Japan. 01.-05. Aug. 2016. Wiley-VCH, 2016, S. 295-298

Wulff, D.; Holländer, U.; Lützenkirchen-Hecht, D.; Langohr, A.; Möhwald, K.; Maier, H. J. (2016): Short-time nitridation of electroplated chromium coatings in SiH4-doped N2- atmosphere analysed by GIXRD,  In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D. (Hrsg.): 12th DELTA User Meeting & Annual Report 2016. Dortmund, 30.11.2016, S. 53-54

Yilkiran, D.; Wulff, D.; Almohallami, A.; Holländer, U.; Hübner, S.; Möhwald, K.; Behrens, B.-A., Maier, H. J. (2016): Selectively Oxidised Tool Steel Surfaces for Sheet Metal Forming,  In: K. Bobzin, K.-D. Bouzakis, B. Denkena, H. J. Maier, M. Merklein (Hrsg.): The „A“ Coatings 2016. Conference Proceedings. PZH-Verlag, Garbsen, 2016, S. 179-185
ISBN: 978-3-95900-072-7

Bauer, M.; Grünzel, O.; Zaremba, D.; Maier, H. J.; Hassel, T.; (2015): Spectral measurement of element solubility in water up to 300 MPa,  WJTA-IMCA Conference and Expo, 2.-4. November 2015, New Orleans, Louisiana

Bauer, M.; Müller-Deile, H.; Schilling, T.; Kaufeld, K. T.; Weidling, M.; Wriggers, P.; Haverich, A.; Maier, H. J.; Hassel, T. (2015): Characterisation of native stomach tissue of swine by uniaxial tensile testing,  Biomed Tech 2015, DGBMT, 60 (s1), 108-109
DOI: 10.1515/bmt-2015-5004

Behrens, B.-A.; Maier, H. J.; Nürnberger, F.; Schrödter, J.; Moritz, J.; Wolf, L.; Gaebel C. M. (2015): Hot forming and subsequent cooling outside the press for adjusted tailored properties of 22MnB5 steel sheets,  In: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Hg.): Hot Sheet Metal Forming of High Performance Steel. 5th International Conference Proceedings CHS2. Verl. Wiss. Scripten, Auerbach; S. 35-44.
ISBN: 978-3-95735-023-7

Bruchwald, O.; Frackowiak, W.; Reimche, W.; Maier, H. J. (2015): Sensor-controlled bainitic transformation and microstructure formation of forgings during the cooling process,  In: Zoch, H.-W.; Lübben, T. (Hg.): Proceedings of the 5th International Conference on Distortion Engineering, 2015; S. 319–328.

Bruchwald, O.; Frackowiak, W.; Reimche, W.; Maier, H. J. (2015): Non-destructive in situ monitoring of the microstructural development in high performance steel components during heat treatment,  In: Associazone Italiana di Metallurgia (AIM) (Hg.): Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20.-22.05.2015, Venice, Italy
ISBN: 978-88-98990-03-0

Gerstein, G.; Besserer, H.-B.; Nürnberger, F.; Maier, H. J. (2015): Comparsion of the mechanisms of void formation by plastic deformation in single- and dual-phase bcc-steels,  Proceedings of the TMS 2015 Annual Meeting 2015, Characterization of minerals, metals, and materials, Orlando, Florida, 15.-19.03.2015. Hoboken, New Jersey: John Wiley & Sons, Inc, S. 75–81
DOI: 10.1002/9781119093404.ch9
ISBN: 978-1-119-08246-0

Herbst, S.; Steinke, K. -F; Maier, H. J.; Milenin, A.; Nürnberger, F. (2015): Determination of heat transfer coefficients for complex spray cooling arrangements,  In: Zoch, H.-W.; Lübben, T. (Hg.): Proceedings of the 5th International Conference on Distortion Engineering, 2015; S. 247–256

Hildenbrand, P.; Sieczkarek, P.; Matthias, S.; Löffler, M.; Besserer, H.-B.; Merklein, M.; Tekkaya, A. E.; Reithmeier, E.; Maier, H. J. (2015): Inkrementelles Umformen dünnwandiger Funktionsbauteile unter Einsatz prozessangepasster Halbzeuge durch Verfahren der Blechmassivumformung,  Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Hg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, Dortmund, 26. - 27. Februar. Aachen: Shaker Verlag, S. 149-170
ISBN: 978-3-8440-3434-9

