Dr.-Ing. Christian Klose

anthur, F.-L.; Seffer, S.; Hermsdorf, J.; Barienti. K.; Heimers, H.; Steinhoff, T.; Nürnberger, F.; Klose, C.; Herbst, S.; Maier, H. J.; Kuhr, L.; Raumel, S.;Wurz, M.; Gerland, S.; Raatz, A.; Zimmermann, S.; Bürger, F.; Gustus, R.; Maus-Friedrichs, W.; Overmeyer, L (2026): Nanosecond-pulsed laser ablation as a universal method for oxide removal and surface structuring of aluminum and copper for advanced manufacturing applications,  Applied Surface Science Advances, 2026, 34, 101018
DOI: 10.1016/j.apsadv.2026.101018

Friedrich, L.-O.; Stegmann, J.; Guissem, O.; Hinz, L.; Mevert, J.; Klose, C.; Maier, H. J.; Seewig, J. (2026): Towards the measurement of porous materials: a comparison between computed X-ray tomography and serial sectioning,  Prod. Eng. Res. Devel. 2025, 20, 1, 34
DOI: 10.1007/s11740-025-01408-0

Frolov, Y.; Bobukh, O.; Klose, C.; Nürnberger, F.; Maier, H. J. (2026): Solid-State Diffusion and Intermetallic Phase Formation in Roll-Bonded Mg–Zn Composites With Kirigami-Patterned Inlay,  Advanced Engineering Materials, 2026, e202502977
DOI: 10.1002/adem.202502977

Mevert, J; Schäfke, F. P.; Irmler, H.; Maier, H. J.; Klose, C. (2026): Powder-based porous materials for additive manufacturing: alloy design and custom atomization process,  Int. J. Adv. Manuf. Technol., 2026
DOI: 10.1007/s00170-026-19106-1

Schleich, J.-T.; Siegmund, J. M. J.; Phan, M. T.; Pott. P.-C.; Maier, H. J.; Klose, C. (2026): Co-extrusion of internally oxidized Nb-1Zr: An avenue to new load-bearing implants,  Manufacturing Letters, 2026, 47, 74–77
DOI: 10.1016/j.mfglet.2026.02.003

Schlüter, A.; Harbusch, S.; Mevert, J.; Triebe, A.; Kerscher, E.; Schäfke, F. P.; Klose, C.; Maier, H. J.; Blinn, B.; Beck, T.; Müller, R. (2026): Experimental and simulation-based characterization of the elastic material behavior of powder metallurgically produced AlSi10Mg foams,  Prod. Eng. Res. Devel. 2026, 20
DOI: 10.1007/s11740-025-01403-5

Steinhoff, T.; Janthur, F.-L.; Zimmermann, S.; Seffer, S.; Hermsdorf, J.; Gustus, R.; Overmeyer, L.; Maus-Friedrichs, W.; Maier, H. J.; Klose, C. (2026): Al–Cu Composite Casting of Laser-Deoxidized Copper: Bonding, Interfacial Chemistry, and Thermal Conductivity,  Advanced Engineering Materials, 2026, e202502800
DOI: 10.1002/adem.202502800

Verschinin, A.; Schäfke, F. P.; Mohnfeld, N.; Maier, H. J.; Uhe, J.; Klose, C.; Barton, S. (2026): Detection of Charge Welds in Lateral Angular Co-Extrusion Using Non-Destructive Testing,  Key Engineering Materials, 2026, 1048, 121-132
DOI: 10.4028/p-TXaD32

Abel, A.; Breitbach, E. J.; Holländer H.; Müller, M.; Griemsmann, T.; Klose, C.; Hermsdorf, J.; Maier H. J.; Kaierle S.; Overmeyer, L. (2025): Influence of a Hydrogen Addition to the Inert Gas and Subsequent Heat Treatments on the Microstructure and Mechanical Properties of Magnesium WE43 Fabricated by PBF-LB/M,  Adv. Eng. Mater. 2025, 2402704
DOI: 10.1002/adem.202402704

Blank, T.; Behrens, S.; Lange, E. L.; Klose, C.; Canadinc, D.; Durisin, M.; Lenarz, T.; Maier, H. J. (2025): The influence of microstructure on the corrosion behavior of platinum used for cochlea implant electrodes,  Corros. Sci. 246, 2025, 112745
DOI: 10.1016/j.corsci.2025.112745

Breitbach, E. J.; Julmi, S.; Behrens, S.; Blank, T.; Abel, A.; Emminghaus, N.; Overmeyer, L.; Klose, C.; Maier, H. J. (2025): Development of Ternary Magnesium Alloys for Laser Powder Bed Fusion: Optimizing Oxide Layer Thickness,  Adv. Eng. Mater. 2025, 27, 2401322
DOI: 10.1002/adem.202401322

Mohnfeld, N.; Dewidar, A.; Qarbi, K.; Wester, H.; Schäfke, F. P.; Verschinin, A.; Maier, H. J.; Barton, S.; Klose, C.; Uhe, J. (2025): Non‐Destructive and Mechanical Characterization of the Bond Quality of Co‐Extruded Titanium‐Aluminum Profiles,  Adv. Eng. Mater. 2025, 27, 2401716
DOI: 10.1002/adem.202401716

Nazarahari, A.; Blank, T.; Hinte, C.; Ozdemir, H. C.; Barienti, K.; Klose, C.; Canadinc, D.; Maier, H. J. (2025): Exploring Microstructure–Physical Property–Corrosion Response Relationship in Intermetallic Compounds of Al-Cu Bimetallic Interfaces,  Adv. Eng. Mater. 2025, 202501357
DOI: 10.1002/adem.202501357

Pott, P. C.; Petsa, K.; Klose, C.; Schleich, J. T.; Brümmer, N.; Winkel, A.; Maier, H. J.; Stiesch, M. (2025): Load-bearing capacity of an experimental dental implant made of Nb-1Zr,  Journal of materials science. Materials in medicine, 2025, 36, 12
DOI: 10.1007/s10856-025-06858-7

