Leibniz Universität Hannover Faculty Faculty of Mechanical Engineering
Deutsch Contact Deutsch
Institute of Materials Science
 
Institute for Material Science Institute Work Groups

Tensile, Compression and Flexure Testing

Tensile testing according to DIN EN ISO 6892-1 is used to determine static material parameters such as tensile strength, yield strength and elongation. Almost all sample geometries of DIN 50125 can be tested on the universal testing machines in our facility within a load range between 1kN and 250kN and at temperatures between -80 and +250°C. Compression and flexure tests at different environmental conditions can also be performed.

Read more ...

Tensile testing according to DIN EN ISO 6892-1 is used to determine static material parameters such as tensile strength, yield strength and elongation. Almost all sample geometries of DIN 50125 can be tested on the universal testing machines in our facility within a load range between 1kN and 250kN and at temperatures between -80 and +250°C. Compression and flexure tests at different environmental conditions can also be performed.

CONTACT PERSON FOR THE MATERIALS TESTING AND METALLOGRAPHY DIVISION

Dr.-Ing. Mark Alan Swider
Room Coordinators
Phone
+49 511 762 9839
Email
swidermaschinenbau.uni-hannover.de
Address
An der Universität 1
30823 Garbsen
Building
8130
Room
006
Dr.-Ing. Mark Alan Swider
Room Coordinators
Phone
+49 511 762 9839
Email
swidermaschinenbau.uni-hannover.de
Address
An der Universität 1
30823 Garbsen
Building
8130
Room
006

Last Change: 16.02.24 Print

Contact us
Contact