Holländer, U.; Frank, J.; Möhwald, K.; Maier, H. J. (2015): Entwicklung einer korrosions- und verschleißbeständigen Eisenbasisschicht,  In: Wiche, H.; Wesling, V.; Teichmann, C. (Hrsg.): Tagungsband 1. Niedersächsisches Symposium Materialtechnik, 12. bis 13. Februar 2015. Shaker, Herzogenrath, 2015, S. 101-112

Klaas, D.; Wienecke, A.; Wurz, M. C.; Rissing, L.; Freytag, P.; Maier, H. J. (2015): Smart System Integration: Moulding of Magnetic Field Sensors into AlSi9Cu3(Fe)-Alloys,  In: SMTA, Pan Pacific Symposium Conference Proceedings, 2015.

Klose, C.; Demminger, C.; Maier, H. J. (2015): Microstructure and Properties of Cobalt- and Zinc-Containing Magnetic Magnesium Alloys Processed by High-Pressure Die Casting,  In: Manuel, M. V. et al. (Hg.): Magnesium Technology 2015. Proceedings of a symposium sponsored by Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS), 144th Annual Meeting & Exhibition, 15.-19.03.2015, Orlando, Florida. John Wiley & Sons, Inc., Hoboken, New Jersey, 2015; S. 451-454

Knödler, P.; Otten, M.; Möhwald, K.; Maier, H. J.; Freiburg, D.; Peuker, A.; Biermann, D. (2015): Transplantation of Thermal Sprayed Coatings,  ASM International (Hrsg.): Thermal Spray 2015. Proceedings from the International Thermal Spray Conference and Exposition. ASM International, Materials Park, Ohio, 2015; S. 753-755
ISBN: 978-1-62708-093-4

Kokorin, V.V., Konoplyuk, S.M., Dalinger, A., Thürer, S., Gerstein, G., Mashirov, A., Stetskiv, Y.P., Maier, H.J. (2015): Stress-induced transformation on Ni-Mn-In alloy and the concomitant change of resistivity,  10th European Symposium on Martensitic Transformations (ESOMAT 2015), Poster presentation, 14. - 17. September 2015, Antwerpen.

Maier, H. J.; Behrens, B. A.; Wolf, L.; Moritz, J.; Neumann, A.; Diekamp, M.; Gretzki, T.; Rodman, D.; Schrödter, J.; Spiekermeier, S.; Hübner, S.; Nürnberger, F. (2015): Formhärten und Spraykühlung – Potenziale und Anwendungsmöglichkeiten,  In: Merklein, M. (Hrsg.): 10. Erlanger Workshop Warmblechumformung 2015. Meisenbach GmbH-Verlag, Bamberg, 2015, S. 59-78

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2015): Development of a two-stage hybrid Technology for repairing Turbine Blades,  In: ASM International (Hrsg.): Thermal Spray 2015. Proceedings from the International Thermal Spray Conference and Exposition. ASM International, Materials Park, Ohio, 2015; S. 37-40

Nicolaus, M.; Rottwinkel, B.; Möhwald, K.; Nölke, C.; Kaierle, S.; Maier, H. J.; Wesling, V. (2015): Future regeneration processes for high pressure turbine blades,  Deutscher Luft- und Raumfahrtkongress, Rostock, 22.09.-24.09.2015 Weitere Informationen

Reimche, W.; Bruchwald, O.; Frackowiak, W.; Maier, H. J. (2015): Hochleistungsbauteile für den Leichtbau mit sensorkontrollierter Bainitumwandlung aus der Schmiedewärme,  In: Borsutzki, M. (Hrsg.): Fortschritte in der Werkstoffprüfung für Forschung und Praxis. Verl. Stahleisen, Düsseldorf, 2015, S. 221-228

Reimche, W.; Bruchwald, O.; Frackowiak, W.; Maier, H. J. (2015): Sensorkontrollierte Bainitumwandlung aus der Schmiedewärme bei modernen Hochleistungsbauteilen im Leichtbau,  Werkstoffwoche 2015, Dresden, 14. - 17.09.2015