Timmann, F.; Schäfke, F. P.; Hürkamp, A.; Wacker, C.; Klose, C.; Maier, H. J.; & Dröder, K. (2025): Bond strength analysis in additive manufacturing of polymer structures on aluminium foam.,  International Journal of Advanced Manufacturing Technology, 2025, 137, 4537-4555
DOI: 10.1007/s00170-025-15326-z

Blank, T.; Ahrens, A. M.; Klose, C.; Canadinc, D.; Lenarz, T.; Maier, H. J. (2024): Investigating mechanical deformation’s role in cochlear implant durability,  PLOS ONE, 19, 2024, 0306613
DOI: 10.1371/journal.pone.0306613

Blank, T.; Behrens, S.; Klose, C.; Maier, H. J. (2024): Surface Roughness-Dependent Corrosion: Implications for Cochlear Implant Reliability,  Current Directions in Biomedical Engineering, 2024, 10, 91-94
DOI: 10.1515/cdbme-2024-2022

Breitbach, E. J.; Julmi, S.; Behrens, S.; Blank, T.; Abel, A.; Emminghaus, N.; Overmeyer, L.; Klose, C.; Maier, H. J. (2024): Development of Ternary Magnesium Alloys for Laser Powder Bed Fusion: Optimizing Oxide Layer Thickness,  Adv. Eng. Mater., 2024, 2401322
DOI: 10.1002/adem.202401322

Brümmer, N.; Klose, C.; Schleich, J.-T.; Maier, H. J.; Eisenburger, M.; Stiesch, M.; Pott, P.-C. (2024): Shear bond strength between dental adhesive systems and an experimental niobium-based implant material,  J. Mater. Sci.: Mater. Med. 2024, 35, 65

Mohnfeld, N.; Dewidar, A.; Qarbi, K.; Wester, H.; Schäfke, F. P.; Verschinin, A.; Maier, H. J.; Barton, S.; Klose, C.; Uhe, J. (2024): Non-Destructive and Mechanical Characterization of the Bond Quality of Co-Extruded Titanium-Aluminum Profiles,  Adv. Eng. Mater. 2024, 2401716
DOI: 10.1002/adem.202401716

Schleich, J.-T.; Hahn, L.; Pott, P.-C.; Maier, H. J.; Klose, C. (2024): Co-extrusion of Nb–1Zr Powder for the Production of a Biocompatible High-Strength Material for Dental Implants,  Adv. Eng. Mater., 2024, 2401436
DOI: 10.1002/adem.202401436

Fromm, A. C.; Kahra, C.; Selmanovic, A.; Maier, H. J.; Klose, C. (2023): An X-ray Microscopy Study of the Microstructural Effects on Thermal Conductivity in Cast Aluminum-Copper Compounds,  Metals 13, 2023 (4), 671
DOI: 10.3390/met13040671

Maier, H. J.; Gawlytta, R.; Fromm, A.; Klose, C. (2023): Increasing thermal conductivity in aluminium-copper compound castings: modelling and experiments,  Materials Science and Technology 22, 2023, 1-11
DOI: 10.1080/02670836.2023.2184591

Nazarahari, A.; Fromm, A. C.; Ozdemir, H. C.; Klose, C.; Maier, H. J.; Canadinc, D. (2023): Determination of thermal conductivity of eutectic Al–Cu compounds utilizing experiments, molecular dynamics simulations and machine learning,  Modelling Simul. Mater. Sci. Eng. 31, 2023 (4), 45001
DOI: 10.1088/1361-651X/acc960

Schäfke, F. P.; Timmann, F.; Klose, C.; Hürkamp, A.; Dröder, K.; Maier, H. J. (2023): Development of EN AW-6082 Metal Foams and Stochastic Foam Modeling for the Individualization of Extruded Profiles,  Journal of Materials Engineering and Performance, 2023
DOI: 10.1007/s11665-023-09031-9

Denkena, B.; Bergmann, B.; Fromm, A.; Klose, C.; Hansen, N. (2022): Influence of the atmosphere and temperature on the properties of the oxygen-affine bonding system titanium-diamond during sintering,  Int J Adv Manuf Technol 120, 2022 11-12, 7187-7196
DOI: 10.1007/s00170-022-09171-7

Fricke, L. V.; Thürer, S. E.; Kahra, C.; Bährisch, S.; Herbst, S.; Nürnberger, F.; Behrens, B.-A.; Maier, H. J.; Klose, C.; Barton, S. (2022): Non-destructive Evaluation of Workpiece Properties along the Hybrid Bearing Bushing Process Chain,  J. of Materi Eng and Perform 11, 2022 (2), 5725
DOI: 10.1007/s11665-022-07598-3

Fromm, A. C.; Barienti, K.; Selmanovic, A.; Thürer, S. E.; Nürnberger, F.; Maier, H. J.; Klose, C. (2022): Oxygen-Free Compound Casting of Aluminum and Copper in a Silane-Doped Inert Gas Atmosphere,  Inter Metalcast 20, 2022 (1), 1701027
DOI: 10.1007/s40962-022-00910-w

Fromm, A., Gawlytta, R., Holzmann, E., Klose, C., Maier, H. J. (2022): Oxidfreier Verbundguss - Optimale Wärmeleitung zwischen artfremden Verbundpartnern,  Giesserei Special 109, 2022, 32-40

Thürer, S. E.; Peters, K.; Heidenblut, T.; Heimes, N.; Peddinghaus, J.; Nürnberger, F.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished Products,  Materials (Basel, Switzerland) 15, 2022 (5), 1692
DOI: 10.3390/ma15051692

Behrens, B.-A.; Uhe, J.; Petersen, T.; Klose, C.; Thürer, S. E.; Diefenbach, J.; Chugreeva, A. (2021): Challenges in the Forging of Steel-Aluminum Bearing Bushings,  Materials 14, 2021 (4), 803
DOI: 10.3390/ma14040803