Wulff, D.; Holländer, U.; Lützenkirchen-Hecht, D.; Wagner, R.; Yilkiran, D.; Behrens, B.-A.; Maier, H. J. (2015): Characterisation of selective oxidised steel surfaces by GIXRD,  In: Sternemann, C.; Wagner, R.; Lützenkirchen-Hecht, D. (Hrsg.): 11th DELTA User Meeting & Annual Report 2015, 2015; S. 70-71

Zaremba, D.; Heese, P.; Bauer, M.; Maier, H. J.; Hassel, T. (2015): Particle Disintegration in the Abrasive Water Injection Jet,  WJTA-IMCA Conference and Expo, 2.-4. November 2015, New Orleans, Louisiana

Zeller, S.; Beese, S.; Gerstein, G.; Isik, K.; Löhnert, S.; Nürnberger, F.; Wriggers, P.; Maier, H. J.; Tekkaya, A. E. (2015): Möglichkeiten der simulativen Vorhersage von Temperaturentwicklung und Bauteilversagen infolge plastischer Deformation bei DP600 Bauteilen,  Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Hg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, Dortmund, 26. - 27. Februar. Aachen: Shaker Verlag, S. 113–128

Zimmermann, S.; Schmettlach, S.; Weber, S.; Marques, J.; Forster, G.; Landes, K.; Schein, J.; Lummer, C.; Knödler, P.; Kresnik, S.; Prehm, J.; Möhwald, K.; Maier, H. J. (2015): Homogenization of Coating Properties in Three-Cathode Atmospheric Plasma Spraying by Use of Advanced Diagnostics and Numerical Simulation - Investigations of Suspension Plasma Spraying (SPS),  In: ASM International (Hrsg.): Proceedings from the International Thermal Spray Conference 2015; S. 452-459

Bauer, M.; Eiben, F.; Bach, Fr.-W.; Maier, H. J.; Hassel, T. (2014): New valve technology for AWSJ cutting,  Proceedings of the 22nd International Conference on Water Jetting, Haarlem, Netherlands, 3-5 September 2014, pp. 99-106

Bauer, M.; Hassel, T.; Grünzel, O.; Hinz, C.; Schilling, T.; Kaufeld, K. T.; Bach, Fr.-W.; Maier, H. J.; Haverich, A. (2014): Characterization of native and decellularised aortic tissue by using uniaxial tensile test,  48. Jahrestagung der deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Hannover, 8.-10.10.2014, Biomedical Engineering/Biomedizinische Technik 59 (S1), S.115
DOI: 10.1515/bmt-2014-4509

Böhm, V.; Maier, H. J.; Bach, F.-W.; Reimche, W.; Behrens, B.-A.; Odening, D. (2014): Acoustic process monitoring during transient precision forging of high strengh components,  Ludger Overmeyer und Vyacheslav P. Shkodyrev (Hg.): AST - Symposium on Automated Systems and Technologies. Proceedings, Hannover, 15-16 October 2014. 1. Aufl. Garbsen: TEWISS (Berichte aus dem ITA, 2014, Bd. 4), S. 105–110

Bucquet, T.; Gulpak, M.; Egorov, F.; Garbrecht, M.; Hoja, T.; Hoffmann, F.; Fritsching, U.; Brinksmeier, E; Zoch, H.-W.; Fischer, M.; Dickert, H. H.; Bleck, W; Labanova, N.; Hajyheydari, E.; Felde, A.; Liewald, M.; Huskic, A.; Kazhai, M.; Hadifi, T.; Bouguecha, A.; Behrens, B.-A; Reimche, W.; Bruchwald, O.; Frackowiak, W.; Maier, H. J. (2014): EcoForge - Prozessintegrierte Wärmebehandlung bainitischer Stähle ,  Behrens, B.-A. (Hg.): Tagungsband zum 21. Umformtechnisches Kolloquium Hannover, S. 245-264
ISBN: 978-3-00-045166-9

Demminger, C.; Klose, C.; Taptimthon, P.; Maier, H. J. (2014): Material-inherent data storage using magnetic magnesium-cobalt alloys,  Procedia Technology 5, 2nd International Conference of System-Integrated Intelligence: Challenges for Product and Production Engineering Bremen, 2.-04.07.2014, S. 188-197
DOI: 10.1016/j.protcy.2014.09.071

Durisin, M.; Lenarz, T.; Kanaan, N.; Bach, F.-W.; Angrisani, G. L.; Maier, H. J. (2014): Changes on a platinum electrode surface during acoustic stimulation of a cochlear implant – in vitro approach,  48. Jahrestagung der deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Hannover, 8.-10.10.2014, Biomedical Engineering/Biomedizinische Technik 59 (S1), S. 1144–1147
DOI: 10.1515/bmt-2014-5014

Durisin, M.; Weber, C. M.; Angrisani, N.; Seitz, J. M.; Eifler, R.; Maier, H. J.; Lenarz, T. (2014): Biocompatibility of MgF2-coated MgNd2 alloys in contact with nasal mucosal tissue – in vivo approach,  48. Jahrestagung der deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Hannover, 8.-10.10.2014, Biomedical Engineering/Biomedizinische Technik 59 (S1), S.108
DOI: 10.1515/bmt-2014-5000

Durisin, M.; Weber, C. M.; Reifenrath, J.; Kietzmann, M.; Seitz, J. M.; Eifler, R.; Maier, H. J.; Lenarz, T. (2014): In vivo study of a biodegradable nasal stent (MgF2-coated MgNd2 alloy) in a minipig for up to six months,  48. Jahrestagung der deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Hannover, 8.-10.10.2014, Biomedical Engineering/Biomedizinische Technik 59 (S1), S.1203
DOI: 10.1515/bmt-2014-5014

Eifler, R.; Seitz, J. M.; Klose, C.; Bach, F.-W. (2014): Drawing and Stranding of Magnesium Wires for use as a Resorbable Suture Material,  48. Jahrestagung der deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Hannover, 8.-10.10.2014, Biomedical Engineering/Biomedizinische Technik 59 (S1), S.1186
DOI: 10.1515/bmt-2014-5014

Freiburg, D.; Biermann, D.; Peuker, A.; Kersting, P.; Maier, H. J.; Möhwald, K.; Knödler, P.; Otten, M. (2014): Development and Analysis of Microstructures for the Transplantation of Thermally Sprayed Coatings,  Procedia CIRP Vol. 14, 6th CIRP International Conference on High Performance Cutting, HPC2014, S. 245 -250
DOI: 10.1016/j.procir.2014.03.054

Grittner, N.; Engelhardt, M.; Neumann, A.; Klose, C.; Hübner, S.; Behrens, B.-A.; Maier, H. J. (2014): A novel process for producing large scale Mg-sheets,  Magnesium Technology 2014, TMS (The Minerals, Metals & Materials Society), Wiley Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada, (2014), S. 289-292
ISBN: 978-1-118-88816-2

Hassel, T.; Bauer, M.; Hoyer, P.; Patil, A. J.; Beniash, E.; Bach, F.-W.; Maier, H. J. (2014): Study of magnesium fluoride and self-assembled organosilane coatings of AZ31 and MgCa0.8 alloys,  6th Symposium on Biodegradable Metals, University Politecnico di Milano, Maratea, Italien, 24.-29. August 2014

Holländer, U.; Weber, F.; Möhwald, K.; Maier, H. J. (2014): Entwicklung und Test eines Prüfverfahrens zur Bewertung von Lötverbindungen bei kombinierter mechanisch-korrosiver Belastung,  Tagungsband zum 17. Werkstofftechnischen Kolloquium in Chemnitz, Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen (52), Eigenverlag Chemnitz, S. 164-171
ISBN: 978-3-00-046877-3

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2014): Common application of Ni-based fillermetals and hotgascorrosion protection coatings by means of thermal spraying with subsequent heat treatment for near net shape turbineblade repairing,  In: Bouzakis, K.-D. et al. (Hrsg.): Proceedings / 11th International Conference THE "A" Coatings in Manufacturing Engineering, 1 - 3 October 2014, Thessaloniki, Greece. Ed. Ziti, Thessaloniki, 2014, S. 179-184
ISBN: 978-960-98780-8-1