Gerstein, G.; Kahra, C.; Golovko, O.; Schäfke, F.; Klose, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2021): Hot forming of shape memory alloys in steel shells,  Prod. Eng. Res. Devel. 481–482, 2021 (3), 266
DOI: 10.1007/s11740-021-01024-8

Görzen, D.; Schäfke, F. P.; Blinn, B.; Klose, C.; Maier, H. J.; Beck, T. (2021): Investigating the Influence of Process Parameters on the Mechanical Properties of Extruded Aluminum Tubes by Cyclic Indentation Tests,  Metals 11, 2021 (5), 744
DOI: 10.3390/met11050744

Julmi, S.; Abel, A.; Gerdes, N.; Hoff, C.; Hermsdorf, J.; Overmeyer, L.; Klose, C.; Maier, H. J. (2021): Development of a Laser Powder Bed Fusion Process Tailored for the Additive Manufacturing of High-Quality Components Made of the Commercial Magnesium Alloy WE43,  Materials 11, 2021 (4), 887
DOI: 10.3390/ma14040887

Schäfke, F. P.; Thürer, S. E.; Maier, H. J.; Klose, C. (2021): Development of an Aluminum-Based Hybrid Billet Material for the Process-Integrated Foaming of Hollow Co-Extrusions,  Metals 11, 2021 (9), 1382
DOI: 10.3390/met11091382

Behrens, B.-A.; Maier, H. J.; Klose, C.; Wester, H.; Thürer, S. E.; Heimes, N.; Uhe, J. (2020): Characterization and Modeling of Intermetallic Phase Formation during the Joining of Aluminum and Steel in Analogy to Co-Extrusion,  Metals 10, 2020 (12), 1582
DOI: 10.3390/met10121582

Behrens, B.-A.; Maier, H. J.; Poll, G.; Wriggers, P.; Aldakheel, F.; Klose, C.; Nürnberger, F.; Pape, F.; Böhm, C.; Chugreeva, A.; Coors, T.; Duran, D.; Thürer, S. E.; Herbst, S.; Hwang, J.-I.; Matthias, T.; Heimes, N.; Uhe, J. (2020): Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing,  Prod. Eng. Res. Devel. 14, 2020 5-6, 569-581
DOI: 10.1007/s11740-020-00992-7

Gartzke, A.-K.; Julmi, S.; Klose, C.; Besdo, S.; Waselau, A.-C.; Meyer-Lindenberg, A.; Maier, H. J.; Wriggers, P. (2020): Investigation of degraded bone substitutes made of magnesium alloy using scanning electron microscope and nanoindentation,  Journal of the Mechanical Behavior of Biomedical Materials 109, 2020, 103825
DOI: 10.1016/j.jmbbm.2020.103825

Gartzke, A.-K.; Julmi, S.; Klose, C.; Waselau, A.-C.; Meyer-Lindenberg, A.; Maier, H. J.; Besdo, S.; Wriggers, P. (2020): A simulation model for the degradation of magnesium-based bone implants,  Journal of the Mechanical Behavior of Biomedical Materials 101, 2020, 103411
DOI: 10.1016/j.jmbbm.2019.103411

Maier, H. J.; Julmi, S.; Behrens, S.; Klose, C.; Gartzke, A.-K.; Wriggers, P.; Waselau, A.-C.; Meyer-Lindenberg, A. (2020): Magnesium Alloys for Open-Pored Bioresorbable Implants,  JOM 72, 2020 (5), 1859-1869
DOI: 10.1007/s11837-020-04078-8

Thürer, S. E.; Peddinghaus, J.; Heimes, N.; Caner Bayram, F.; Bal, B.; Uhe, J.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2020): Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound Profiles,  Metals 10, 2020, 1162
DOI: 10.3390/met10091162

Julmi, S.; Krüger, A.-K.; Waselau, A.-C.; Meyer-Lindenberg, A.; Wriggers, P.; Klose, C.; Maier, H. J. (2019): Processing and coating of open-pored absorbable magnesium-based bone implants,  Materials Science and Engineering: C 98, 2019, 1073-1086
DOI: 10.1016/j.msec.2018.12.125

Kleer, N.; Julmi, S.; Gartzke, A.-K.; Augustin, J.; Feichtner, F.; Waselau, A.-C.; Klose, C.; Maier, H. J.; Wriggers, P.; Meyer-Lindenberg, A. (2019): Comparison of degradation behaviour and osseointegration of the two magnesium scaffolds, LAE442 and La2, in vivo,  Materialia 8, 2019, 100436
DOI: 10.1016/j.mtla.2019.100436

Angrisani, G. L.; Taptimthong, P.; Thürer, S. E.; Klose, C.; Maier, H. J.; Wurz, M. C.; Möhwald, K. (2018): Magnetic Properties of Thermal Sprayed Tungsten Carbide-Cobalt Coatings,  Adv. Eng. Mater. 20, 2018 (9), 1800102
DOI: 10.1002/adem.201800102

Behrens, B.-A.; Klose, C.; Chugreev, A.; Heimes, N.; Thürer, S.; Uhe, J. (2018): A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld Seams,  Metals 8, 2018 (9), 717
DOI: 10.3390/met8090717

Demler, E.; Rodman, D.; Rodman, M.; Gerstein, G.; Grydin, O.; Briukhanov, A. A.; Klose, C.; Nürnberger, F.; Maier, H. J. (2018): The Influence of Alternating Low-Cycle Bending Loads on Sheet Properties Having an Hcp Crystal Lattice,  J. of Materi Eng and Perform 27, 2018 (2), 541-549
DOI: 10.1007/s11665-018-3123-2

Julmi, S.; Krüger, A.-K.; Waselau, A.-C.; Meyer-Lindenberg, A.; Wriggers, P.; Klose, C.; Maier, H. J. (2018): Processing and coating of open-pored absorbable magnesium-based bone implants,  Materials Science and Engineering: C 98, 2019, 1073-1086
DOI: 10.1016/j.msec.2018.12.125