Reimche, W.; Bruchwald, O.; Frackowiak, W.; Maier, H. J. (2014): Sensorkontrollierte Umwandlung aus der Schmiedewärme zur Prozesssteuerung und Bauteiloptimierung ,  Behrens, B.-A. (Hg.): Tagungsband zum 21. Umformtechnisches Kolloquium Hannover, S. 338
ISBN: 978-3-00-045166-9

Seitz, J-M.; Eifler, R.; Vaughan, M.; Seal, C.; Hyland, M.; Maier, H. J. (2014): Coating Systems for Biodegradable Magnesium Applications,  Magnesium Technology 2014, TMS (The Minerals, Metals & Materials Society), Wiley Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada, (2014), S. 371-374
ISBN: 978-1-118-88816-2

Weidling, M.; Besdo, S.; Schilling, T.; Bauer, M.; Hassel, T.; Bach, Fr.-W.; Maier, H. J.; Haverich, A.; Wriggers, P. (2014): Finite element simulations for development of cardiovascular implants to support biological grafts,  48. Jahrestagung der deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Hannover, 8.-10.10.2014, Biomedical Engineering/Biomedizinische Technik 59 (S1), S.984
DOI: 10.1515/bmt-2014-4422

Zaremba, D.; Wachsmuth, S.; Schneider, P.; Hufenbach, W.; Maier, H. J.; Hassel, T. (2014): Method for the material-specific repair preparation of carbon fiber reinforced plastic structures,  Proceedings of the 22nd International Conference on Water Jetting, Haarlem, Netherlands, 3-5 September 2014, pp. 45-56.

Dellinger, P.; Möhwald, K.; Maier, H. J.; Bach, Fr.-W. (2013): Nano and Micro Structuring of PVD Surfaces by Using the Thin Film Transplantation Technology,  9th Asian-European International Conference on Plasma Surface Engineering (AEPSE 2013), Jejo (Korea), 25-30.08.2013

Frąckowiak, W.; Bruchwald, O.; Reimche, W.; Bach, F.-W.; Maier, H. J. (2013): High Frequency Eddy-Current and Induction Thermography Inspection Techniques for Turbine Components,  In: 18th International Workshop on Electromagnetic Non-destructive Evaluation (ENDE). Bratislava, SK, 25.-28.06.2013.
ISBN: 978-80-554-0713-5

Freytag, P.; Kerber, K.; Maier, H. J. (2013): Nutzung von Beschichtungen aus Zinklegierungen zur Steigerung der Wärmeleitfähigkeit beim Verbundguss von Kupfer und Aluminium im Druckgussprozess,  In: Verbundwerkstoffe. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde (A. Wanner und K. A. Weidemann (Hg.)), Karlsruher Institut für Technologie (KIT), 2013, S. 9

Klose, C.; Demminger, C.; Maier, H. J. (2013): Sensorische Werkstoffe - Erfassen und Nutzen mechanischer Beanspruchungsdaten im Lebenszyklus gentelligenter Bauteile,  In: 8. Aachener Oberflächentechnik Kolloquium 2013. Herzogenrath (K. Bobzin (Hg.)), Shaker, 2013, S. 59–66

Klose, C.; Demminger, C.; Zwoch, S.; Reimche, W.; Bach, Fr.-W; Maier, H. J.; Kerber, K. (2013): Measurement of static and dynamic loads utilizing sensory magnesium components,  In: Euro Intelligent Materials 2013 (E. Quandt und C. Selhuber-Unkel (Hg.)), DGM, 2013, S. 57

Knödler, P.; Peuker, A.; Erne, M.; Maier, H. J.; Möhwald, K.; Biermann, D.; Kerber, K.; Otten, M. (2013): Transfer of Micro-structures by Transplantation of Thermal Sprayed Coatings,  In: Proceedings of the 10th International Conference THE “A“ Coatings (K.-D. Bouzakis, K. Bobzin, B. Denkena und M. Merklein (Hg.)), Shaker, Aachen, 2013, S. 193–204

Langohr A.; Swider M.A; Möller F.; Wulf E.; Möhwald K.; Hassel T.; Maier H. J. (2013): Development of flux free filler metals and processes for brazing of aluminum,  In: Brazing, high temperature brazing and diffusion bonding. LÖT 2013, lectures and posters of the 10th international conference taking place in Aachen on 18th to 20th June 2013. Als Ms. gedr. Düsseldorf: DVS Media (DVS-Berichte, 293), 2013, S. 205–211

Liewald, M.; Hajyheydari, E.; Felde, A.; Fritsching, U.; Hinrichs, B.; Bucquet, T.; Fischer, M.; Dickert, H.; Bleck, W.; Behrens, B.-A.;Bouguecha, A.; Hadifi, T.; Huskic, A.; Kazhai, M.; Egorov, F.; Brinksmeier, E.; Maier, H.J.; Reimche, W.; Bruchwald, O.; Frackowiak, W. (2013): EcoForge – Resource-efficient process chains for high-performance components,  Liewald (Hg.): Tagungsband Neuere Entwicklungen in der Massivumformung, Fellbach, 4. - 5.6.2013, S. 117–147
ISBN: 978-3-88355-395-5

Otten, M.; Möhwald, K.; Kerber, K.; Erne, M.; Knödler, P.; Maier, H. J.; Biermann, D.; Zabel, A.; Peuker, A. (2013): Untersuchung der mikro- und makroskopischen Abbildungsgenauigkeit von im Schichttransplantationsprozess übertragenden Oberflächenbeschichtungen,  In: Verbundwerkstoffe. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde (A. Wanner und K. A. Weidemann (Hg.)), Karlsruher Institut für Technologie (KIT), 2013, S. 10

Reimche, W.; Bruchwald, O.; Frackowiak, W.; Bach, F.-W.; Maier, H. J. (2013): Sensorkontrollierte Umwandlung von Hochleistungsbauteilen aus der Schmiedewärme,  In: Christ, H.-J. (Hrsg.): Tagung Werkstoffprüfung – Fortschritte in der Werkstoffprüfung für Forschung und Praxis, 28.11.-29.11. 2013, Neu-Ulm, S. 271-277
ISBN: 978-3-514-00806-9

Birr, C.; Reimche, W.; Maier, H.J; Bach, Fr.-W.; Olfermann, T.; Matzke, M.; Meschut, G.; Hahn, O.; Ahnert, M.; Broschwitz, E.; Kraus, C.; Neugebauer, R. (2012): Lokale Konditionierung von presshartem Vergütungsstahl für das Hybridfügen von Mischbaustrukturen,  In: FOSTA-EFB-DVS (Hg.): Gemeinsame Forschung in der Mechanischen Fügetechnik. 2. Fügetechnisches Gemeinschaftskolloquium 2012, S. 59–71.

Nicolaus, M.; Möhwald, K.; Maier, H. J. (2024): Near Net Shape Turbine Blade Repair Using a Joining and Coating Hybrid Process,  Regeneration of Complex Capital Goods, 1. Auflage, Springer, Cham, 2025
DOI: 10.1007/978-3-031-51395-4_7

Besserer, H.-B.; Nürnberger, F.; Maier, H. J. (2021): Fatigue Behavior of Sheet-Bulk Metal Formed Components,  In: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Hrsg.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020. Springer, Cham, 2021, S. 412-433
DOI: 10.1007/978-3-030-61902-2_18

Gutknecht, F.; Gerstein, G.; Isik, K.; Tekkaya, A. E.; Maier, H. J.; Clausmeyer, T.; Nürnberger, F. (2021): Analysis of Path-Dependent Damage and Microstructure Evolution for Numerical Analysis of Sheet-Bulk Metal Forming Processes,  In: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Hrsg.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020. Springer, Cham, 2021, S. 378-411
DOI: 10.1007/978-3-030-61902-2_17