Klose, C.; Freytag, P.; Otten, M.; Thürer, S. E.; Maier, H. J. (2018): Thermal Properties of Intermetallic Phases at the Interface of Aluminum-Copper Compound Castings,  Adv. Eng. Mater. 20, 2018 (6), 1701027
DOI: 10.1002/adem.201701027

Otten, M.; Klose, C.; Möhwald, K.; Knödler, P.; Maier, H. J. (2017): Untersuchung der Serientauglichkeit des Schichttransplantationsprozesses zur Herstellung von beschichteten Druckgussbauteilen,  Giesserei Special, 2017 (1), 74-89 Weitere Informationen

Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Behrens, B. A.; Klose, C. (2017): Mechanical Properties of Co-Extruded Aluminium-Steel Compounds,  Key Engineering Materials 742, 2017, 512-519
DOI: 10.4028/www.scientific.net/KEM.742.512

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Huskic, A.; Uhe, J.; Frischkorn, C.; Matthias, T.; Stakhieva, A.; Duran, D.; Thürer, S. E.; Golovko, O.; Klose, C. (2016): Umformtechnische Herstellung hybrider Lagerbuchsen,  wt Werkstattstechnik online 106, 2016 (10), 743-748

Eifler, R.; Seitz, J. M.; Weber, C. M.; Grundke, S.; Reifenrath, J.; Kietzmann, M.; Lenarz, T. H.; Maier, H. J.; Klose, C.; Durisin, M. (2016): MgNd2 alloy in contact with nasal mucosa: an in vivo and in vitro approach,  J Mater Sci: Mater Med 27, 2016 (2), 25
DOI: 10.1007/s10856-015-5636-7

Kiliclar, Y.; Demir, O. K.; Engelhardt, M.; Rozgić, M.; Vladimirov, I. N.; Wulfinghoff, S.; Weddeling, C.; Gies, S.; Klose, C.; Reese, S.; Tekkaya, A. E.; Maier, H. J.; Stiemer, M. (2016): Experimental and numerical investigation of increased formability in combined quasi-static and high-speed forming processes,  Journal of Materials Processing Technology 237, 2016, 254-269
DOI: 10.1016/j.jmatprotec.2016.06.007

Durisin, M.; Seitz, J. M.; Reifenrath, J.; Weber, C. M.; Eifler, R.; Maier, H. J.; Lenarz, T.; Klose, C. (2015): A novel biodegradable frontal sinus stent (MgNd2): a long-term animal study,  European Archives of Oto-Rhino-Laryngology
DOI: 10.1007/s00405-015-3774-7

Kiliclar, Y.; Vladimirov, I. N.; Wulfinghoff, S.; Reese, S.; Demir, O. K.; Weddeling, C.; Tekkaya, A. E.; Engelhardt, M.; Klose, C.; Maier, H. J. (2015): Finite element analysis of combined forming processes by means of rate dependent ductile damage modelling,  International Journal of Material Forming, 2015
DOI: 10.1007/s12289-015-1278-z

Bryukhanov, A.A.; Rodman, M.; Volchok, N.A.; Bryuhanova, Z.A.; Schaper, M.; Klose, C. (2014): Texture and Mechanical Properties of AZ31 Magnesium Alloy Sheets Rolled of Blanks,  Technology of Metals 2, S. 12-18

Bryukhanov, A.A.; Rodman, M.; Volchok, N.A.; Stoyanov, P.P.; Schaper, M.; Klose, C. (2014): Mechanical Properties of AZ31 Alloy Sheets Deformed by Low-Cycle Reverse Bending,  The Physics of Metals and Metallography 115 (1), S. 98-105
DOI: 10.1134/S0031918X14010037

Grittner, N.; Striewe, B.; von Hehl, A.; Engelhardt, M.; Klose, C.; Nürnberger, F. (2014): Characterization of the interface of co-extruded asymmetric aluminum-titanium composite profiles,  Materialwissenschaft und Werkstofftechnik, 2014, 45; S. 1054-1060
DOI: 10.1002/mawe.201400353

Rodman, M.; Bryukhanov, A.A.; Bach, Fr.-W.; Grydin, O.; Klose, C.; Gerstein, G. (2014): Complex Investigations of the Influence of Low Cycle Sign-Variable Bending on the Mechanical Properties of Magnesium Alloy AZ31 Sheet ,  Plastic Deformation of Metals 1, S. 23-27

Shkatulyak, N.M.; Usov, V.V.; Volchok, N.A.; Bryukhanov, A.A.; San’kova, S.V.; Rodman, M.; Schaper, M.; Klose, C. (2014): Effect of Reverse Bending on Texture, Structure and Mechanical Properties of Sheets of Magnesium Alloys with Zinc and Zirconium,  The Physics of Metals and Metallography 115 (6), S. 609-616
DOI: 10.1134/S0031918X1406012X

Hoyer, P.; Angrisani, G. L.; Klose, C.; Bach, Fr.-W.; Hassel, T. (2013): Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien,  In: Materialwissenschaft und Werkstofftechnik 44 (1), S. 84–93.

Klose, C.; Demminger, C.; Mroz, G.; Reimche, W.; Bach, Fr.-W.; Maier, H. J.; Kerber K. (2013): Influence of Cobalt on the Properties of Load-Sensitive Magnesium Alloys,  In: Sensors 13, S. 106–118. Online verfügbar unter http://www.mdpi.com/1424-8220/13/1/106/.

Bryukhanov, A.A; Shkatulyak, N.M; Rodmasn, M.; Shaper, M.; Usov, V.V; Klose, C. (2012): Effect of reversed bending on texture, structure and mechanical properties of low-carbon steels,  In: Technologija Metallov (Technology of metals) (11), S. 19–24.