Heimes, N.; Uhe, J.; Thürer, S. E.; Wester, H.; Maier, H. J.; Klose, C.; Behrens, B.-A. (2021): Numerical Development of a Tooling System for the Co-extrusion of Asymmetric Compound Profiles on a Laboratory Scale,  In: Behrens, B.-A. et al. (Hrsg.): Production at the leading edge of technology. WGP2020, Dresden, 23.09.-24.09.2020. Springer, Berlin, 2021, S. 66-75
DOI: 10.1007/978-3-662-62138-7_7

Wackenrohr, S.; Nürnberger, F.; Maier, H. J. (2021): Fatigue Life Compliant Process Design for the Manufacturing of Cold Die Rolled Components,  In: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Hrsg.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020. Springer, Cham, 2021, S. 568-585
DOI: 10.1007/978-3-030-61902-2_26

Brosius, A.; Steinfelder, C.; Maier, H. J.; Herbst, S.; Barienti, K. (2020): Erweiterung der Prozessgrenzen bei der Weiterverarbeitung von gewalztem Halbzeug durch Analyse der Ursache-Wirkungs-Beziehungen beim Planrichten,  Europäische Forschungsgesellschaft für Blechverarbeitung e.V, Hannover, 2020
ISBN: 978-3-86776-579-4

Hordych, I.; Herbst, S.; Nürnberger, F.; Boiarkin, V.; Hubert, O.; Maier, H. J. (2020): Manufacturing and Virtual Design to Tailor the Properties of Boron-Alloyed Steel Tubes,  In: Wriggers, P.; Allix, O.; Weissenfels, C. (Hrsg.): Virtual Design and Validation. Lecture Notes in Applied and Computational Mechanics 93. Springer, Cham, 2020, S. 21-44

Barton, S.; Mroz, G.; Reimche, W.; Maier, H. J. (2017): Storing the load history of a component in the subsurface region,  In: Denkena, B.; Mörke, T. (Hrsg.): Cyber-physical and gentelligent systems in manufacturing and life cycle. Elsevier, London, 2017, S. 67-84
ISBN: 978-0-12-811939-6

Barton, S.; Mroz, G.; Reimche, W.; Maier, H. J. (2017): Data storage within the subsurface of a component by local heat treatment,  In: Denkena, B.; Mörke, T. (Hrsg.): Cyber-physical and gentelligent systems in manufacturing and life cycle. Elsevier, London, 2017, S. 85-99

Schilling, T.; Bauer, M.; LaLonde, L.; Maier, H. J.; Haverich, A.; Hassel, T. (2017): Cardiovascular Applications of Magnesium Alloys,  In: Aliofkhazraei, M. (Hrsg.): Magnesium Alloys. InTech, Rijeka, Croatia, 2017, S. 191-217
DOI: 10.5772/66182

Knödler, P.; Bathe, T.; Möhwald, K.; Maier, H. J.; Biermann, D. (2016): Verfahren und Methoden zur Transplantation thermisch gespritzter Schichten für Druckgussteile,  In: Biermann, D. (Hrsg.): Spanende Fertigung. Prozesse, Innovationen, Werkstoffe. Vulkan, Essen, 2016, S. 88-93
ISBN: 978-3-8027-2989-8

Weidling, M.; Besdo, S.; Schilling, T.; Bauer, M.; Hassel, T.; Bach, F.-W.; Maier, H. J.; Lamon, J.; Haverich, A.; Wriggers, P. (2015): Development of Magnesium Alloy Scaffolds to Support Biological Myocardial Grafts: A Finite Element Investigation,  Lenarz, T.; Wriggers, P. (Hg.): Biomedical Technology, Publishing Lecture Notes in Applied and Computational Mechanics 74, Springer International Publishing, Switzerland, S. 81-100
DOI: 10.1007/978-3-319-10981-7_6
ISBN: 978-3-319-10980-0

Bach, Fr.-W.; Möhwald, K.; Erne, M.; Hübsch, C.; Maier, H. J. (2014): Microstructured thermally sprayed surfaces,  B. Denkena, A. Rienäcker, G. Knoll, F.-W. Bach, H. J. Maier, E. Reithmeier und F. Dinkelacker (Hg.): Microstructuring of thermo-mechanically highly stressed surfaces. Final report of the DFG Research Group 576, Springer-Verlag, Heidelberg New York Dordrecht London, S. 58–92