Hoyer, P.; Angrisani, G. -L; Klose, C.; Bach, Fr.-W.; Hassel, T. (2012): Influence of Aluminium on the Corrosion Behaviour of Binary Magnesium-Aluminium Alloys in Saline Solutions,  Materials and Corrosion, DOI: 10.1002/maco.201206531

Klose, C., Mroz, G., Rodman, M., Kujat, B., Bormann, D., Reimche, W., Bach, Fr.-W. (2012): Magnetic Magnesium Alloys Based on MgZn and SmCo with Sensory Properties,  Advanced Engineering Materials, 14, 1-2 S. 28-34

Klose, C.; Kerber, K.; Otten, M.; Mroz, G.; Reimche, W.; Bach, Fr.-W. (2012): Mit magnetischen Legierungen werden ganze Bauteile zu Sensoren,  In: Maschinenmarkt (39), S. 62–65. Online verfügbar unter http://www.maschinenmarkt.vogel.de/themenkanaele/konstruktion/werkstoffe/articles/379106/.

Klose, C.; Mroz, G.; Angrisani, G. L.; Kerber, K.; Reimche, W.; Bach, Fr.-W. (2012): Casting Process and Comparison of the Properties of Adapted Load-Sensitive Magnesium Alloys,  In: Production Engineering Research & Development. Online verfügbar unter http://link.springer.com/article/10.1007/s11740-012-0413-7.

Usov, V.V; Bryukhanov, P.A; Rodman, M.; Shkatulyak, N.M; Shaper, M.; Klose, C.; Bach, Fr.-W. (2012): Influence of reversed bending on texture, strcture and mechanical properties of α-titanium sheets,  In: Deformation and Fracture of Materials (Deformatsiya I Razrushenie materialov) (9), S. 32–37.

Belski, A.; Gastan, E.; Vahed, N.; Klose, C.; Rodman, M.; Lange, F.; Wurz, M.-C.; Bormann, D.; Rissing, L.; Behrens, B.-A.; Bach, Fr.-W. (2011): Process Principle for the Production of Sintered Dynamic Component-inherent Data Storage,  Production Engineering Vol. 5, Nr. 3, S. 233-240, 2011. Weitere Informationen
DOI: 10.1007/s11740-010-0290-x

Klose, Ch.; Mroz, G.; Rodman, M.; Kujat, B.; Bormann, D.; Reimche, W.; Bach, Fr.-W. (2011): Magnetic Magnesium Alloys based on MgZn and SmCo with Sensory Properties,  Advanced Engineering Materials, 13, S. 1-7
DOI: 10.1002/adem.201100197

Seitz, J.-M., Utermöhlen, D., Wulf, E., Klose, C.; Bach, Fr.-W. (2011): Front Cover Advanced Materials 12/2011,  Advanced Engineering Materials; Vol. 13; Iss. 12; http://onlinelibrary.wiley.com/doi/10.1002/adem.201190032/abstract; doi: 10.1002/adem.201190032

Seitz, J.-M.; Utermöhlen, D.; Wulf, E.; Klose, C.; Bach, Fr.-W. (2011): The manufacture of resorbable suture material from magnesium - drawning and stranding of thin wires,  Advanced Engineering Materials 13, 2011, S. 1087-1095
DOI: 10.1002/adem.201100152

Happel, C.-M.; Klose, C.; Witton, G.; Angrisani, G. L.; Wienecke, S.; Groos, S.; Bormann, D.; Bach, Fr.-W.; Männer, J.; Yelbuz, T. M. (2010): Non-destructive, high-resolution 3D visualization of a cardiac defect in the chick embryo resembling complex heart defect in humans using Micro-Computed Tomography. Double outlet right ventricle (DORV) with left juxtaposition of atrial appendages (LJAA).,  Circulation Vol. 122, Nr. 22, S. 561-564, 2010. Weitere Informationen

Menneking, C.; Isemann, M.; Wissmann, G.; Klose, C.; Bormann, D.; Bach, Fr.-W.; Behrens, P. (2007): Neue poröse Chitosan-Kompositmaterialien,  Biomaterialien Vol. 8, Nr. 3, S. 249.

Stefanowski, F.; Steinhoff, T.; Köhnen, L.; Klose, C.; Schmidt, M.; Maier, H. J.; Nyhuis, P. (2025): Use Phase-Oriented Innovation Assessment in Early Development Stages: A Value-In-Use Approach for Thermal Interface Materials,  Advances in Production Management Systems. Cyber-Physical-Human Production Systems: Human-AI Collaboration and Beyond - 44th IFIP WG 5.7 International Conference, APMS 2025, 31.08.-04.09.2025, Kamakura, Japan
DOI: 10.1007/978-3-032-03534-9_39

Dewidar, A.; Mohnfeld, N.; Wester, H.; Schäfke, F.; Klose, C.; Maier, H. J.; Uhe, J.; Drossel, W. G.; Ihlenfeld, S.; Dix, M. (2024): Numerical and Experimental Investigation on Co-extrusion of Coaxial Aluminum-Copper Joints,  Beitrag in WGP Jahreskongress 2024, Chemnitz, Sachsen, Deutschland
DOI: 10.1007/978-3-031-86893-1_22

Fromm, A.; Selmanovic, A.; Gawlytta, R.; Klose, C.; Maier, A. (2023): Charakterisierung von im Kokillenguss hergestellten Aluminium-Kupfer-Verbunden hinsichtlich der Wärmeleitfähigkeit,  In: referierten Tagungsband im Rahmen der CZM-Schriftenreihe „Fortschrittsberichte der Materialforschung und Werkstofftechnik“, 2023, S. 1-11

Steinhoff, T.; Hölscher, L. V.; Klose, C.; Hassel, T. (2023): Corrosion Behavior of an Additively Manufactured Functionally Graded Material,  Innovative Product Development by Additive Manufacturing, 2023, 247-260
DOI: 10.1007/978-3-662-69327-8_16

Fromm, A.; Maier, H.J.; Klose, C. (2022): Volumetric Characterization of an Aluminum and Copper Composite by X-Ray Microscopy,  MSE 2022, Darmstadt, 27.09.2022-29.09.2022

H. J. Maier, M. R. Diaz, K. Möhwald, A. Fromm, R. Gawlytta, C. Klose (2022): Sauerstofffreie Produktion in fünf von sechs Fertigungshauptgruppen,  In: T. Königstein, A. W. (Hrsg.): Tagungsband 8. GTV Kolloquium Thermisches Spritzen & Laser Cladding. GTV Verschleißschutz GmbH, Luckenbach, 2022, S. 31-41

Schäfke, F. P.; Engelhardt, M.; Grittner, N.; Thürer, S. E.; Klose, C. (2022): The ECARP Process and Its Influence on the Microstructure of Pure Mg and the Mg Alloy AZ31,  Proceedings of the Twelfth International Aluminum Extrusion Technology Seminar (ET '22), May 3-5, Orlando, Florida 1, 2022, 723-731

Thürer, S. E.; Uhe, J.; Schäfke, F. P.; Heimes, N.; Nürnberger, F.; Behrens, B.-A.; Klose, C. (2022): Lateral Angular Co-Extrusion of Aluminum and Steel for the Manufacturing of Coaxial Composite Profiles,  Proceedings of the Twelfth International Aluminum Extrusion Technology Seminar (ET '22), May 3-5, Orlando, Florida 1, 2022, 183-193

Behrens, B.-A.; Uhe, J.; Thürer, S. E.; Klose, C.; Heimes, N. (2020): Development of a Modified Tool System for Lateral Angular Co-Extrusion to Improve the Quality of Hybrid Profiles,  In: 23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 224–230
DOI: 10.1016/j.promfg.2020.04.200

Thürer, S. E.; Heimes, N.; Uhe, J.; Behrens, B.-A.; Klose, C. (2020): Herstellung koaxialer Verbundprofile mittels Lateral Angular Co-Extrusion,  In: Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020, Posterbeitrag, TEWISS, Garbsen, 2020, S. 115-116

Augustin, J. M. B.; Julmi, S.; Buchegger, L.; Klose, C.; Waselau, A. C.; Meyer-Lindenberg, A. (2019): In-vivo Vergleich der Degradation und Osseointegration von LAE442-Magnesiumschwämmen mit zwei verschiedenen Porengrößen,  In: Osteologie 2019. Frankfurt am Main. 28.05.-30.05.19. Georg Thieme Verlag KG, Stuttgart, 2019, S. 60-61
DOI: 10.1055/s-0039-1680000

Behrens, B.-A.; Klose, C.; Thürer, S.; Heimes, N.; Uhe, J. (2019): Numerical modeling of the development of intermetallic layers between aluminium and steel during co-extrusion,  In: Lander Galdos, L. et al. (Hrsg.): Proceedings of the 22nd international ESAFORM conference on material forming: ESAFORM 2019. Vitoria-Gasteiz, Spanien. 08.05. – 10.05.2019, S. 40029
DOI: 10.1063/1.5112563

Pape, F.; Coors, T.; Chugreev, A.; Matthias, T.; Uhe, J.; Thürer, S.; Klose, C.; Behrens, B.-A. (2019): Ultrasonic evaluation of tailored forming bearing components,  In: 12th International Symposium on Rolling Bearing Steels – Progress in Bearing Steel Metallurgical Testing and Quality Assurance. Denver. 15.05.-17.05.2019
DOI: 10.13140/RG.2.2.28034.53443

Behrens, B.-A.; Klose, C.; Chugreev, A.; Thürer, S. E.; Uhe, J. (2018): Numerical investigations on the lateral angular co-extrusion of aluminium and steel,  In: Fratini, L. et al. (Hrsg.): Proceedings of the 21st International ESAFORM Conference on Material Forming. ESAFORM 2018. Palermo. AIP Conference Proceedings 1960, 2018 (1), S. 30001
DOI: 10.1063/1.5034844

Golovko, O. M.; Frolov, Y. V.; Andreiev, V. V.; Klose, C.; Nürnberger F. (2018): Manufacturing of seamless tubes of the alloy Al-5Mg-0,2Sc by direct extrusion and sink drawing,  In: Materials Science and Engineering, MSE 2018. European Congress and Exhibition on Advanced Materials and Processes. Darmstadt. 26-28.09.2018

Krüger, A. K.; Julmi, S.; Klose, C.; Besdo, S.; Maier, H. J.; Wriggers, P. (2018): Simulation of bone ingrowth into bone substitutes on implant level length scale,  In: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). München. 19.3.- 23.3.2018, Proc. Appl. Math. Mech. 18, 2018 (1), e201800297
DOI: 10.1002/pamm.201800297

Behrens, B.-A.; Bouguecha, A.; Moritz, J.; Bonk, C.; Stonis, M.; Klose, C.; Blohm, T.; Chugreeva, A.; Duran, D.; Matthias, T.; Golovko, O.; Thürer, S. E.; Uhe, J. (2017): Aktuelle Forschungsschwerpunkte in der Massivumformung,  In: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017. TEWISS, Garbsen, 2017, S. 15-32

Demminger, C.; Klose, C. (2017): Mechanical Properties and Fatigue Strength of Extruded Cobalt-Containing Magnetic Magnesium Alloys,  In: Solanki, K. N. et al. (Hrsg.): Magnesium Technology 2017. Springer International Publishing, 2017, S. 537-542
DOI: 10.1007/978-3-319-52392-7_74

Eifler, R.; Schäfke, F.; Maier, H. J.; Klose, C. (2017): Biocompatible Magnesium Alloy ZNdK100 - Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications,  In: Solanki, K. N. et al. (Hrsg.): Magnesium Technology 2017. Springer International Publishing, 2017, S. 323-327
DOI: 10.1007/978-3-319-52392-7_46

Julmi S., Klose C., Krüger A.-K., Wriggers P., Maier H.J. (2017): Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants,  In: TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings. Springer International Publishing; Springer, Cham, 2017, S. 307-317
DOI: 10.1007/978-3-319-51493-2_29

Krüger, A. K.; Julmi, S.; Klose, C.; Besdo, S.; Wriggers, P. (2017): Simulation of the change in Mechanical Properties of Degradable Bone Implants,  In: Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry. Stuttgart. 11.10.- 13.10.2017

Rodman, D.; Demler, E.; Rodman, M.; Gerstein, G.; Briukhanov, A. A.; Grydin, O.; Klose, C.; Nürnberger, F. (2017): Investigation Of The Sign-Variable Low-Cyclic Bending Deformation Influence On Sheet Properties Of Materials With A Hexagonal Crystal Lattice,  In: Ya. V. Frolov (Hrsg.): Plastic deformation of metals. Accent PP, Dnipro, 2017, Seite 47

Thürer, S. E.; Golovko, O.; Bonk, C.; Behrens, B.-A.; Bouguecha, A.; Klose, C.; Uhe, J. (2017): Einfluss der lokalen Mikrostruktur auf die Umformbarkeit stranggepresster Werkstoffverbunde,  In: Behrens, B.-A. (Hrsg.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, 15.03.-16.03.2017, Posterbeitrag. TEWISS, Garbsen, 2017, S. 192

Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Klose, C.; Behrens, B.-A.; Maier, H. J. (2017): Co-extrusion of semi-finished aluminium-steel compounds,  In: Brabazon, D.; Naher, S.; Ahad, I. U. (Hrsg.): Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. 26-28 April 2017, Dublin, Ireland. AIP Publishing LLC, Melville, New York, 2017, S. 140002
DOI: 10.1063/1.5008158

Demminger, C.; Klose, C.; Maier, H. J. (2016): Microstructure and Magnetic Properties of Cobalt and Zinc Containing Magnesium Alloys,  In: Procedia Technology. 3rd International Conference on System-Integrated Intelligence. Paderborn. 13.06. - 15.06.2016. Elsevier, Amsterdam, 2016, S. 35-42
DOI: 10.1016/j.protcy.2016.08.006

Eifler, R.; Durisin, M.; Klose, C.; Lenarz, T.; Maier, H. J. (2016): Degradation of MgF2-Coated and Uncoated MgNd2 Specimens in Contact with Nasal Mucosa,  In: 145. TMS Annual Meeting & Exhebition, Magnesium technology 2016. John Wiley & Sons, Inc., Hoboken, New Jersey, 2016, S. 331-335

Lachmayer, R.; Zghair, Y. A.; Klose, C.; Nürnberger, F. (2016): Introducing Selective Laser Melting to Manufacture Machine Elements,  In: Marjanović, D. et al. (Hrsg.): Proceedings of the DESIGN 2016 14th International Design Conference. Dubrovnik, Croatia. 16.05.-19.05.2016, S. 831-842

Engelhardt, M.; Behne, D.; Grittner, N.; Neumann, A.; Reimche, W.; Klose, C. (2015): Non-destructive Testing of Longitudinal and Charge Weld Seams in Extruded Aluminum and Magnesium Profiles,  Materials Today: Proceedings. Aluminium Two Thousand World Congress and International Conference on Extrusion and Benchmark ICEB 2015, 2015, S. 4866-4873
DOI: 10.1016/j.matpr.2015.10.037

Klose, C.; Demminger, C.; Maier, H. J. (2015): Microstructure and Properties of Cobalt- and Zinc-Containing Magnetic Magnesium Alloys Processed by High-Pressure Die Casting,  In: Manuel, M. V. et al. (Hg.): Magnesium Technology 2015. Proceedings of a symposium sponsored by Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS), 144th Annual Meeting & Exhibition, 15.-19.03.2015, Orlando, Florida. John Wiley & Sons, Inc., Hoboken, New Jersey, 2015; S. 451-454

Demminger, C.; Klose, C.; Taptimthon, P.; Maier, H. J. (2014): Material-inherent data storage using magnetic magnesium-cobalt alloys,  Procedia Technology 5, 2nd International Conference of System-Integrated Intelligence: Challenges for Product and Production Engineering Bremen, 2.-04.07.2014, S. 188-197
DOI: 10.1016/j.protcy.2014.09.071

Eifler, R.; Seitz, J. M.; Klose, C.; Bach, F.-W. (2014): Drawing and Stranding of Magnesium Wires for use as a Resorbable Suture Material,  48. Jahrestagung der deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Hannover, 8.-10.10.2014, Biomedical Engineering/Biomedizinische Technik 59 (S1), S.1186
DOI: 10.1515/bmt-2014-5014

Engelhardt, M.; Klose, C. (2014): Experimental investigations on forming limits for aluminium alloy sheet metal at various strain rates,  In: H. Huh und A. E. Tekkaya (Hg.): High Speed Forming 2014. Proceedings of the 6th International Conference. Organizing committee of the 6th International Conference on High Speed Forming, May 26–29 2014, Korea Advanced Institute of Science and Technology, Department of Mechanical Engineering. Daejeon, Korea. pp. 11–20.

Grittner, N.; Engelhardt, M.; Neumann, A.; Klose, C.; Hübner, S.; Behrens, B.-A.; Maier, H. J. (2014): A novel process for producing large scale Mg-sheets,  Magnesium Technology 2014, TMS (The Minerals, Metals & Materials Society), Wiley Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada, (2014), S. 289-292
ISBN: 978-1-118-88816-2

Klose, C.; Demminger, C.; Maier, H. J. (2013): Sensorische Werkstoffe - Erfassen und Nutzen mechanischer Beanspruchungsdaten im Lebenszyklus gentelligenter Bauteile,  In: 8. Aachener Oberflächentechnik Kolloquium 2013. Herzogenrath (K. Bobzin (Hg.)), Shaker, 2013, S. 59–66

Klose, C.; Demminger, C.; Zwoch, S.; Reimche, W.; Bach, Fr.-W; Maier, H. J.; Kerber, K. (2013): Measurement of static and dynamic loads utilizing sensory magnesium components,  In: Euro Intelligent Materials 2013 (E. Quandt und C. Selhuber-Unkel (Hg.)), DGM, 2013, S. 57

Engelhardt, M.; Grittner, N.; Klose, C.; Bach, Fr.-W. (2012): Influence of Process Fluctuations on Weld Seam Properties in Aluminum Alloy Extrusion,  In: H. Weiland, A. D. Rollet und W. A. Cassada (Hg.): ICAA13: 13th International Conference 2012. Hoboken, NJ, USA: John Wiley & Sons, Inc., S. 1843–1850.

Engelhardt, M.; Haverkamp, H.; Klose, C.; Bach, Fr.-W. (2012): Development of a Pneumatic High-Speed Nakajima Testing Device,  In: A. E. Tekkaya, G. Daehn und M. Kleiner (Hg.): High Speed Forming 2012. Proceedings of the 5th International Conference. Organizing committee of the 5th International Conference on High Speed Forming, April 24 – 26 2012, Technische Universität Dortmund, Faculty of Mechanical Engi-neering, Institute of Forming Technology and Lightweight Construction and De-partment of Materials Science and Engineering of the Ohio State University. Dortmund, S. 155–164.

Klose, C.; Mroz, G.; Kerber, K.; Reimche, W.; Bach, Fr.-W. (2012): Production and Comparison of Adapted Load-sensitive Magnesium Alloys,  In: B. Denkena, J. Gausemeier und B. Scholz-Reiter (Hg.): SysInt - 1st Joint International Symposium on System-integrated Intelligence. New Challenges for Production Engineering 27.-29.06.2012. CIRP The International Academy for Production Engineering. Garbsen: PZH Verlag, S. 56–58.
ISBN: 978-3-943104-59-2

Plorin, T.; Bormann, D.; Haverkamp, H.; Klose, C.; Bach, Fr.-W. (2011): Herstellung ultraleichter Magnesium-Verbundprofile,  Heinz Palkowski (Hg.): Abschlusskolloquium des Sonderforschungsbereichs 675: Erzeugung hochfester metallischer Strukturen und Verbindungen durch gezieltes Einstellen lokaler Eigenschaften. TU Clausthal, Institut für Metallurgie. Clausthal-Zellerfeld. S. 129 - 134.

Biskup, C.; Hassel, T.; Klose, C.; Bach, Fr.-W. (2010): AWIJ Cutting of cortical bone screws,  20th International Conference on Water Jetting. Graz, Austria 20th – 22nd October 2010, S. 201-212
ISBN: 978-1-85598-121-8

Bormann, D.; Bach, Fr.-W.; Klose, C.; Rodman, M.; Reimche, W.; Mroz, G.; Behrens, B.-A.; Weilandt, K.; Jocker, J. (2010): Werkstoffe mit sensorischen Eigenschaften für optimierte Wartungsintervalle,  Neue Fertigungstechnologien in der Luft- und Raumfahrt Berichte aus dem IFW Vol. 2010,8, S. 478-486. Garbsen: PZH Produktionstechn. Zentrum, 2010.
ISBN: 978-3-941416-78-9

Angrisani, G. L.; Klose, C.; Bormann, D.; Bach, Fr.-W.; Kainer, K. U. (Hrsg.) (2009): Influence of Alloy Composition and Heat Treatment on Damping Characteristics of Magnesium Alloys,  8th International Conference on Magnesium Alloys and their Applications. Deutsche Gesellschaft für Materialkunde; International Conference on Magnesium Alloys and Their Applications. Weinheim: Wiley-VCH, S. 270–281
ISBN: 3-527-32732-0

Bormann, D.; Rodman, M.; Klose, C.; Kerber, K.; Reimche, W.; Wurz, M. C.; Bach, Fr.-W. (2009): Soft and Hardmagnetic Magnesium Materials as Components of Structural Elements,  Kainer, K. U. (Hrsg.): Magnesium; 8th International Conference on Magnesium Alloys and their Applications, S. 27-32. Weinheim: Wiley-VCH, 2009.
ISBN: 3-527-32732-0

Klose, C.; Angrisani, G. L.; Bormann, D.; Bach, Fr.-W. (2009): Vibration Treatment for Microstructural Grain Refinement of Magnesium Alloys using the Low Pressure Die Casting Process,  8th International Conference on Magnesium Alloys and their Applications, S. 275-281. Weinheim: Wiley-VCH, 2009.
ISBN: 3-527-32732-0

Klose, C.; Angrisani, G. L.; Wienecke, S.; Männer, J.; Yelbuz, T. M.; Bormann, D.; Bach, Fr.-W. (2008): 3D-Darstellung des embryonalen Herzen mittels Mikro-Computer-Tomographie (Mikro-CT): Erste Ergebnisse einer Machbarkeitsstudie,  Jochen Weil (Hg.): 40. Jahrestagung der Deutschen Gesellschaft für Pädiatrische Kardiologie, 01.09.2008. Clinical Research in Cardialogy. Sonderdruck. Steinkopff (97), S. 674.

Wadouh, T.; Besdo, S.; Klose, C.; Glasmacher, B. (2008): Zerstörungsfreie Untersuchungen an explantierten Herzklappenprothesen,  M. Lange (Hg.): Biomaterials NRW. Fundamentals and Clinical Applications. 10. Jahrestagung der deutschen Gesellschaft für Biomaterialien 12. - 14.03.2008 Essen. Universität Duisburg-Essen; Deutsche Gesellschaft für Biomaterialien. Duisburg, S. 87.

Heimes, N.; Uhe, J.; Thürer, S. E.; Wester, H.; Maier, H. J.; Klose, C.; Behrens, B.-A. (2021): Numerical Development of a Tooling System for the Co-extrusion of Asymmetric Compound Profiles on a Laboratory Scale,  In: Behrens, B.-A. et al. (Hrsg.): Production at the leading edge of technology. WGP2020, Dresden, 23.09.-24.09.2020. Springer, Berlin, 2021, S. 66-75
DOI: 10.1007/978-3-662-62138-7_7